What is ctu_params structure in call transcation

what is ctu_params structure in call transcation

Hi Sudheer,
Please check this link
Re: problem with table control!
CTU_PARAMS
CTU_PARAMS is a structure used to control processing of CALL_TRANSACTION.
CALL TRANSACTION (...) OPTIONS FROM opt.
Look at CALL TRANSACTION - Calling a Transaction or other threads like CTU_PARAMS
Generally CTU_PARAMS Is used to avoid unnecessary screens,even though they will not appear in the recording.
Best regards,
raam

Similar Messages

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

What is the diffreence between call transaction and session method

hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.

CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala

What is organizational structure?

Hi All,
I searched in sap help, found the definition of "Organizational Structure"(such as company code, purchase organization and so on) is hard to understand. Could you provide answers to my questions below:
1. what is org. structure in sap?
2. difference between in sap and a real company( in a company we have a lot of departments, we also call them as organization structure).
3. why not sap use departments as Org structure?
Thanks in advance! Point will be rewarded.
Regards,
Alex

Dear Alex ,
The concept of an organizational structure has already been provided by you . In SAP we depict the organization in the way it is .
Depending on how you want to use Organizational Management, you must decide which units you want to include in your organizational structure. For a rough depiction, you can restrict the structure to the main departments. For a more detailed depiction, you can also include subsections and work groups, for example.
According to this organizational structure, you can execute evaluations data, or , in Workflow, you can search for the agent of a task.
You carry out assignments and restrictions in the representation of an organizational structure.
For further understanding you may go through this pdf link :
http://www.idi.ntnu.no/emner/tdt4730/pdf/brinkman-ch7.pdf
pLEASE assign full points if found useful .
Regards
Deepesh

HT1386 Just downloaded 7.2 into my Iphone 5 what a mess. Dropped called no audible notifications for email or text messages. Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize th

Just downloaded 7.2 into my Iphone 5 what a mess. Dropped called no audible notifications for email or text messages. Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone. I have gone thur the steps for windows 7 and still nothing??? I have downloaded the newest version I itunes too.

Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden

How to add error message to return structure of calling BAPI from a BADI

i have a bapi where a badi is triggered.this badi method has just importing and changing parameters.is there any way with which i can add error message to the return structure of calling bapi.please reply at the earliest.High points can be expected.

thanks got it

I have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair

i have a laptop mac 3 years old i did not pay the extend warranty plan, so know i can't update the iPhone 5 because thai do not accepted a update for iTunes the new version what i have to do call to apple or make repair

You need to be running Mac OS X 10.6.8 or newer to sync the iPhone 5; this may require buying a Mac OS X 10.6 DVD from the online Apple Store. OS upgrades aren't covered by the warranty.
(77198)

What bapi return structure consists

Hi experts,
can anybody clarify my doubt regarding bapi's used for data transfer.
when we r using bapi for data transfer how error transactions will be handled.
what exactly return structure consists. can we get error transactions log in the return structure.
plz reply me.
Regards
Trinadh.

Moderator message - Please search before asking
Please do not spam the forum with this sort of question
post locked

Set the field value, call transcation T-CODE in CRM

Hello
I face the proble as follow: select the field into the itab,and set the field itab-field to call transcation T-CODE in CRM.
exp:call T-CODE:"CRMD_BUS2000111". when I execute the program, display the opportunity value screen, not the init select&result screen.
Thanks!

Please reward and close your other post regarding a similar problem.
If you don't want the initial screen, you have fill the BDC data for the initial screen and then call the transaction with mode 'E'. I gave the same solution to your previous question.

How to handle lock object in BDC call transcation method?

Hi,
how to handle lock object in BDC call transcation method?
Thanks In advances.

If you are updating Z-fields then you need to create a lock entry, before you use call transaction.
After creating lock object, please use FM Enqueue_<lockname> before CALL transaction and FM Dequeue_<lockname> after you have commited your data.
Thanks,
Kartavya

Message type in BDCMSGCOLL Structure in Call transaction using BDCDATA

Hi,
We are facing issue while capturing message in BDCMSGCOLL structure in Call transaction using bdcdata. The message which are like
Message 'Message Text' Type 'S' Display LIke 'E' .
This message is captured as Success on the Message structure instead of error & user are asking to update it as Error as it is looking like Error message to the end user.
Please provide resolution to the issue.
Regards,
Kapil

Hi Venkat,
I am not doing any upload, i am just doing a replay of the transaction ME21 & in that there are many error message which encounter while creating a PO but when i have check the logic , they are basically a success message which are display like Error so when i have called ME21 transaction using below statement
call transaction ME21 using BDCDATA
into messages bdcmsgcoll.
I am getting the message as success only since the message are of type success but as they are display like E , so user want that in msgcoll structure these messages must be shown as Error.
Regards,
Kapil.

What is Organization structure in IS Utilities

Dear Experts,
I'm new to IS Utilities, Can any one explain bellow concepts:
1. What is Organization Structure in IS Utilities and How it helps?
2. How and Where can we configure that?
3. any Building Block for this concept?
Kindly provide me the relavent links/Docs for further understanding... many thanks in Advance
Srujan

Org, structure defn can be different for different industries, but in general it can be defined as mentioned below.
Org. Structure is:
You use the organizational structure to represent and process
disciplinary assignments, remuneration flows and statistical aggregations.
As asked by you 1 example for this is:
In an insurance company, the organizational structure models the
hierarchical picture of an organization (generally sales and distribution), in particular for
the derivation of overriding commissions.
One more definition for Org. Structure which can throw more light in understanding this is:
"A hierarchy in which the organizational units in an enterprise are arranged according to tasks and functions.
The organizational structure differs from the administrative enterprise or personnel structure, whose
structural elements are relevant to payroll accounting and accounting."
Please mark thread as answered if you get satisfactory answer.
Thanks,
Abhishek

Does anyone know what job(s) is/are called when processing applications ??

I need to find out what job(s) is/are called in BPC 5.1, when I tick the box marked "Process Application" (in Admin Manager) and then hit "Modifiy Application".
Basically, I need to schedule this task, but the AdminTask_Process in SSIS does not do all of the required steps (such as rebuilding dependency tables).
I have asked SAP this question a week ago, but had nothing back, so I'm hoping that someone on here can point me in the right direction.
Thanks
Craig

As you probably know, a full optimize of any application(s) deletes the dependencies from the FACT tables of thos app's.
Without the dependencies, a lot of our larger jobs fail, as there are no indexes to refere to, so the entire tables are searched/updated.
To avoid the failures, after running a full optimize, we have to manually process each application that was affected (currently 7 apps) in Admin Manager.
Part of the full process is to rebuild the dependencies (amongst other things)
As you can imagine, this is a time-consuming process, and one of my colleagues is having to dial in to our systems to perform this task each Sunday. (We have reduced the full optimizes to once a week because of this problem).
We need to get back to daily optimizes, but this is impossible right now, because of this problem.
This is why I need to be able to schedule it - I would schedule the full optimization for, say, 3am, followed by a scheduled task to run the process job at 5am to rebuild the dependencies and re-index before anyone starts work each day.
I know that the problem is fixed in SP11 of 5.1 (and in SP6 of v7), but whilst this is released 18/09/09, it will be months before we are ready to implement it due to testing and deployment windows.
So I need to know what procedure(s) are called when I tick the "Process Application" box in Admin Manager and hit "Modify Application".
As it is a simple tick-box, there has to be a check in the software that says "If this box is ticked then do this, this and this"
I just need to know what "this, this and this" are.
In the meantime, I have come up with a "dirty" way to do it, which is by dropping and recreating the Stored Procedures that depend on the FACT tables.
By doing that, they automatically update the FACT table dependency list and re-index.
However, as I am just imitating the jobs that I can see running through SQL Profiler, I could easily be missing steps.
Therefore, I would like to be able to just call the BPC process that controls the Processing job.
Hope that helps.
Any suggestions ???
Thanks
Craig

Under settings, then under phone, what exactly does Show My Caller ID do?

under settings, then under phone, what exactly does Show My Caller ID do? Does it block my number when calling someone, or does it not show the numbers of incoming calls?

Thanks! Can you also block your number when sending a text?

What is a gateway proxy?? what are synchronous and asynchronous calls?

bapis are rfc enabled. but are there any other rfc's available in sap? what is a gateway proxy?? what are synchronous and asynchronous calls?

Hello:
Lets st art at the beginning.
There are NO documented viruses that affect a Mac running OS X - none (there are instances of Malware).
Gateway GEO-IP/BOTNET Alert
This is a Youtube video that explains what you have (I assume you installed it somehow) on your computer:
http://www.youtube.com/watch?v=JwRi2me2hSk
For openers, I would uninstall any A/V software you have put on your system. It is certainly possible that that junk has put some other stuff on your computer.
I'm also afraid my computer might have been hacked?
Highly unlikely.
Barry

What is ctu_params structure in call transcation

Similar Messages

Maybe you are looking for