What is collaboration pane in objetive tab of scoreboard in obiee 11g

Hi All,
CAn any one throw some light on what is the purpose of collaboration pane, and what kind of information need to be maintained in this area?
Thanks and Regards
santosh

Hello,
In a last few days catalogcrawler created several core dumps in my 11.1.1.5 OBIEE installation , on AIX. Any input would be appreciated, Can not find much on that subject on oracle support site or on the web. Also, do not see any errors reported in EM.
Regards,
VK

Similar Messages

  • What is the equivalence of @Aggregate_Aware function in BO in OBIEE 11g?

    Hi All,
    I have a requirement in my project regarding aggregration function. Actually it deals with convertion of BO Reports to OBIEE Reports. In BO Universe i have function called @Aggregate_Aware the actual syntax of this function is as below:
    @Aggregate_Aware(aggregate_table_1......aggregate_table_n)
    I need an OBIEE function thats needs to perform the above aggregation calculation. Can anybody please shed light on this issue. Its an urgent requirement.
    Thanks in Advance
    Thenmozhi

    In short, because it is one of the more complicated things about OBIEE:
    In your Business Layer, each fact can have 1 or more LTS. Each LTS has a content tab. In this tab, you can define on which level the fact joins to the joined dimensions and to which dimensions this LTS is joined. The levels are created using dimension hierarchies. These should be set for each dimension.
    Each logical column in the fact can belong to 1 or more LTS.
    Whenever you create an analysis with a measure from this fact, the OBI Server will check the objects in the queries, look in which level of the dimension hierarchy they reside and compare that to all the LTS of the fact. The best-fit result (ideally, an LTS where the objects used are the lowest level for that dimension) will be used to build the physical query. This way, setting the levels in the LTS give you the ability to control which LTS is used in which scenario.
    I am sure you will find plenty of information on this on the web, but it is too large a subject and too complicated to go into in detail here...

  • HT4623 What happened to the itunes radio tab? It was there yesterday and this morning Genius has replaced it's position.

    What happened to the itunes radio tab? It was working yesterday and this morning it has disappeared.

    JimHdk wrote:
    The bookshelf is history. Skeuomorphism is dead.
    Thank the stars! I'd really had enough of it.

  • What is the use of Module  tab in Communication Channel  ?

    Hi Expertes
    can any body tell me the that
    What is the use of Module  tab in Communication Channel  ?
    How we can use in the senarios?
    Mainly What are the Situvation we can use this tab ?
    Thank you
    G,Praveen Kumar

    hi rajesh
    Thank You For Fast Responce
    Error  :
    Exception caught by adapter framework: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
    Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified : com.sap.aii.af.service.util.configuration.ConfigurationExceptionSet: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
    Can you Help me torectifiy the error .

  • What is the use of MiniApps Tab In PFCG?

    Hi Friends,
    can any one tell me what is the use of miniapps tab in PFCG.
    thankx in advance....
    regards,
    kanthi reddy

    Hi,
    Sorry, but I don't think this is the right forum for miniapp issue.
    anyway, how about:
    http://help.sap.com/saphelp_47x200/helpdata/en/75/faf91a150f11d4964f00a0c94260a5/frameset.htm
    cheers,
    Vincent

  • What is the use of confirmation tab in Purchase order ?

    what is the use of confirmation tab in Purchase order?

    Hello Balaji
    In Purchasing, the term Confirmation is an umbrella term for various kinds of information provided by a vendor to a customer with regard to ordered goods.
    Possible types of confirmation include the following:
    Order acknowledgments
    Loading or transport confirmations
    Shipping notifications. (Note that shipping notifications may also be referred to by a number of other names, including "advice (note)", "advice of dispatch", "ship notice", and "advance(d) shipping notice" ("ASN").)
    A further form of confirmation frequently used in Purchasing is the Inbound Delivery, which is created on the basis of an incoming shipping notification. The shipping notification represents a vendor’s confirmation to a purchasing organization of a delivery date for a certain quantity of ordered materials (or the date of performance of ordered services).
    You can enter incoming vendor confirmations manually. Alternatively, you can receive them via EDI and have them processed automatically.
    When working with vendor confirmations, you have the following options:
    You can enter the order acknowledgment number if you simply wish to provide a basis for monitoring the receipt or non-receipt of acknowledgments.
    You should enter the confirmed quantities and delivery dates if you wish to provide more detailed information in support of the purchasing, inventory management, and materials planning/control functions within your enterprise.
    Regards

  • What is the use of personalization tab in user creation?

    what is the use of personalization tab in user creation

    Hello Kumar,
    Check these links for this
    http://help.sap.com/saphelp_nw04s/helpdata/en/07/5430fbdb39fb4d9abb56754e039d0d/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/ab/e70538389511d5974400a0c930dcc1/content.htm
    Award points if helpful,
    Regards,
    Raju.

  • I have 5.0 What happened to right-click a tab and the Save as bookmark option?

    I have 5.0 What happened to right-click a tab and the Save as bookmark option?

    "Bookmark This Page" can be accessed via the right-click context menu of that browser page or via "(Firefox) > Bookmarks > Bookmark This Page".
    *https://support.mozilla.com/kb/how-do-i-use-bookmarks

  • What is the use of Schedule Tab in Oracle BI Publisher

    I am learning oracle bi publisher, here in the BI Publisher Enterprise screen , i got 3 tabs , 1) Reports 2) Schedules 3) Admin, here my Schedule tab is disabled..
    What is the use of Schedule Tab ?
    Edited by: joysaha123 on Mar 19, 2010 8:45 PM

    Dont you think, this has to be posted in BI Publisher forum ?
    If you had, this will get more visibility.
    Neway, let me answer.
    The reports can be scheduled for later, which can be monitored(download previously run report/re-run).

  • What is the role of Changing Tab infunction module se37

    Hi. All,
    Any body can help me that what is the role of changing tab in function module.
    i am very confuse to take this. please tell me with code ( code implementation)
    not only theritical.
    Regards
    Mohd
    Moderator message: please search for information, these forums are no substitute for ABAP training.
    Edited by: Thomas Zloch on Mar 1, 2012

    SAP help portal
    ht[http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351ee6448c11d189420000e829fbbd/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351ee6448c11d189420000e829fbbd/frameset.htm]
    Configuration for definition of formula parameter
    Customizing > Quality Management > Quality Inspection > Results Recording > Define Parameters for Calculated Characteristics
    As you know, you can assign the formula for inspection characteristic in inspection plan.
    Regards
    Luke

  • What is the importance of the tabs like vendor and customer in t.code md04

    Hi All,
    what is the importance of the tabs like vendor and customer in t.code md04? Could you please explain me...
    Thanks
    Krish

    Hi Krish,
    In MD04,you see requirement of material.
    Whenever there is Purchase order & Sales order created,you will find relevent Vendor & Customer name respectively when you go for Vendor & Customer tab. When you double click on Vendor It shows you details of Vendor.
    Just try & Check it.
    Hope this help you.
    Regards,
    Raja.
    Edited by: Raja on May 7, 2009 6:13 AM

  • OBIEE 11g Analysis : Change Report edit link to go Criteria tab instead

    How to change the setting to have the "Edit" to go to criteria tab instead of Results (Compond view)?
    Many time we may need to change the filter from default setting and then run the report or if the filter is setup to be used from a dashboard (using "Prompted") option...then the report attmpts to run the report without values...
    And I have not checked to see if the server cancels the query to the database when the user navigates to the Critetia Page as there is no cancel link...(as it displayed in 10g...)
    FYI, We have just started using OBIEE 11g in a dev environment, we are in the process of configuring the new env to get ready for prod...
    Thanks
    Sundar

    Hi,
    By default, the Action request is sent to results tab. You can modify it by editing the dashboardeditor.js file found in /app/res/b_mozilla/dashboards folder.
    Steps:
    1) Open dashboardeditor.js file.
    2) Search for the function "DUIModifyReport".
    3) Inside the function you will find that ***"&Action=results&Path="****
    4) Change results to criteria. In other words, the changed code will look like
    ****"&Action=criteria&Path="*****
    5) Re-deploy the code and bounce the services.
    -- Remember, this will affect for entire dashboard, and for all users. ---
    If you want to avoid step (5), then manually copy the changed dashboardeditor.js to /user_projects/domains/BIfoundation/servers/bi_server1/tmp/_WL_user/analytics_11.1.1/$RANDOMFOLDERNAME$/war/res/b_mozilla/dashboards and bounce the services.
    Voila - now when you edit the analysis through dashboard, it will take you to the criteria tab, instead of results tab.
    Please award points, if it helps.
    Regards,
    Bharath

  • OBIEE 11G - Navigation:How to open in New page/new tab.

    Hi All,
    When I click on a link in report it opens another report on the same page. Instead I have to open the report in a new page/new tab. Is this feature available in obiee 11g version? If yes, could you please tell me how to make it possible?
    Thanks in advance,
    Sunita

    hi
    Use Action Link...to open link in New Window
    1.Go to edit Dashboard...
    2.Select Action Link from Dashboard Objects.
    3.Click the Action Link Properties and Type your Report Name in Link Text Box.
    4.Select New Action Button and Go to Navigate to BI Content
    5.Choose your Report from your path and click ok button
    6.Enable Open Link in New Window(IMP) and click ok.
    7.save and check your dashboard page...
    thanks,
    kavi
    Edited by: Kavitha on Jul 12, 2011 12:11 PM
    Edited by: Kavitha on Jul 12, 2011 12:12 PM

  • What's wrong in OBIEE 11g

    Everyone is saying how good OBIEE 11g is so I decided to post about what's bad with it, which surprisingly it's lot. This is what I think is wrong with OBIEE 11g:
    1) Can't install the client tools only, it requires a full install. It seems they have simplified the installation in 11g but only for developers/sales reps running everything on the same machine on Windows PC. The Client tools even requires new set of schema, nonsense!
    2) The "super" new installer that allegedly does everything and simplifies your life does not create the time dimension tables for the Usage Tracking reports.
    3) BI Publisher still uses a separate Scheduler. Half-baked integration still there...
    4) OEM introduced functionality to configure things from the web but again half-baked integration there, a lot of config parameters still need done directly on config files. If you are going to change this better to change all at one go rather than confusing people with half-done things.
    5) Installer requires new schemas to be created in advance. Can't deffer that, can't use an existing schema. This is good for developers running everything on the same machine. Rubbish for enterprises where BI developers are usually not DBAs.
    6) Oracle installer now requires a myriad of permissions and packages on Unix to install (i.e. write permissions on /opt/app/oracle). 10g installer was much better and didn't need all that crap.
    7) 64 bits OSes only support "Software only" installs, need to be configured manually. WTF? The whole enterprise world is already on 64bits! Nonsense!
    8) Still no support for client tools in 64bits OSes.
    9) IE6 no longer supported. May be it was unavoidable but most of the enterprise is still in IE6.
    10) No choice of J2EE. I don't see the need to force people out of the their choice of J2EE other than pure anti-competitive behaviour.
    11) License costs up 130%.
    IMHO the above is a big step back, Oracle is missing the point here. Obviously not enough competition on the BI market, Oracle's got too big and too greedy.

    Here is an interview with Kurt Wolff, which is one of the original OBIEE developers from the nQuire days:
    http://obibb.wordpress.com/2010/08/23/obibb-%E2%80%93-interviews-kurt-wolff/
    This is particularly relevant of how I feel about OBIEE 11g so far...
    "I don’t really know if there are any new features that are important to me in my current work or not. There may be features that help Oracle sell more product, but that’s different.
    Over two years ago I submitted a list of 20 “little” enhancements that, as someone who on a daily basis worked developing analytic apps with OBIEE, I thought would be really beneficial. They were “little” in the sense that I thought the dev team could knock them all out in less than three weeks’ time. Seriously big impact with seriously little work.
    Instead, we’re getting what appears to be a major re-write of the product, which raises questions in my mind about compatibility, unlearning, and new bugs. What I know about new features – well, they’re not so compelling. Sure, if you have a need to integrate Essbase with your other data, that’s good. But in my present situation, it’s irrelevant, and I’m planning on taking a lot of time to evaluate the new release before moving ahead with it."

  • Freeze panes in OBIEE 11g

    Hi All,
    Glad to post regarding Freezing panes in OBIEE 11g.
    Since this has got most hits in the search.
    I searched a quite few websites like replies from BI Joe and few others. But couldnt resolve this.
    Would be great help for all those who are looking for workaround regarding the same.
    Also - another feature likely in 11.1.1.6 - freeze panes for rows and columns :-). But need it in 11.1.5
    Regards
    MuRam
    http://obiee10grevisited.blogspot.in/
    Edited by: MuRam on Feb 29, 2012 10:23 AM

    check with oracle support. they might released patches for 11.1.5

Maybe you are looking for