What is code page
Hi all,
What is code page ? Please give a brief idea of code page,What relevance does it have with unicode
pointers would be useful,
Thanks in advance
Regards
nikhil
Unicode - TRANSLATE... TO CODE PAGE
Reward points..
Similar Messages
-
hello!
can anyone please explain what is code page?
I came across a problem, while opening dataset in text mode,
i use the command transfer few times, but instead of getting few lines in the file i get a string of all the lines.
I was told to use code page, is that the solution?
regards
yifatHi,
Code page means:
Mapping of selected characters (character set) onto bit sequences. For example, Latin1 ( ISO-8859-1) represents a code page that contains all the characters required for Western European languages, while a Unicode character representation can display all the characters required across the globe. The way in which characters are displayed in an internal session is determined by the active system code page for the text environment in the internal session. Each code page supported by SAP is assigned an SAP code page number in the database table TCP00.
Regards,
Sesh -
What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?
What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless. I am caught going round in this loop - there's that one button, no other option. Thanks in advance.
-
US English Code page - What is its correct value?
'Lo All,
Hope someone can throw some light!
We're in the process of updating Win Server 2003 servers to Win 2012. This is being done by building completely new servers in a new Development server datacentre based in Hong Kong. Our existing servers are all UK based.
I can set the server locale to US English or UK English. Using CHCP in a cmd window shows me the active page then gets set to either 437 (when US) or 850 when (UK).
However, when running MSI to install some software I get an error 1208 English is not installed. This message appears if I set the locale to US or UK. I am setting the value for dos based programs as well as the admin locale.
The MSI appears to be expecting to find code page 409 for US English and not 437. 409 is set as the default in the setup,ini file.
US English is also at the top of the list for display languages.
UK English is shown on the list but has "Language Pack not available against it.
I've been trawling through the internet, but I've just ended up getting confused!
Is this a fault with the setup process expecting to find 409, or is it an error in the way Windows Server is setting 437?
Thanks in anticipation!
(P.S. It's really irritating that there's no option to set UK English in here!)
(P.P.S be gentle - its my first time - and I've no idea what I'm talking about!)Hi,
Would you please post the error information in detail to help us to troubleshoot this issue?
In my expression, a .msi file failed to install during the installation, please check the event log and find the relevant "error" or "failed".
You can also try to install .msi with cmd msiexec, which will generate a log file for analysis:
msiexec /i "C:\MyPackage\Example.msi" /L*V "C:\log\example.log"
Best Regards,
Anna Wang -
Infopackage Idocs in status 2 - could not find code page for receiver system
Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
ChristopheHi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe -
What html code will start an EXE (program) with a click on a webpage link?
The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">
<!--
body,td,th {
color: #000;
-->
</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
<td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center"><font color="#999999">
<b>This Software Allows You To Review Neat Charts of Your Family Tree </b></font></div></td>
<td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html"><font size="2">Back</font></a></div></td>
</tr>
</table><BR><center>
<br>
<FONT color=#ff00ff><strong>Click the link below to download a special software program for your PC.</strong></FONT><br>
<br>
<a href="http://jdmcox.com/"><strong>Cox Website</strong></a><br><br>
<strong>ITEM 1</strong> (AT THIS WEBSITE) IS THE <strong>FAMILY TREE CHART</strong> PROGRAM.<br>
It is called <strong>Simple Family Tree</strong><br>
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
<td width="49%" align="left" valign="top"><FONT color=#ff00ff><strong>Click the link below to use this special software program after you download and install the program.</strong></FONT><br>
<br>
<!--<a href="C:\Program Files (x86)\Simple Family Tree\Simple Family Tree.exe"><strong>Family Tree Charts Program by Doug Cox</strong></a><br><FONT color=#ff00ff>
-->
<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe"><b>Family Tree Charts Program</b></a><br><br>
<FONT color=#ff00ff><strong>Click the "run" button for both warning messages.<br>
Click the "READ THIS!" menu option when the program opens.<br>
Click "X" in the upper right to close the program.<br><br>
You can update the family data in future years with this program too.</strong></FONT>
<br></td>
<td width="51%" align="left" valign="top"><FONT color=#ff00ff><strong>NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: </strong></FONT><br>
"c:\<u>program files (x86)</u>\simple family tree\simple family tree.exe"<br><br>
<FONT color=#ff00ff><strong>The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me.<br><br>
NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</strong></FONT></td>
</tr>
</table>
<br></center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
<tr>
<td bgcolor="#EFEFEF"> <font size="2">©2002 Sales and People</font></td>
</tr>
</table></body>
</html>Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom
<!--
body,td,th
-->
function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents.<br>Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
Re: What html code will start an EXE (program) with a click on a webpage link?
created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hello ,
I am sending file to print server and i am accounting problems with special characters
In first version of program ( please see the code below )
"OPEN DATASET g_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT."
The special characters l from German and French alphabet were NOT printed properly , and we had some nonsense results . Other '"Normal "characters like A , B... are printed without errors .
To prevent this error i wrote new line of code for open data set ( below ).
"OPEN DATASET g_filename FOR OUTPUT IN LEGACY TEXT MODE CODE PAGE '4110' IGNORING CONVERSION ERRORS."
This was working only when FTP was NOT used , when FTP was used i had following short dump.
I am working in SAP release 6.0
Please Advice
SHORT DUMP Message :
What happened?
The conversion of texts in code page '4102' to code page '4110' is not
supported here.
The current ABAP program 'SAPLZPRN_AUTO_LBL' had to be interrupted because
incorrect
data would have been created by the conversion.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CODEPAGE_CONVERTER_INIT', was
not caught in
procedure "Z_TRANSFER_FILE" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Possibly, one of the codepages '4102' or '4110' - needed for the
conversion - is unknown to the system. Another option is, that a Unicode
codepage was specified for a file in LEGACY MODE, which is not allowed.
Additional parameters for the codepage conversion (as , for example, the
replacement character) might have invalid values. You can find further
information under 'Inernal notes'.
If the problem occurred at opening, reading, or writing of a file, then
the file name was '/te/mm/labels/0488_20091208_051317_EC008119_01_001.dd'.
(Further information about this file: " X ")Hi,
Also check the character set supported by the Printer. Printer configuration should also be checked on SAP side to determine character set and code page using SPAD.
Regards,
Nishad -
Idoc failed in Bi system "Could not find code page for receiving system".
Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsiHello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal -
Code page of the receiver system could not be found".
Hi,
We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
What could be the reason for this error?
Because of this error all IDocs are getting stuck in XI.
Kindly help.
Thanks,
JohnHi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos -
How to add a new character in code page
Hi,
I need to add a new character to existing code page in the upgraded system.
The character is latin small s with caron (u0161 ).
The character ID is 000161.
What is the byte sequence of the same?
Thanks and Regards
ShraddhaUse tranaction SCP .
Under segment , take the character sequence and include your new id value . Byte sequence in my opinion will be confirmed from the client .
Br,
Vijay. -
DB Tab RFCDES: Could not determine code page
Hello,
I have a simple scenario File->XI->IDOC(orders05)
The R/3 who receive the IDOC is an 46c system. When sending a file to the XI I receive the following error message in sxmb_moni on the last step "Call Adapter"
DB Tab RFCDES: Could not determine code page with <myr3>
Does anyone have an idea whats wrong ?
Regards BerndHi Bernd,
did you have a look at SAP notes for idoc adapter code page problems? : 747322, 804570
Regards,
michal -
What HTML code do I need to get Adobe Flash to play an embedded MP4 video file (8 MB)?
Thanks
MarkHere are a couple of ways, one using the Netstream class and the other using the FLVPlayback component.
For the NetStream approach, the following in the timeline code will play/loop the intended mp4 file...
var video:Video;
var connect_nc:NetConnection = new NetConnection();
connect_nc.connect(null);
var stream_ns:NetStream = new NetStream(connect_nc);
stream_ns.client = this;
function netStatusHandler(p_evt:NetStatusEvent):void {
if (p_evt.info.code == "NetStream.Play.Stop") {
stream_ns.seek(0); // to loop the video
stream_ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
video = new Video();
addChild(video);
video.attachNetStream(stream_ns);
stream_ns.play("path_to/your.mp4");
For the FLVPlayback component, add it to the stage, give it an instance name ("fp" used below), assign your mp4 file ("path_to/your.mp4") as the source property in the Properties panel, and select the option to autoplay as well. Place the following code in the timeline...
fp.addEventListener(Event.COMPLETE, playAgain);
function playAgain(evt:Event):void {
fp.play();
To put the Flash swf file in an html page, in the Publish Settings set it to publish an swf and an html page. Publish the file an the html page will be created for you. -
"Could not determine code page" inbound side error
Guys,
We are receiving a flat text file and sending an IDoc, but now I'm getting this error.
Any idea what's wrong?
And what is that "I::000" in the message?
Any help is much appreciated.
Thanks a lot,
Viktor
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page
with TABWDV100 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not
determine code page with TABWDV100 I::000
FM LS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
PS:By the way, super sorry if this is a duplicate, my first post didn't show up,
not sure what I messed up...Hi All,
I have a similar problem, But with a small variation in the Log.
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER"><b>ATTRIBUTE_IDOC_RUNTIME</b></SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with PSRCLNT310 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
It says the "ATTRIBUTE_IDOC_RUNTIME", And I have checked all possible related threads and made my settings in synch. Did anyone had a similar problem? -
Hi guys,
well we have strange problem with code page. Scenario is IDoc2IDoc.
We receive IDoc from french-system and when IDoc comes in, we get following error:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with E01CLNT100 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
Does someone has experience with this?!
brCan somebody help me with this?! in RFC-Dest. we thought to use MDMP but with no success.
Could it be that this depends on user-permissions of the RFC-User in target system?! What permissions are needed for this?!
br -
Could not find code page for receiving system
Hi Experts,
When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
Dave
"Could not find code page for receiving system"Hi Praveen,
The detailed error msg says the following.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.
Maybe you are looking for
-
Wondering if I can get the attention of some of the mods - My iPhone, when docked and playing music, reboots on its own. I touch nothing, it is not connected to anything but my desktop speaker system and it is working itself through the playlists. Od
-
After updating to OS X 10.5.5 and installing the latest RAW file plug-ins update from Apple yesterday, I cannot update my existing Aperture vaults, I get the following error message: The following error occurred: Aperture has detected a problem with
-
'BAPI_DOCUMENT_CREATE2': store attachment using 'SAP-SYSTEM'
while i am checkin a document (attachment) using storage category KPRO ,the document is getting stored but when i use SAP-SYSTEM the Document is not getting stored. How can I get it stored using 'SAP-SYSTEM' Following is the code; DATA: lv_docnum TYP
-
Home Calendar in Outlook?
Have just upgraded my iPhone 2G to version 2.0. When I sync itunes shows two calendars in Outlook 2007. It shows "Home" and "Outlook Calendar". However, I do not have a "Home" Calendar in Outlook and the iphone has put some appointments into the Home
-
2 sided printing with hp 6800 all in one
I recently went to print my Caring Bridge blog and was amazed I had not noticed the option for 2 sided printing before. (I've have this printer at least 6 mos) I was thrilled how beautifully this worked! Problem is, the 2 sided option doesn't show an