What is Client-Side API for RMI on the Java Card Platform

What is Client-Side API for RMI on the Java Card Platform ?
And what is host software ?

Your post is weird: you seem not to agree with yourself O_o
OF COURSE sim cards have CPUs, otherwise how would you run an OS or a java vm on them?
to drive the wifi there will be a proprietary api, just like mifare access on normal cards.
the OS should manage the wiki stack in C/asm and expose javacard entry points. only "should" because this is only a press release.

Similar Messages

How to get client side validation for double range and double field in stru

Hi,
I have achieved client side validation by using <html:javascript formName=""/>
All fields shows client side validation but double field and double range field is not shows client side validation but shows server side validation.
I am using Liferay jboss server.
Please tell me a way to achieve client side validation for double field and double range.
Thanks & Regards,
Brijesh Baser

I see in the query component there is a QueryListener and a QueryOperationListener. Have you tried letting Jdeveloper create methods for these in some backing bean, and putting in some debug code to see when these methods run? I would think one of them could very well be used to validate the input, somehow; if the input were bad you could just raise an exception and pass your error message, I bet.
If not...
I am pretty sure that there is an appendix in the Fusion Developer's Guide for Forms developers turned to Java...you might look at what it says for post query. I know in the 10.1.3.0 equivalent documentation, they gave reference to a method in the ViewObject which fired for each record after a query was run. You could definitely intercept this query return from there. In fact doing something like this may be something like what Frank N. was intending when he mentioned ViewObjects "validation". Not sure though. I am still learning what new features there are in 11g adf/bc.
Good luck.

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

Hi,can anyone guide me on what is client side database & grid database.....

what is client side database & grid database..........and what is the difference between Dataguard and stand by database() these are interview questions.........i am dba learner pls explanin me.......
thanks u all...

I'm not trying to be funny or mean, but, in my experience, if you don't know what a product/tool/component is, then you should say so. If you give the impression that you do know about a technology in your interview and you are hired based upon that premise, you might find yourself struggling mightily when your employer asks you to 'implement DataGuard by the end of the week'...
Just some advice. Good luck in your interview!

Client Side Support for NTLM

Hi
I have been trying to read my mails from Microsoft Exchange Server by using java library developed by Various Software Products like Javamail,Mousetrap,Icemail,Jscape,JavaMail, and IPWorks.
On our server side we are having "Secure Password Authentication"(NTLM) in order to encode and decode mails, So we need to use the same Authorisation Mechanism on Client Side so that we can read mails from the Exchange Server.
( As Server Side Autherisation Mechanism should match with Client Side Autherisation Mechansim to read mails from Exchange Server)
On Client Side, I have tried using the software products that i specified above. All the above listed products are supporting CRAMMD5,PLAIN,LOGIN,DIGEST-MD5 Autherisation Mechanisms But, No one are supporting NTLM Autherisation.
As we have NTLM autherisation mechanism set on the server side, so i need to use the same Autherisation mechanism on client side too.
The current Exchange server version we are using is " 5.5.2654.50". I have also tried installing the Evaluation version of Microsoft Exchange server 2003 and checked whether it supports any other authentication other than NTLM. I found that, it is allowing me to use either "Clear Text" or "NTLM".
could anyone help me in providing any Software Product (Java Library) that supports "NTLM Autherisation" to read mails from Exchange Server.
Protocol that we are using - IMAP
I will be greatful if anyone can help me in this
thanks
Srinivasa Kanchiraju
Dynalivery Corporation
Saint Louis MO - 63043
Tel - 314 205 8995 ext 21

The problem is that NTLM is a Microsoft proprietary authentication mechanism.
I believe there are some products in the JavaMail Third Party Products page
that support NTLM.
http://java.sun.com/products/javamail/Third_Party.html

What formats of videos can be played from the SDHC card on the Zen?

CWhat formats of videos can be played from the SDHC card on the Zen?' I realize that the SDHC card data is not integrated into the same functions as the data on the internal dri've. That's not my issue.
My issue is trying to find [color="#ff0000"]ANY videos that can be played [color="#ff0000"]AT ALL from the SDHC card.
I've been e-mailing with technical support for 2 weeks but it seems all I get is the run-around (and I different technician) with each e-mail reply.
First they tell me I have to get my videos from Amazon Unbox in order to play them. Then they tell me that, no, the Amazon ones don't play from the SDHC card.
Can anyone tell me what format or what source I can use to actually play videos from the SDHC card?

GRe: What formats of videos can be played from the SDHC card on the Zen?]
why_itsme wrote:
I realize that the SDHC card data is not integrated into the same functions as the data on the internal dri've. That's not my issue.
My issue is trying to find [color="#ff0000"]ANY videos that can be played [color="#ff0000"]AT ALL from the SDHC card.
I've been e-mailing with technical support for 2 weeks but it seems all I get is the run-around (and I different technician) with each e-mail reply.
First they tell me I have to get my videos from Amazon Unbox in order to play them. Then they tell me that, no, the Amazon ones don't play from the SDHC card.
Can anyone tell me what format or what source I can use to actually play videos from the SDHC card?
The specs are here? http://us.creative.com/products/prod...duct=6999&nav=

Please ..give me some example APDU for writing data to java card

morning everybody .. :)
I need some example APDUs for writing data to java card. (CLA || INS || P1 || P2 etc)..
please..thank for your attention .. god blessing u.

Hi,
did you check some articles about JavaCards:
[Understanding Java Card 2.0|http://www.javaworld.com/cgi-bin/mailto/x_java.cgi?pagetosend=/export/home/httpd/javaworld/javaworld/jw-03-1998/jw-03-javadev.html&pagename=/javaworld/jw-03-1998/jw-03-javadev.html&pageurl=http://www.javaworld.com/javaworld/jw-03-1998/jw-03-javadev.html&site=jw_core]
[How to write a Java Card applet: A developer's guide|http://www.javaworld.com/cgi-bin/mailto/x_java.cgi?pagetosend=/export/home/httpd/javaworld/javaworld/jw-07-1999/jw-07-javacard.html&pagename=/javaworld/jw-07-1999/jw-07-javacard.html&pageurl=http://www.javaworld.com/javaworld/jw-07-1999/jw-07-javacard.html&site=jw_core]
Hope it helps,
Tex

What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

If the iPhone was unlocked unofficially, it has been locked to original carrier again.

ISO7816 for the Java Card Development Kit

I'm having problems compiling the sample applets for the Java Card Development Kit (2.1.2). I keep getting the error that anything related to ISO7816 is not recognized. Is there something else I need to have in order to run this?

You must have not Downloaded the Java Card API211 &Must not Have Given the class path.
Neelesh

Client side event for h:outputText... and other JSF component

Hello friends...
I need client side (to use Java script ) event for change in <h:outputText /> or <h:inputText...>.
I want to open a popup window when there is a change in there. I donot want to use onblur() for this. Is there any thing for achiev it.
Thanks.
Regard
Roshan Lal ( I don't know why there is "DOG" display in LIST )
:-)

Hi Jacek,
Unfortunately I think you may be stuck extending Renderer. Another possibility is creating your component via a template, which will be available in JSF 2.0. However, as JSF 2.0 won't be out for a while... you can use JSFTemplating in the meantime:
http://java.sun.com/developer/technicalArticles/J2EE/jsf_templating/
http://www.theserverside.com/tt/articles/article.tss?l=JSFTemplateComponent
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

How to 'client-side include for secondary menu on page'

Hi there.
The following page refers:
test page for early
draft
The linked page is in fact a DW CS3 tmp preview file, for
that reason the CSS has been pulled into the html file by DW, it
won't look that way in the eventual page file.
After lengthy battles with the Spry Horizontal menu, I
eventually resorted to Pop Menu Magic 2 (PPM2) to generate menus.
I'm very happy with the product (I'm not looking for PPM2 support,
but rather support pertaining to CSS-driven menu's in general
relating to caching). I started out with a single main navigation
menu, which was very comprehensive - but also very big (ito file
size). I was hoping to cache a part of the menu on the client-side
to reduce download times once the site visitor has downloaded the
first page in the site (where he enters the site is not
applicable). But that proved impossible (I think...).
I then followed some advice to break up my main navigation
menu, keep only the more important stuff in there and rather
distribute the lower levels of the main menu into their own
dedicated menus. From there the page linked above.
The main menu at the top is fine, no problem there. On the
left below the masthead I've created two menus, one above the other
(it displays as a single menu but the first menu ends above the
"Other tour lists" item). The first of these two menus contains the
bulk of the heavy navigation elements (±160kb of the total
page file size of 220kb). The div info that applies to this menu =
<div id="p7PMM_2" class="p7PMMv06">. I'd love to cache this
menu, either in full or the bulk thereof, on the client-side. That
is implement a client-side include. When a visitor first enters our
site the include file with the 160kb (secondary) menu gets
downloaded together with CSS stylesheets, etc. When the visitor
links through to a following page in our site, his machine
(client-side) dishes up the menu to that next page without having
to download it from our hosting server a second time.
Is this possible and how? Any and all suggestions will be
appreciated!
Our clients are mostly wealthy and thus probably (virtually)
all have high-speed broadband connections. I seriously doubt that
any of them are running dial-up connections. Thus this issue is not
going to sink our site. But I'd love to cut page file size if
possible.
Furthermore, I'm not too worried about the small portion of
visitors that may have their javascript disabled in their browsers.
The main navigation menu at the top of the page will still allow
them to navigate the site. Much the same goes for SEO.
I've tried one or two CSI javascripts and succeeded in
actually getting the relevant tags and contents inserted in the
html document, but the javascript would then 'break'. That is all
the coding and menu contents would be there, but the javascript
won't function (menu's won't pop / fly-out). I'm a little clueless
when it comes to Javascript, and many other things :-), but I
suspect that the Javascript in the include file does not get
called. If the Javascript is kept in the html file, the menu
content (elements) in the include file arrives in the html file
after the relevant script has been called and doesn't get
rendered??
Once again any help / suggestions will be appreciated!

> But that proved impossible (I
> think...).
Even without doing anything on your part, the images, the
CSS, and the
javascript is already cached client-side. You cannot cache
any of the
structural code client-side.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"afrilux" <[email protected]> wrote in
message
news:[email protected]...
> Hi there.
>
> The following page refers:
http://www.afrilux.co.za/test/1/dev2.htm
>
> The linked page is in fact a DW CS3 tmp preview file,
for that reason the
> CSS
> has been pulled into the html file by DW, it won't look
that way in the
> eventual page file.
>
> After lengthy battles with the Spry Horizontal menu, I
eventually resorted
> to
> Pop Menu Magic 2 (PPM2) to generate menus. I'm very
happy with the product
> (I'm
> not looking for PPM2 support, but rather support
pertaining to CSS-driven
> menu's in general relating to caching). I started out
with a single main
> navigation menu, which was very comprehensive - but also
very big (ito
> file
> size). I was hoping to cache a part of the menu on the
client-side to
> reduce
> download times once the site visitor has downloaded the
first page in the
> site
> (where he enters the site is not applicable). But that
proved impossible
> (I
> think...).
>
> I then followed some advice to break up my main
navigation menu, keep only
> the
> more important stuff in there and rather distribute the
lower levels of
> the
> main menu into their own dedicated menus. From there the
page linked
> above.
>
> The main menu at the top is fine, no problem there. On
the left below the
> masthead I've created two menus, one above the other (it
displays as a
> single
> menu but the first menu ends above the "Other tour
lists" item). The first
> of
> these two menus contains the bulk of the heavy
navigation elements (?160kb
> of
> the total page file size of 220kb). The div info that
applies to this menu
> =
> <div id="p7PMM_2" class="p7PMMv06">. I'd love to
cache this menu, either
> in
> full or the bulk thereof, on the client-side. That is
implement a
> client-side
> include. When a visitor first enters our site the
include file with the
> 160kb
> (secondary) menu gets downloaded together with CSS
stylesheets, etc. When
> the
> visitor links through to a following page in our site,
his machine
> (client-side) dishes up the menu to that next page
without having to
> download
> it from our hosting server a second time.
>
> Is this possible and how? Any and all suggestions will
be appreciated!
>
> Our clients are mostly wealthy and thus probably
(virtually) all have
> high-speed broadband connections. I seriously doubt that
any of them are
> running dial-up connections. Thus this issue is not
going to sink our
> site. But
> I'd love to cut page file size if possible.
>
> Furthermore, I'm not too worried about the small portion
of visitors that
> may
> have their javascript disabled in their browsers. The
main navigation menu
> at
> the top of the page will still allow them to navigate
the site. Much the
> same
> goes for SEO.
>
> I've tried one or two CSI javascripts and succeeded in
actually getting
> the
> relevant tags and contents inserted in the html
document, but the
> javascript
> would then 'break'. That is all the coding and menu
contents would be
> there,
> but the javascript won't function (menu's won't pop /
fly-out). I'm a
> little
> clueless when it comes to Javascript, and many other
things :-), but I
> suspect
> that the Javascript in the include file does not get
called. If the
> Javascript
> is kept in the html file, the menu content (elements) in
the include file
> arrives in the html file after the relevant script has
been called and
> doesn't
> get rendered??
>
> Once again any help / suggestions will be appreciated!
>
>

Could not create client side connection for PDBORCL

Dear all,
we are using oracle database 12c enterprise edition on widows server 2012 standard edition 64bits.
we cannot make a connection from client to the PDBORCL using Net Configuration Assistant.
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.hct.org)
PDBORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP426-ORATEST)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = PDBORCL.hct.org)
LISTNER.ORA
# listener.ora Network Configuration File: C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Administrator\product\12.1.0\dbhome_1\bin\oraclr12.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
On my client side, i open NET CONFIGURATION ASSISTAN,
click on LOCAL NET SERVICE NAME CONFIGURATION,
select ADD and click next
on the service name type PDBORCL
select TCP and click next
on the hostname, put the name of the server which is HP426-ORATEST and click next
when i click on YES PERFORM TEST, it give the following error
Connecting...ORA-12170: TNS:Connect timeout occurred
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
we could ping the HP426-ORATEST using cmd on my client.
kindly guide us.
Thank you.

LSNRCTL SERVICES
C:\Users\Administrator>LSNRCTL SERVICES
LSNRCTL for 64-bit Windows: Version 12.1.0.1.0 - Production on 23-APR-2014 23:23
:39
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.153.103.202)(PORT=152
1)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "orclXDB.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: HP426-ORATEST, pid: 3088>
(ADDRESS=(PROTOCOL=tcp)(HOST=HP426-ORATEST.hct.org)(PORT=59070))
Service "pdborcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
LSNRCTL STATUS
C:\Users\Administrator>LSNRCTL STATUS
LSNRCTL for 64-bit Windows: Version 12.1.0.1.0 - Production on 23-APR-2014 23:24
:38
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.153.103.202)(PORT=152
1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 12.1.0.1.0 - Produ
ction
Start Date 23-APR-2014 03:44:26
Uptime 0 days 19 hr. 40 min. 16 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Administrator\product\12.1.0\dbhome_1\network\a
dmin\listener.ora
Listener Log File C:\app\Administrator\diag\tnslsnr\HP426-ORATEST\listen
er\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=HP426-ORATEST.hct.org)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=HP426-ORATEST.hct.org)(PORT=5500))(
Security=(my_wallet_directory=C:\APP\ADMINISTRATOR\admin\orcl\xdb_wallet))(Prese
ntation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "pdborcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully

Link only with client side method for ImageArea

Hi,
I wanted to made an ImageMap and on each ImageArea set Link ONLY with client side method. But it doesnt work, no method is called. (in html is rendered only onClick="return false;"). When i tried to set some server side method it is working(server method is called). Is this righ behavior?
If it is how should code for calling only client side method look like?(now i am writing that map into html by myself, but it is not nice solution ).
And next question related to this, where is defined relationship betwenn htmlb components and java classes rendering them? i wanted to look in implemenattion of imagemap and change it for my purposes but i dont know how.
thanks
JJ

I had also some problems with the ImageMap.
I ended up by using the "HTML-way"
<map name="Innen">
<area shape="rect" coords="460,46,494,365" href="#" title="W7" alt="W7" onclick='alert("Nicht belegt")'>
<area shape="rect" coords="429,92,457,365" href="#" title="W3" alt="W3" onclick='alert("Nicht belegt")'>
</map>
<img align="LEFT" src=<%= """ + componentRequest.getWebResourcePath()+ "/images/spannbacke_innen.gif" + """ %> width="500" border="0" alt="Karte" usemap="#Innen">
Walter

Refreshing client side templates for EVHOT functionality

Dear All,
This query is regarding using EVHOT functionality in BPC for Excel. This functionality works only for files present in the local machine. How do I refresh client side templates so that new templates get downloaded to client machines and can be opened using EVHOT? Does simply restarting BPC for Excel in client machines work?

Hello,
I have seen many customers struggle with this same issue and solved it by performing the following steps.
1.Open BPC for Excel
2.From the eTools menu select Open Template Library
3.Open the template
4.From the eTools menu select Save Template Library and overwrite template on the SERVER
5.You will be prompted to update template version, choose YES
6.Clear local application information from the etools -> options menu
7.Open Admin and increment template version 1 then click update version
8.Login to BPC for Excel
I hope this helps!
Tom Chelednik
Enterprise Performance Management RIG
SAP BusinessObjects Division

ADF Faces + hardware device in the client side.( adf swing or adf java fx)

We are using adf+swing in desktop app.
We like ADF Faces but we need interations with Hardware device in the client side: scan reader, web cam, bar code reader, finger prints reader …
How to do that’s in the adf faces web environment ( what about with sandbox security) how to obtain in the adf faces web page in the client side de video streams.
In the future adf will be use Java FX?
Thanks
Juan Carlos Llanes

Hi,
see sample 71 http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples
You can use ActiveX plugins or JavaApplet to access the client system. To reach out of the sandbox, it will require a certificate
In the future adf will be use Java FX?
No.

What is Client-Side API for RMI on the Java Card Platform

Similar Messages

Maybe you are looking for