What is Condition formula/call type/routines for ECS and SECess

HI
what is Condition formula/call type/routines for ECS and SECess (SECONDARY HIGHER EDU CESS) to assign pricing procedure
JFACT.

ECS reqt is 10 and a/c key os2
SECess reqt is 10 adn a/c key os3

Similar Messages

  • Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video childrens events. It must have gear type adjustments for verticle and horitontal ajustments due to weight of ipad

    Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video children's events. It must have gear type adjustments for vertical and horizontal adjustments due to weight of ipad

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • What photo album software do you recommend for CS4 and/or CS5?

    I want to do pagination, design and layout in CS4 (multiple photos per page, text, etc.) to create printable albums. These albums could be either social event or documentary purposed.
    Many such photo album software programs are proprietary which obliges you to use a specific printer or lab. Are there stand alone photo album software programs out there, CS4/5 which allow you to create photo albums and then print your own albums or use a vender of choice to print your albums?
    I've seen everything from $29 thru $400, and some which are priced beyond $800.
    What is your favorite photo album software for CS4 and/or CS5?
    Thanks for any help you may provide.

    It sounds like you are trying to create scrapbook pages ... if so then its quite easy just to create them yourself using Photoshop. You can purchase scrapbooking kits which will give you all the background papers and elements that you need to add to your page. There are also many free kits around ... a quick google search will show you lots of them
    Sets of the pages can then be uploaded to sites that will print out a book ...
    Wendy

  • TypeError : unsupported operand type(s) for + : 'NoneType' and 'str' - UCM

    Hi All,
    I got below error while creating weblogic domain in UCM.
    Successfully installed Oracle,RCU and weblogic while creating domain i got error, Please any one know how to create domain. Let me know.
    Error :::
    Domain Creation Failed!
    Domatin Location :
    C:\Oracle\Middleware\user_projects\domains\base_domain
    Reasion : null
    Exception:
    Traceback ( innermost last):
    File "<iostream>", line 17, in?
    TypeError : unsupported operand type(s) for + : 'NoneType' and 'str'
    Version : Orcle ECM version 11.1.1.3
    weblgoic server 10.3 windows 7 (32bit)
    oracle 11g
    --------------------------------------------------------------------------------------------------------------------------------------------

    Are you sure that you're using the correct config.bat or config.sh? There are multiple and it's very easy to mistakenly use the incorrect one if you're not paying very close attention.
    If you're sure you're using the correct config script, then make sure that you execute the commEnv.bat or commEnv.sh and setWLSEnv.bat or setWLSEnv.sh before running the config script. These files will set some variables that the script will be looking for.
    Let us know if that helps!
    Thanks,
    -ryan
    Ryan Sullivan | ECMconsultant
    http://www.ecmconsultant.net/

  • BED,ECS and SECess value not defaulted in J1IS for return purchase order.

    1)I have created return purchase orde for an excisable material.
    2) In the purchase order i am able to view the BED,ECS and SEcess values.
    3) I have created MIGO, for the return purchase order with excise as part 1 only.
    4) While doing J1is or the 161 material document number, the BED, ECS and SEcess values are not defaulted.
    Kindly help me to solve this issue.
    Regards,
    jayakumar

    Hi,
    Check the settings in
    Tax on Goods Movements  --> India --> Account Determination
    Specify Excise Accounts per Excise Transaction - Check for ETT OTHR
    OTHR          CR Credit     PLAAED PLA AED account
    OTHR          CR Credit     PLABED PLA BED account
    OTHR          CR Credit     PLAECS PLA ECS Account
    OTHR          CR Credit     PLASED PLA SED account
    OTHR          CR Credit     RG23AED RG 23 AED account
    OTHR          CR Credit     RG23AT1 RG 23 AT1 Account
    OTHR          CR Credit     RG23BED RG 23 BED account
    OTHR          CR Credit     RG23ECS RG 23 ECS Account
    OTHR          DR Debit     MSUSP CENVAT suspense account
    also check for Specify G/L Accounts per Excise Transaction
    Regards,
    Vikas Mayekar

  • What is the right Call Back url for twitter OAuth in BlackBerry eclipse plugin 9550 simulator

    Hi friendz
    Being optimistic to get the proper help regarding the "Call Back" Url for twitter, I'm here. Actually I'm implementing 
    "TwitterAPIME-RIM-OAuthSample" for twitter. Here I am feeling helpless when callback url has been asked.
    I read somewhere that call back url is not required for java me. But here after putting my credentials in web view, I can't return back to my app as I'm passing "" in callback url param(as I think).
    How to handle this thing... please suggest me??

    CallBack URL is the url where the twitter redirects after successful authentication. The callback url can be a webpage that builds in any web tech like php etc. for the application. Then the mobile app moves to that redirected page after successful authentication. We can set www.google.com as Callback Url. In that case we need to check the url in the onPageStarted method of the WebViewClient as to finish the webview otherwise it redirects it to www.google.com.
    if (uri != null && uri.toString().startsWith(TwitterConnector.CALLBAC​K_URL)) {
     finish();

  • What's the deal with 7:22 For iCal and iPhoto

    Ok, so I'm having this problem where on every single saved picture or document the "Get Info" tab shows it as being created at either 7:22 AM or 7:22 PM. Also, all of my events on iCal show up automatically as happening at 7:22 when I select the "Show Time in Month View" option under Preferences. Any ideas?..

    Sure. Once you open Terminal, you will be presented with a shell prompt. The "shell" is what's running inside the terminal, and is what processes the commands you type in. Common shells are sh, bash, zsh, csh, tcsh. You are probably running bash by default. For you, it really doesn't matter what shell you are running.
    Your prompt will probably look similar to this:
    <machine name>:~ <username>$
    where <machine name> is the name of your machine, and <username> is the name you logged into your system with. So for me, this looks like:
    tomservo:~ glsmith$
    So, at this prompt, I wanted you to type:
    cp gradparty.jpeg ~/Desktop/testpic.jpeg
    The "cp" is a program that copies files. That invocation says "copy file gradparty.jpeg to a new location located in the user's home folder, in the sub-folder called Desktop, and rename it to testpic.jpeg". Note that I used a shortcut -- in Unix, the "~" stands for the home directory (aka folder) of the user issuing the command. It's a quick way to get rooted to your home folder without having to type the full path.
    Another thing to note is that the above command assumes that you are in the folder that contains the file "gradparty.jpeg". To get there from the Terminal, you will have to use the "cd" command. For example, let's say I have this image in a sub-folder called Graduation inside my Pictures folder. From the Terminal, I could get there by typing:
    tomservo:~ glsmith$ cd Pictures/Graduation
    and I could verify that the image is there by then typing:
    tomservo:~ glsmith$ ls -l gradparty.jpeg
    "ls" is what lists files in a directory (similar to "dir" in Windows).
    So, once you've done the copy, you will have a new file sitting on your Desktop. This is what I want you to look at in the Finder to see if the times are still messed up.

  • ABAP Routine for Deleting and creating index for ODS in Process chains

    Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

    Hi Sachin,
    find the following ABAP code to delete ODS ondex.
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    To create index:
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    hope it helps....
    regards,
    Raju

  • What is the difference in createdelete indexes for  infocube and DTP ?

    Hi experts,
    Can anyone  tell me what is the difference in create\delete index process for infocube and create\delete index for  DTP or Infopackage? If i add into a chain an Infopackage then DTP  then Delete request processes,   system generates for all of them delete\create index processes  by default. Is that nesesary  leave them all or is that enough to leave only the ones for infocube?
    Thank you,
    Tigr_Z

    Hi Tigr,
    This delete/create index step is to make the load faster. This can be done on a infocube. Before loading data to infocube it is suggested by SAP to delete index and after loading again create the index.
    If you want to execute these steps through process chain, there are process types for delete/create index. It is related to infocube not to any DTP/Infopackage. Before loading to the cube add one DROPINDEX step (deleting) in the chain. After completion of loading add one INDEXING step (creating) in the chain.
    Thanks,
    Indrashis

  • Need tuxedo8.1 license of type SDK (for windows and linux)

    CMDTUX_CAT:4382: ERROR: You do not have a valid SDK license
    I get this error when running this command -buildserver.
    I downloaded the entire 8.1 package and found that it had a license of type RTK
    I want a License of type SDK with JOLT.
    If anyone has one, please do send me.
    I need SDK license for 8.1 and/or 9.1 (windows and/or linux).
    If anyone has a license of SDK type, please send me. My mail ID: [email protected]
    Also, how do we update the license in window?
    thanks in advance,
    Anish Kumar

    Hi Anish,
    Assuming you are covered by the appropriate licenses, you may download license keys for Tuxedo and related products here . Append the license key files you require into a single file called lic.txt and place it in the udataobj directory of the Tuxedo installation.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • What is the safe music listening level for regular and in-ear headphones?

    I am wondering what the safe music listening level for regular and in-ear headphones is. I heard it was 50% volume for regular headphones but what about the new 60$ in-ear ones? I am going to get them soon.

    Just turn it up enough for you to enjoy the music. Even prolonged low volume sound can have long term negative effects on your hearing. It also depends on your listening environment. In a dead silent room you won't need very much volume. I have my cranked pretty high on when riding my motorcycle to work.  Just don't take your hearing for granted. Constant ringing in your ears will suck.

  • How to create new Wage type specifically for IT14 and IT15 only

    Hi Gurus,
    I was assigned to create a new wage type to be used for Infotypes 14 and 15 only.
    Another thing is to have this for % deduction rather than having a fixed amount ($).
    Appreciate all your help.
    thanks!

    FOR IT0014
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CREATE WAGE TYPE CATALOG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >Check wage type group 'Recurring Payments and Deductions
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Define Wage Type Permissibility for each PS and ESG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > RECURRING PAYMENTS AND DEDUCTIONS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Check wage type characteristics
    FOR IT0015
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CREATE WAGE TYPE CATALOG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >Check wage type group ADDITIONAL PAYMENTS
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >CHECK ENTRY PERMISSIBILITY PER INFOTYPE
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Define Wage Type Permissibility for each PS and ESG
    PM - - - -  > PA- - - -  >PAYROLL DATA- - - -  > ADDITIONAL PAYMENTS- - - -  >WAGE TYPES- - - -  >CHECK WAGE TYPE CATALOG- - - -  >Check wage type characteristics
    Last step of the both set you ( V_T511) have to define the indirect valuation method ( PRZNT, SUMME Etc)
    Don't forget to maintain V_T539J, the place where you defining your component is a percentage of another component

  • I have so called photo subscription for lightroom and photoshop. How can I get new version of lightroom?

    I have a 9.99 subscription for lightroom and photoshop. I only use lightroom and would like to try new version 6, which I think I should be eligible under subscription plan. I can't figure out how to upgrade my existing copy. Creative Cloud doesn't offer this option.

    Hi Zeljko Dakic,
    Kindly try the below mentioned link.
    Digital photography software | Download free Adobe Photoshop Lightroom CC trial
    If you are not able to see Lightroom try out the below mentioned steps.
    https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    https://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
    Thanks,
    Atul Saini

  • What are the PSE 8 default locations for photos and catalog files in Windows 7?

    I can only find this information in the Knowlege Base for XP and Vista.
    Thanks for help

    The default locations for catalog folders on Wndows 7 is the same as on Vista:
    http://kb2.adobe.com/cps/515/cpsid_51536.html
    To find out where the current catalog folder is located, do Help > System Info.
    The default locations for photos are under My Pictures on Windows 7, as compared to Pictures on Vista.

  • What is the procedure to type my own titles and subtitles in my videos?

    What is the procedure to be able to type titles and subtitles in my videos?

    dwk141
    I have written several blog posts on the Premiere Elements Titler. See if any of them addresses your title needs. But all the titles are within the video, not outside the video, from static titles to crawling newsroom type text at the bottom of the video frame. None of the following demos the crawling titles, put the demo'd principles of the Titler may be of help in navigating through the Titler. Premiere Elements 11 and 12 have the same Titler.
    http://atr935.blogspot.com/2013/07/pe-titler-part-1-text-animations.html
    http://atr935.blogspot.com/2013/07/pe-titler-part-2-styles.html
    http://atr935.blogspot.com/2013/08/pe11-titler-shapes-for-highlighting.html
    Although most of the time Adobe demo's its features in the Quick workspace, I prefer the Expert workspace since you can see better what you are doing and thus have more control of the situation.
    After you review all the details for what you are about to do, in mini test runs, explore and experiment before the grand project(s). If you reach an impasse on any technique, please do not hesitate to ask for clarification here. We are all eager for you to succeed.
    Looking forward to your progress.
    Thanks.
    ATR

Maybe you are looking for