What is connection reset by peer during osx update?
during mac osx lion update "connection reset by peer" error and update fail
I'm facing exactly the same issue.
Was there any solution to the described problem?
Similar Messages
-
I have been trying for weeks to download update 10.7.5 and cannot do so. I do get a message at the end - "connection reset by peer". Can anyone shed any light on why I cannot download this update and what the message may mean? Thanks.
Take a look at this discussion and the ones listed under "more like this" in the right column:
https://discussions.apple.com/thread/4166820?start=0&tstart=0 -
When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.
Try here:
http://support.apple.com/kb/DL1524 -
Connection reset by peer when trying to update to OSX server 3.01 on 10.9
connection reset by peer when trying to update to OSX server 3.01 on 10.9. PLease help
Assuming your network is working for other activities, and it's just the Mac App Store that's failing...
Try restarting the download within the Mac App Store.
Failing that, restart Mac App Store and try restarting the download again.
Then failing all that, I'd close Mac App Store, reboot the system, and open and try the Mac App Store download again.
Here are some details on the Mac App Store (including how to cancel and restart downloads), and here are the App Store Troubleshooting suggestions from Apple. -
What does it mean connection reset by peer
What does it mean when the message "connection reset by peer" comes up when I try to download the system updates?
Hello, it means something timed out waiting for a good reply, see this for a bit of explanation...
http://kb.realvnc.com/questions/75/I%27m+receiving+the+error+%22Connection+reset +by+peer+%2810054%29%22.+
Are you using Software Update, or trying directly like...
http://support.apple.com/kb/DL1524 -
Connection reset by peer when I specify port for Callback
I have a successful rmi callback when it uses annoymous port by using UnicastRemoteObject.exportObject(this) from client. But I get the following messages when I tried to specify port by using UnicastRemoteObject.exportObject(this, port) by client. My understanding is this tells the server to callback using the port specify and the connection should be made. Where it fails is when the server tries to call client.notify() where the callback is taking place I get the errors.
Am I missing something? I thought that was all I needed to do to specify a port.
Remote Exception:java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.MarshalException: Error marshaling transport header; nested exception is:
java.net.SocketException: Connection reset by peer: Connection reset by peer
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.MarshalException: Error marshaling transport header; nested exception is:
java.net.SocketException: Connection reset by peer: Connection reset by peer
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
Thanks for the help.Hi Esmond, My name is Lee and I work with Joon (hellscream) and this RMI callback problem still persists. We appreciate your help and we know about your expertise in this area. (Great products on your web site by the way).
The problem environment currently consists of a Unix Solaris server on the backend and windows XP laptops acting as clients. The callback is from the unix server back to the client.
By looking at the output of netstat -na on the unix server during a normal anonymous port run, we can clearly see that there seem to be 3 sequentially numbered ports involved whenever the anonymous port construct of UnicastRemoteObject is used. This happens with super() or super(0); in our client code. All works very well that way.
The problem arises when we make changes to the client impl file and specify a port with super(65000) for example.
There is no firwall involved right now and UnicastRemoteObject doesn't seem to behave as advertised in the sense that
We can clearly see what's going on with the network using Thread.sleep(10000) within the client app meanwhile executing netstat -na on the unix server and grepping for the client IP address
We can see that the unix server STILL wants to talk to the client on an arbitrary port while the laptop client is listening on the desired port that we chose (65000) in this case.
If we attempt to instantiate a port in the server Impl java file, the results are the same with the exception of the choice of the source port on the unix server. We seem to be able to choose and set that at will. Unfortunately, and from the perspective of a future firewall, the source port is irrelevant and the rules normally apply to destination ports in an outgoing connection.
Anyway, with ports instantiated and everything compiling, the client prints the following stacktrace
Thanks very much in advance for your help
Remote Exception:java.rmi.ServerException: RemoteException occurred in server th
read; nested exception is:
java.rmi.ConnectIOException: error during JRMP connection establishment;
nested exception is:
java.net.SocketException: Connection reset
java.rmi.ServerException: RemoteException occurred in server thread; nested exce
ption is:
java.rmi.ConnectIOException: error during JRMP connection establishment;
nested exception is:
java.net.SocketException: Connection reset
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:292)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:4
60)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport
.java:701)
at java.lang.Thread.run(Thread.java:534)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Stream
RemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:
223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:133)
at ids.rmi.ServerJobImpl_Stub.execute(Unknown Source)
at ids.jobExec.JobThread.run(JobRunner.java:551)
Caused by: java.rmi.ConnectIOException: error during JRMP connection establishme
nt; nested exception is:
java.net.SocketException: Connection reset
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:274
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:101)
at ids.rmi.JobClientImpl_Stub.message(Unknown Source)
at ids.rmi.ServerJobImpl.execute(ServerJobImpl.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:4
60)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport
.java:701)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at java.io.DataInputStream.readByte(DataInputStream.java:331)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:215
... 15 more
Job finished. Exit status: -1 -
Hi,
I am trying to fetch report using bing API and making a SOAP call for fetching the data. I get the following error:
[Warning] fopen(): SSL: Connection reset by peer [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(): Failed to enable crypto [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=rzr63XFt5qJduddohoIRyOYAP%2f1%2ftsnhk8L%2bzBmUpdU2CQlcUB98RpY%2bbOaLFFGMqAC4IUUadC%2fNdNnJqeVCY%2f%2bpy6noVsVA%2fMJp47a3Xb1VjABfKhcdKy6vqpgEdcQg%2fQZ7QcEpZ3bEloJjUtGpDquFk53BnkeHEPVWZkDYcsQegRz%2fpG4t4w6gKCCRmhArd6osr6ZU9CMJ3lbxtGXjcQEMPvP2apNyr9P%2fc8niyfWA2aBcm1aEmOLX2KL3aRJ4rz9N7gG7uBslVZH%2b4rUjHdB7CMkbb%2fHyHwvPTqGPbPCHnicefr%2b%2fDP70hlkBEGfyOOswK67%2bl1zh7CyIv%2bcMlaDsuDX1HeFf4uORfD41H1z7):
failed to open stream: operation failed [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
Whenever I execute my script. Can you please let me know what we can do to solve this issue. The version of PHP we are using is 5.3.3 with open ssl.Hi Shobha,
I can't confirm what version of PHP you are using, but to err on the side of caution please use the version specified in the sample/SDK:
PHP 5.4.14 has been installed from PHP.
Here is our code examples:
https://msdn.microsoft.com/en-US/library/bing-ads-overview-getting-started-php-with-web-services.aspx
Thanks,
Itai -
JCO - Connection reset by peer - after 5 minute timeout
Hello
We're using SUP with the JCO Connector. This has been working flawlessly since project inception. Now, after switching to a new data center (Windows Server 2008 Server Enterprise Edition, SP2 on VMWare) we're observing a mysterious behavior with timeouts of idle connections. I hope someone in this forum knows what this might be.
JCO connections originate from SUP servers. When such connections are idle for more than 5 minutes they get disconnected from SAP -- this is in agreement with SAP timeout parameter of 300 seconds.
On our new systems we noticed that requests sent 5min+ (after timeout) show following error:
Thread-8 [22:08:55:343]: [JNI-LAYER] RFC.nativeExecute() before RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeExecute() after RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88) = RFC_SYS_EXCEPTION
Thread-8 [22:08:55:344]: [JAV-LAYER] JCO.Client.execute (Z_U_ONEMOBILE_SWO_SEARCH) threw a NON-ABAP exception: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: CPIC-CALL: 'CMRCV : rc=20
ERROR connection to partner '---removed!---:3299'
broken
TIME Fri Feb 11 18:08:55 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -6
MODULE nixxi.cpp
LINE 4448
DETAIL NiIWrite: P=161.88.23.170:3299; L=0.0.0.0:49730
SYSTEM CALL WSASend
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() enter, [SUCCESS]
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() before RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() after RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() with rc = RFC_OK leave, [SUCCESS]
Our suspicion is that the JCO client doesn't notice the fact that it gets disconnected. We used Network Monitor 3.4 to look at network traffic. Indeed, after 5 minutes the client gets a single frame (with reset flag) and no acknowledgement goes back.
What could this be?
We use
JCO 2.1.8 AMD 64-bit (contains librfc 6.40) and
JCO 2.1.9 AMD 64-bit (contains librfc 6.40) but replaced this with librfc 7.10 (after seeing Note 825494). Behavior was exactly the same. We did confirm in jco/rfc trace that those versions were actually used.
Any ideas?
Thanks and regards
Edited by: B. Gottipati on Feb 14, 2011 9:17 PMHello
We're using SUP with the JCO Connector. This has been working flawlessly since project inception. Now, after switching to a new data center (Windows Server 2008 Server Enterprise Edition, SP2 on VMWare) we're observing a mysterious behavior with timeouts of idle connections. I hope someone in this forum knows what this might be.
JCO connections originate from SUP servers. When such connections are idle for more than 5 minutes they get disconnected from SAP -- this is in agreement with SAP timeout parameter of 300 seconds.
On our new systems we noticed that requests sent 5min+ (after timeout) show following error:
Thread-8 [22:08:55:343]: [JNI-LAYER] RFC.nativeExecute() before RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeExecute() after RfcCallReceive(2,"Z_U_ONEMOBILE_SWO_SEARCH",0000000010CDC850,0000000000000000,0000000010C81530,000000000C79CA88) = RFC_SYS_EXCEPTION
Thread-8 [22:08:55:344]: [JAV-LAYER] JCO.Client.execute (Z_U_ONEMOBILE_SWO_SEARCH) threw a NON-ABAP exception: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: CPIC-CALL: 'CMRCV : rc=20
ERROR connection to partner '---removed!---:3299'
broken
TIME Fri Feb 11 18:08:55 201
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -6
MODULE nixxi.cpp
LINE 4448
DETAIL NiIWrite: P=161.88.23.170:3299; L=0.0.0.0:49730
SYSTEM CALL WSASend
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() enter, [SUCCESS]
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() before RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() after RfcClose(2)
Thread-8 [22:08:55:344]: [JNI-LAYER] RFC.nativeDisconnect() with rc = RFC_OK leave, [SUCCESS]
Our suspicion is that the JCO client doesn't notice the fact that it gets disconnected. We used Network Monitor 3.4 to look at network traffic. Indeed, after 5 minutes the client gets a single frame (with reset flag) and no acknowledgement goes back.
What could this be?
We use
JCO 2.1.8 AMD 64-bit (contains librfc 6.40) and
JCO 2.1.9 AMD 64-bit (contains librfc 6.40) but replaced this with librfc 7.10 (after seeing Note 825494). Behavior was exactly the same. We did confirm in jco/rfc trace that those versions were actually used.
Any ideas?
Thanks and regards
Edited by: B. Gottipati on Feb 14, 2011 9:17 PM -
When I try to connect to Itunes Store on my iphone, I get a message back saying "Cannot connect to Itunes Store. Connection reset by peer. How can I resolve this?
Hi Roen,
Maybe I'm pointing you into the wrong direction, on forehand my apologies for that.
What I need you should check: Ironport has a limit on the number of concurrent TLS session. Your problem might occur when this limit is reached and an additional host tries to setup a TLS connection.
(Not sure, just a shot in the dark)
Good luck with this problem,
Best Regards,
Steven -
JDBC Connection reset by peer: JVM_recv in socket input stream read
Hey Guys,
Has anyone seen this issue? We get this error in our Weblogic app logs at times and no one is able to login to our application. Our database server and SQL server seem fine at a high level. Any ideas what is causing this?
com.s1.arch.persistence.exception.PersistenceException weblogic.jdbc.mssqlserver4.TdsException: I/O exception while talking to the server, java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read
Thanksplease make sure that there is no Firewall between your servers and DB server. this message usually happen when there is a fire wall between the servers. if yes please make sure that the connection time on fire wall is longer than the time needed to complete an operation another thing that you need to check if you have a fire wall which is to make sure that Oracle DBMS return the request to the same port that it is listening to (1521 default).
-
Connection reset by peer problem
I have the following code, and every time I run it i get a "java.net.SocketException: Connection reset by peer: socket write error" exception. Why is that? This is the first time I'm writing a network client application, so please help :)
Socket s = new Socket("127.0.0.1",8080);
OutputStream out = new BufferedOutputStream(s.getOutputStream());
InputStream in = new BufferedInputStream(s.getInputStream());
out.write("server status\r\n".getBytes());
//out.flush();
StringBuffer responseLine = new StringBuffer();
int c;
while(in.available() > 0) {
c = in.read();
responseLine.append((char)c);
//out.close();
//in.close();
//s.close();
System.out.println(responseLine.toString());P.S. It's the same problem with or wothout the out.flush(), and with or wothout closing my streams and socket.InputStream = new BufferedReader
Um..just look at that code, oh boy.
InputStream is a class and so is
BufferedReader
Two different classes (event if they are subclasses)
cant be directly assigned to each other.The human eye sometimes sees what it wants to see and not what it is... :-)
I think the problem is with the protocol and the timing. The while loop may never execute due to timing:
1. Client's "server status" request takes a few ms to arrive in the server.
2. In the meanwhile, in.available is zero and the client does not enter the loop and does not append any characters to the string buffer.
3. Server writes its status on the socket which arrives at the client which is no longer reading it a few ms later.
Which brings us to the protocol:
If the server status is a fixed length block of data, try reading it into a single byte buffer.
If it is variable length or text, use a BufferedReader on the socket, read the response a line at a time and make the server end the report with a token (like a last line of "END_OF_SERVER_STATUS_REPORT" or "01234567890123456789012345678901234567890123456789", whatever).
Don't check if data is available on a socket if you know it should be, sooner or later, and you don't want to multiplex your flow on data availability. -
Io exception: Connection reset by peer: JVM_recv in socket input stream read
We are developing a new J2EE app using JDev, OC4J, servlets, and EJBs. We have determined that our firewall is closing database connections that have been idle for 1 hour. This is a security requirement that cannot be changed. When we try to use these idle connections in both stateless and entity beans, we consistently receive this or a similar error message:
"ServletSACategoryList: Error invoking EJB procedure. Exception: java.sql.SQLException: StatelessSysAdminBean::getCategoryList - Io exception: Connection reset by peer: JVM_recv in socket input stream read "
Environment:
Oracle 9iAS 9.0.2.0.0
Database: Oracle 8.1.7
JDBC 8.1.7
JDK 1.3
JDev 9.0.2.829
We are using the ejb-location attribute within data-sources.xml for JNDI lookup of the DataSource. Here is what this file looks like:
<data-sources>
<data-source
class="oracle.jdbc.pool.OracleDataSource"
name="jdbc/OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OraclePoolDS"
url="jdbc:oracle:thin:@###.###.#.###:1521:dev1"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="????????"
password="????????"
max-connections="4"
wait-timeout="20"
min-connections="1"
inactivity-timeout="60"
connection-retry-interval="1"
max-connect-attempts="3"
/>
</data-sources>
After calling getConnection() on the Connection object in my stateless bean, I have tried checking if the Connection object is null or isClosed(), I have caught any Exception, and looped to try again, but nothing has worked.
Please respond to [email protected] or directly to this post if you can help in any way.
Thank you,
- RobHi Robert,
If you don't mind, I can only offer a few suggestions for things
to try -- I'm afraid I don't have a solution for you. Of-course,
you may have already tried these things, so please excuse me if
this is the case.
Firstly, your "data-sources.xml" file looks "different". Have
you read the "Data Sources" chapter of the "Oracle9iAS Containers
for J2EE Services Guide, Release 2 (9.0.2)"? It is accessible
from here:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a95879/ds.htm#1004903
Also, have you tried running OC4J in "debug" mode? This web
page has more details:
http://kb.atlassian.com/content/atlassian/howto/orionproperties.jsp
I get the impression from the information you have supplied,
that you may not be explicitly closing your database connections
in your code. It looks to me like you are obtaining a database
connection in your session bean, and then keeping it for the
lifetime of that bean. Is that correct? I think it's better
to obtain a connection when you need to interact with the database,
and then close the connection immediately after completing the
interaction with the database (but that's just my opinion).
Lastly, if you haven't already discovered them, these web sites
may also be of help:
http://www.orionserver.com
http://www.orionsupport.com
http://www.elephantwalker.com
Hope this helps you.
Good Luck,
Avi. -
IOException: Connection reset by peer: JVM_recv in socket input stream read
hi
I encountered a problem : a program throw out an exception:java.io.IOException: Io exception:
Connection reset by peer: JVM_recv in socket input stream read.
I tried my best to resolve it ,but unfortunately,i didn't know what caused the exception.
the following is my application environment:
I have two PC(Win2000os),one is a server which installed oracle9.2.0.2 and jdeveloper9.0.3,the another is a
client which only intalled jdeveloper9.0.3.Two days ago,i performed a web application on my client with
jdeveloper,and it includes some JSP and a javabean files.JSP Page finished uploading client xml file to a
folder on server and the javabean finished loading the xml file into a xmltype column.I can make sure the
connection is established and the javabean is OK,beacause my some jsp page can successfully use
<jsp:usebean> tag and use the javabean's some other public interfaces,except the interface that finishs
loading the xml file into a xmltype(clob) column.
Then i do many tests!I changed the javabean to a java class incluse a main method beacause it is easy to
debug.Finally i found the following code caused the exception:
public CLOB writetoClob( CLOB clob, InputStream is )throws SQLException, IOException {
InputStreamReader reader = new InputStreamReader( is );
Writer writer = clob.getCharacterOutputStream( );
char[] buffer = new char[clob.getChunkSize( )];
int charsRead;
for ( charsRead = reader.read( buffer ); charsRead > -1;charsRead = reader.read( buffer ) ) {
writer.write( buffer, 0, charsRead );
writer.close();
return clob;
when it runs to writer.close(),the exception is caused!
Then i copy the java class to the server,it runs ok!
That is to say ,the same code,the different result!
But when i run my web application on server with jdeveloper Embedded OC4J Server and a jsp page loaded javabean
and run to mentioned code ,the same exception occured!
I checked the application log in event viewer,the descriptions was:
The data buffer created for the "AppleTalk" service in the "C:\WINNT\system32\atkctrs.dll" library is not
aligned on an 8-byte boundary. This may cause problems for applications that are trying to read the
performance data buffer. Contact the manufacturer of this library or service to have this problem corrected or
to get a newer version of this library.
I search some some resolution about this exception with web and someone sayed :
This basically means that a network error occurred while the client was receiving data from the server. But
what is really happening is that the server actually accepts the connection, processes the request, and sends a
reply to the client. However, when the server closes the socket, the client believes that the connection has
been terminated abnormally because the socket implementation sends a TCP reset segment telling the client to
throw away the data and report an error.
Sometimes, this problem is caused by not properly closing the input/output streams and the socket connection.
Make sure you close the input/output streams and socket connection properly. If everything is closed properly,
however, and the problem persists, you can work around it by adding Thread.sleep(1000) before closing the
streams and the socket. This technique, however, is not reliable and may not work on all systems.
In general,the following information is conclution:
Web application runs error both on client and on server.
If it was changed to a client java class,it only run ok on server!
i have done anything that i can do now,i feel depressed very much!
how can i resolve the problem!
Any a little help will be appreciated!
regards!
Thanks
Jiawei ZHAOHow can i solve the problem.
Thanks in advance!
Jiawei Zhao -
Netscape Error: Connection reset by peer
I am running a JSP application on weblogic and when I view in Netscape 4.08 on
W2K I am getting an error saying Netscape Error:Connection reset by peer. Anyone
else see same error. Any fixes?
do u see this on the 5.1 line ?
Netscape needs a content-length for every response that comes in, and in case the
response is larger than the buffer size, the content-length isnt set and netscape
keeps hovering even after getting all the data.
When it sees that the connection has been closed from the other side, it thinks that
the connection has been reset. (even after the server sends it a Connection: Close
header)
solns can be summed up as:
1. call response.setContentLength whereever possible
2. increase the buffersize of jsps (there might be an upperlimit though)
3. move to another version of netscape (atleast > 4.7 ) on win2k
let me know how the workarounds are
thanks
Nagesh
Mettu Kumar wrote:
> which version of wls are u using and what sp's?
>
> Kumar.
>
> Kyle Donovan wrote:
>
> > I am running a JSP application on weblogic and when I view in Netscape 4.08 on
> > W2K I am getting an error saying Netscape Error:Connection reset by peer. Anyone
> > else see same error. Any fixes?
-
POSIX error: Connection reset by peer
Hi,
I have the following error appear when I download images from a website and get this error in the download palette:
POSIX error: Connection reset by peer
Does anyone know what this is?
Is is the website causing it or my Mac?If it only happens from a given site, then it is the site. If it happens all the time, then it is either your Internet connection or your Mac.
Mihalis.
Maybe you are looking for
-
Why did my Windows 8 computer stop recognizing my ICD-PX820 to upload files?
I have been using my Sony ICD-PX820 recorder with my Lenovo Idea Pad, which I purchased a year ago running Windows 8 (which has since updated to Windows 8.1) I have been able to plug my recorder into this computer, using this OS, to upload audio file
-
I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?
-
I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
I have Elements 10 when I select a thumbnail from organizer it will not open in editor what do I do?
-
bonjour Je travaille sur l'acquisition des signaux à travers le cRIO. J'ai réalisé un VI pour chaque signal et un VI principal dans le quel j'ai mis un bouton pour Chaque VI mon problème est que je veux que le Vi s'exécute méme s'il n'est pas ouvert
-
Can I switch out my current phone with another color?
Can I switch out my current phone with another color? I have black and I would prefer the silver. My parents got it for as a surprise so I didn't speak up and tell them I didn't like the color. So I have been using it for about a month. Can I just ta