What is custom raised event?

Hi,
What is custom raised event in OPA.
I heard that at the time of OPA online training in last week.

The built in Error and Warning events allow you to do things imperatively at run-time. E.g. validate that certain data pre-conditions are not violated with data being passed from an external system.
For example:
Error(“age must be a whole number of years”, age) if
round(the person’s age, 0) <> the person’s age
The custom event mechanism provides an extensible way of flagging other things imperatively if certain conditions are met.
For example:
raiseevent LogExternalAccess( "External access by user:", the user's id, CurrentDateTime() ) if
the user's category is external
Where "LogExternalAccess" in this case is the name of an event for which an inferencing listener has been created in Java or C# to look for, and perform some action, such as writing the information provided to the event to a log file.
Davin.

Similar Messages

FRM-40735- when-custom-item-event trigger raised.

hi all
while logging in i am getting the following error.
FRM-40735- when-custom-item-event trigger raised unhandled exception ORA-06508.
and when i press the button then getting the following error.
FRM-40735-when-button-pressed trigger raised unhandled exception ORA-06508.
plz help me out.thanks in advance.
sarah

SarahSarahSarah wrote:
Yes i am keeping the path but i checked without path too.I want to regenerate webutil.plx.i tried by using ctrl+t ,shift+ctrl+k and ctrl+k but it did not generat plx.what should i do to regenerat plx?is it giving any error when you try to generate it using ctrl + t .?
Also try closing the builder
set FORMS_PATH with your working directory (do also keep webutil.pll and webutil.olb) in that.
Open the builder again and try generating

FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065

Please help....This error is comming when opening the form. The form is running on oracle 11g 64bits web logic.
"FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065"

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

Frm-40735 when-custom-item-event trigger raised unhandled exceptionora06508

frm-40735 when-custom-item-event trigger raised unhandled exception ora-06508.
While logging in, I am getting the above message,
If I click on ok i am able to proceed and do the task.
My problem here is to remove this error.
Any one plz help out?

Welcome to OTN
Before posting on this forum please read
931068 wrote:
frm-40735 when-custom-item-event trigger raised unhandled exception ora-06508.So
ORA-06508:     PL/SQL: could not find program unit being called
Cause:     An attempt was made to call a stored program that could not be found. The program may have been dropped or incompatibly modified, or have compiled with errors.
Action:     Check that all referenced programs, including their package bodies, exist and are compatible. Hope this helps
If someone's response is helpful or correct, please mark it accordingly.

FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.

Hi Expert,
Forms Version : 11.1.2.1.0
Client JRE : 1.6.0_45-b06 Java HotSpot(TM) Client VM
Run webutil_demo form, http://host:9001/forms/frmservlet?form=webutil_demo.fmx&config=webutil
it appears following error.
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
No error logged in java console client side.
I've try to re-compile webutil_demo.fmb
Unattaching and then re-attaching the plsql library webutil.pll to forms using a 11g Forms Builder (instead of earlier version) and then loading the form to the server and compiling form but error still exist.
Will you please help to give any suggestion?
Is there any trace can be enabled to find some more details?

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

When-custom-item-event

Hello!
I have problem with webutil.pll in runtime.
When i run my form i get the next exception:
"when-custom-item-event trigger raised unhandled exception ORA-06508".
When i moved webutil_core and delimstr to program units the forms run fine.
What can be a problem?
Thanks.

Webutil was compiled in my database schema.
I see that if i move my forms in same directory with webutil.pll and then re-attache the pll - no exception in runtime.
When i can remove pll from this directory and my form contunue to work fine.
Do you have any explanation?
Message was edited by:
Aver

When to use Custom Adapter, Event Beans and Spring beans

Hi,
I have basic question on when or on what basis/scenario the Custom Adapter, Event Beans or Spring beans should be used.
All three has same implementation methods.
Please help me in understanding when to use Custom Adapters, Event Beans or Spring beans.
Thanks,
Sri
Edited by: 897694 on Mar 7, 2012 8:12 AM

custom adapters:
you have to use a custom adapter when you don't find any adapter in ocep which will serve your purpose.
Most of the times you use an adapter to connect the application with external things like http server, etc It can be both to listen the events or to send the events outside.
Event Beans:
This type of beans does most of the work that an adapter code does but in convention beans are not used to connect the application with external stuff
You can use Beans as event sink etc In this case using an using an adapter is not suggestable.
If you implement Interfaces like Initializing Bean for an adapter code it won't work properly, you have to use an event Bean in that case.
Spring beans:
Spring beans are used when the bean code doesn't implement EventSink or EventSender.
These beans are used to enable something (eg: make ${wlevs_dev_home}/abc/a/b.java this path is not understandable by java code unless you override the path using a spring bean)
Most of the things which doesn't need a connection between components in the application (eg cache loader: you can do this using spring beans and event beans both but spring beans doesn't need a connection with cache)
Hope this small writeup helps you :)
Edited by: Patha on Mar 8, 2012 9:10 AM

Taskflow Raise event foucs problem

Hi,
We are using Oracle ADF JDeveloper version 11.1.1.4 (released version) for our development.
We have used several taskflows / reusable taskflows in our application. For most of the taskflows we have "raised events".
However we are facing strange problem with the same.
For example:
Consider a screen where height of the screen is more than the WINDOWS height. For such a screen vertical scroll bar will be there.
There is a taskflow which is at the bottom of the screen. To see that taskflow user will use the vertical scroll and will reach there.
If USER performs any action on this taskflow then events get fired correctly but the focus atomically gets shifted to first element of the screen. Due to this behavior USER needs to scroll the screen every time which is irritating. If we disable the raise event focus doesn’t shift.
Can somebody look into this?

Hi,
customer support would be a good point of contact for analyzing the problem if you have a test case. I can only assume you are talking about contextual events ?
Frak

Delay - job created by the RAISE EVENT

It's possible to change the scheduling of a job created by a RAISE EVENT, and instead of executing immediately, to schedule it as +1 minute delay?
Thanks!
PS: i have to wayt because, after the event, some tables are updated in my program and i have to wait the commit
Edited by: Was Wasssu on Sep 6, 2010 9:08 AM

That's true, but from the sparse information in the original post I understood that he is issueing a COMMIT WORK anyway in his code. So Mr. Wasssu, are you inside a customer exit? Anything else we need to know?
Thomas

C# COM server events "lost" when raising events while Excel is in edit mode

I posted this question on StackOverflow (http://stackoverflow.com/questions/23798443/c-sharp-com-server-events-lost-when-raising-events-while-excel-is-in-edit-mode) but did not receive a good answer, so I'm trying my luck here.
I have an in-proc COM server written in C# (using .NET Framework 3.5) that raises COM events based on this example: http://msdn.microsoft.com/en-us/library/dd8bf0x3(v=vs.90).aspx
Excel VBA is the most common client of my COM server. I’ve found that when I raise COM events while Excel is in edit mode (e.g. a cell is being edited) the event is “lost”. Meaning, the VBA event handler is never called (even after the Excel
edit mode is finished) and the call to the C# event delegate passes through and fails silently with no exceptions being thrown. Do you know how I can detect this situation on my COM server? Or better still, make the event delegate call block until
Excel is out of edit mode?
I have tried:
Inspecting the properties of the event delegate – could not find any property to indicate that the event failed to be raised on the client.
Calling the event delegate directly from a worker thread and from the main thread – event not raised on the client, no exceptions thrown on the server.
Pushing the event delegate onto a worker thread’s Dispatcher and invoking it synchronously – event not raised on the client, no exceptions thrown on the server.
Pushing the event delegate onto the main thread’s Dispatcher and invoking it synchronously and asynchronously – event not raised on the client, no exceptions thrown on the server.
Checking the status code of the Dispatcher.BeginInvoke call (using DispatcherOperation.Status) – the status is always ends with “Completed”, and is never in “Aborted” state.
Creating an out-of-proc C# COM server exe and tested raising the events from there – same result, event handler never called, no exceptions.
Since I get no indication that the event was not raised on the client, I cannot handle this situation in my code.
I have tested this with Excel 2010 and Excel 2013.
Here is a simple test case. The C# COM server:
namespace ComServerTest
public delegate void EventOneDelegate();
// Interface
[Guid("2B2C1A74-248D-48B0-ACB0-3EE94223BDD3"), Description("ManagerClass interface")]
[InterfaceType(ComInterfaceType.InterfaceIsDual)]
[ComVisible(true)]
public interface IManagerClass
[DispId(1), Description("Describes MethodAAA")]
String MethodAAA(String strValue);
[DispId(2), Description("Start thread work")]
String StartThreadWork(String strIn);
[DispId(3), Description("Stop thread work")]
String StopThreadWork(String strIn);
[Guid("596AEB63-33C1-4CFD-8C9F-5BEF17D4C7AC"), Description("Manager events interface")]
[InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
[ComVisible(true)]
public interface ManagerEvents
[DispId(1), Description("Event one")]
void EventOne();
[Guid("4D0A42CB-A950-4422-A8F0-3A714EBA3EC7"), Description("ManagerClass implementation")]
[ComVisible(true), ClassInterface(ClassInterfaceType.None)]
[ComSourceInterfaces(typeof(ManagerEvents))]
public class ManagerClass : IManagerClass
private event EventOneDelegate EventOne;
private System.Threading.Thread m_workerThread;
private bool m_doWork;
private System.Windows.Threading.Dispatcher MainThreadDispatcher = null;
public ManagerClass()
// Assumes this is created on the main thread
MainThreadDispatcher = System.Windows.Threading.Dispatcher.CurrentDispatcher;
m_doWork = false;
m_workerThread = new System.Threading.Thread(DoThreadWork);
// Simple thread that raises an event every few seconds
private void DoThreadWork()
DateTime dtStart = DateTime.Now;
TimeSpan fiveSecs = new TimeSpan(0, 0, 5);
while (m_doWork)
if ((DateTime.Now - dtStart) > fiveSecs)
System.Diagnostics.Debug.Print("Raising event...");
try
if (EventOne != null)
// Tried calling the event delegate directly
EventOne();
// Tried synchronously invoking the event delegate from the main thread's dispatcher
MainThreadDispatcher.Invoke(EventOne, new object[] { });
// Tried asynchronously invoking the event delegate from the main thread's dispatcher
System.Windows.Threading.DispatcherOperation dispOp = MainThreadDispatcher.BeginInvoke(EventOne, new object[] { });
// Tried synchronously invoking the event delegate from the worker thread's dispatcher.
// Asynchronously invoking the event delegate from the worker thread's dispatcher did not work regardless of whether Excel is in edit mode or not.
System.Windows.Threading.Dispatcher.CurrentDispatcher.Invoke(EventOne, new object[] { });
catch (System.Exception ex)
// No exceptions were thrown when attempting to raise the event when Excel is in edit mode
System.Diagnostics.Debug.Print(ex.ToString());
dtStart = DateTime.Now;
// Method should be called from the main thread
[ComVisible(true), Description("Implements MethodAAA")]
public String MethodAAA(String strValue)
if (EventOne != null)
try
// Tried calling the event delegate directly
EventOne();
// Tried asynchronously invoking the event delegate from the main thread's dispatcher
System.Windows.Threading.DispatcherOperation dispOp = System.Windows.Threading.Dispatcher.CurrentDispatcher.BeginInvoke(EventOne, new object[] { });
// Tried synchronously invoking the event delegate from the main thread's dispatcher
System.Windows.Threading.Dispatcher.CurrentDispatcher.Invoke(EventOne, new object[] { });
catch (System.Exception ex)
// No exceptions were thrown when attempting to raise the event when Excel is in edit mode
System.Diagnostics.Debug.Print(ex.ToString());
return "";
return "";
[ComVisible(true), Description("Start thread work")]
public String StartThreadWork(String strIn)
m_doWork = true;
m_workerThread.Start();
return "";
[ComVisible(true), Description("Stop thread work")]
public String StopThreadWork(String strIn)
m_doWork = false;
m_workerThread.Join();
return "";
I register it using regasm:
%SystemRoot%\Microsoft.NET\Framework\v2.0.50727\regasm /codebase ComServerTest.dll /tlb:ComServerTest.tlb
Excel VBA client code:
Public WithEvents managerObj As ComServerTest.ManagerClass
Public g_nCounter As Long
Sub TestEventsFromWorkerThread()
Set managerObj = New ComServerTest.ManagerClass
Dim dtStart As Date
dtStart = DateTime.Now
g_nCounter = 0
Debug.Print "Start"
' Starts the worker thread which will raise the EventOne event every few seconds
managerObj.StartThreadWork ""
Do While True
DoEvents
' Loop for 20 secs
If ((DateTime.Now - dtStart) * 24 * 60 * 60) > 20 Then
' Stops the worker thread
managerObj.StopThreadWork ""
Exit Do
End If
Loop
Debug.Print "Done"
End Sub
Sub TestEventFromMainThread()
Set managerObj = New ComServerTest.ManagerClass
Debug.Print "Start"
' This call will raise the EventOne event
managerObj.MethodAAA ""
Debug.Print "Done"
End Sub
' EventOne handler
Private Sub managerObj_EventOne()
Debug.Print "EventOne " & g_nCounter
g_nCounter = g_nCounter + 1
End Sub
This problem also occurs for a C++ MFC Automation server that raises COM events. If I raise the COM event from the main thread when Excel is in edit mode, the event handler is never called. No errors or exceptions are thrown on the server,
similar to my C# COM server. However, if I use the Global Interface Table to marshal the event sink interface from the main thread
back to the main thread, then invoking the event - it will block while Excel is in edit mode. (I also used COleMessageFilter to disable the busy dialog and not responding dialogs, otherwise I'd receive the exception:
RPC_E_CANTCALLOUT_INEXTERNALCALL It is illegal to call out while inside message filter.)
Knowing that, I tried to do the same on my C# COM server. I could instantiate the Global Interface Table (using the definition from pinvoke.net) and the message filter (using the IOleMessageFilter definition from MSDN). However, the event still
gets "lost" and does not block while Excel is in edit mode.
Here's my additional C# code to try to make use of the Global Interface Table:
namespace ComServerTest
// Global Interface Table definition from pinvoke.net
ComImport,
InterfaceType(ComInterfaceType.InterfaceIsIUnknown),
Guid("00000146-0000-0000-C000-000000000046")
interface IGlobalInterfaceTable
uint RegisterInterfaceInGlobal(
[MarshalAs(UnmanagedType.IUnknown)] object pUnk,
[In] ref Guid riid);
void RevokeInterfaceFromGlobal(uint dwCookie);
[return: MarshalAs(UnmanagedType.IUnknown)]
object GetInterfaceFromGlobal(uint dwCookie, [In] ref Guid riid);
ComImport,
Guid("00000323-0000-0000-C000-000000000046") // CLSID_StdGlobalInterfaceTable
class StdGlobalInterfaceTable /* : IGlobalInterfaceTable */
public class ManagerClass : IManagerClass
//...skipped code already mentioned in earlier sample above...
//...also skipped the message filter code for brevity...
private Guid IID_IDispatch = new Guid("00020400-0000-0000-C000-000000000046");
private IGlobalInterfaceTable m_GIT = null;
public ManagerClass()
//...skipped code already mentioned in earlier sample above...
m_GIT = (IGlobalInterfaceTable)new StdGlobalInterfaceTable();
public void FireEventOne()
// Using the GIT to marshal the (event?) interface from the main thread back to the main thread (like the MFC Automation server).
// Should we be marshalling the ManagerEvents interface pointer instead? How do we get at it?
uint uCookie = m_GIT.RegisterInterfaceInGlobal(this, ref IID_IDispatch);
ManagerClass mgr = (ManagerClass)m_GIT.GetInterfaceFromGlobal(uCookie, ref IID_IDispatch);
mgr.EventOne(); // when Excel is in edit mode, event handler is never called and does not block, event is "lost"
m_GIT.RevokeInterfaceFromGlobal(uCookie);
I’d like my C# COM server to behave in a similar way to the MFC Automation server. Is this possible? I think I should be registering the ManagerEvents interface pointer in the GIT but I don't know how to get at it? I tried using Marshal.GetComInterfaceForObject(this,
typeof(ManagerEvents)) but that just throws an exception: System.InvalidCastException: Specified cast is not valid.
Thanks.

Hi Jason-F,
I’ve found that when I raise COM events while Excel is in edit mode (e.g. a cell is being edited) the event is “lost”. Meaning,
the VBA event handler is never called (even after the Excel edit mode is finished) and the call to the C# event delegate passes through and fails silently with no exceptions being thrown.
Do you mean you didn't raise EventOne event? EventOne handler like following?
' EventOne handler
Private Sub managerObj_EventOne()
Debug.Print "EventOne " & g_nCounter
g_nCounter = g_nCounter + 1
End Sub
After test your code, here is my screenshot
And here is my execute log in C# ComServerTest.
ManagerClass1/1/2015 5:48:11 PM
DoThreadWork()1/1/2015 5:48:12 PM
ManagerClass_EventOne()1/1/2015 5:48:17 PM
ManagerClass_EventOne()1/1/2015 5:48:22 PM
ManagerClass_EventOne()1/1/2015 5:48:27 PM
ManagerClass_EventOne()1/1/2015 5:48:32 PM
ManagerClass_EventOne()1/1/2015 5:48:37 PM
ManagerClass_EventOne()1/1/2015 5:48:42 PM
ManagerClass1/1/2015 5:49:56 PM
DoThreadWork()1/1/2015 5:49:56 PM
ManagerClass_EventOne()1/1/2015 5:50:01 PM
ManagerClass1/1/2015 5:50:04 PM
If i misunderstand you, please feel free to let me know.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RAISE EVENT usage in real world

Hi,
I wonder what is the advantage of the statement RAISE EVENT in contrast to a normal call to a class method.
Given the following example coding:
METHOD pai_0100.
CASE ok_code.
    WHEN 'START'.
      RAISE EVENT read_sflight_data_event EXPORTING i_carrid = i_carrid.
ENDCASE.
ENDMETHOD.
This will raise the event read_sflight_data_event. This event calls the method read_sflight_data set as handler in the class constructor:
METHOD constructor.
SET HANDLER me->read_sflight_data FOR me.
ENDMETHOD.
Reading data from database...
METHOD read_sflight_data.
IF NOT i_carrid IS INITIAL.
    SELECT * FROM sflight INTO TABLE gt_sflight
      WHERE carrid = i_carrid.
ELSE.
    SELECT * FROM sflight INTO TABLE gt_sflight.
ENDIF.
ENDMETHOD.
Of course I could have written, too:
METHOD pai_0100.
CASE ok_code.
    WHEN 'START'.
      me->read_sflight_data( i_carrid = i_carrid ).
ENDCASE.
ENDMETHOD.
Which results in exactly the same result of course, however what is the advantage of events in real world? When is it useful to raise an event instead of calling the event handler directly?
Thanks for shedding some lights on this topic.

You don't have to look far to get real world SAP examples for event handling:
<ul style="list-style:circle!important">
<li>Workflow (e.g. trigger an event upon creation/change of a document)</li>
<li>ALV (e.g. react to user input like a double click)</li>
<li>Job control (e.g. fire a job upon a specific event)</li>
</ul>
When you look at the examples it's obvious that the event producer doesn't necessarily know anything about any possible future event consumers: You can ignore events, have one or multiple listeners and the listeners are usually separate from the coding unit that raised the event. Note that it depends on the event handling framework how events are processed (e.g. asynchronous versus synchronous, sequential versus parallel). For class based events the event handler processing is synchronous and sequential; for multiple event handlers their execution sequence is based on their registration order (see [raise event|http://help.sap.com/abapdocu_70/en/ABAPRAISE_EVENT.htm]).
In a simple example like the one you gave I'd say the event handling approach is possibly questionable (at least as long as all the event listeners are within the same class and there is clearly no need for other objects to listen to this event). Anyhow, the example is probably designed to show the gist of event handling, but sometimes examples from SAP look overly complicated because they seem to prefer the [SoC|http://en.wikipedia.org/wiki/Separation_of_concerns] design principle over [KISS|http://en.wikipedia.org/wiki/KISS_principle] (couldn't resist this little rant).
Cheers, harald

Query to clear raised events in CPS

Hi,
Is there a query to clear raised events in Redwood ?
Our CPS did not restart properly this WE and all the Event File Definition wich was started are now going in a pending status. The problem is that the raised ones are not visible in the monitoring (I cannot clear them !) and auto-submit jobs are not running anymore as new event file are pending !
How can I clear them (as they'aren't in the monitoring) ?
I solved my problem by creating a new file Event Definition for one of the job and it ran but I cannot do that (itu2019s not a solution) for all the jobs which were running correctly before.
We restart Redwood but event are still going in a pending status, I donu2019t see any operator message.
So, this problem is not similar with the one I opened a few days ago.
If someone can help, Iu2019ll really appreciate it.
Clement.

Hi Preethish,
Yes, I'm able to submit the Job Chains manually and I already Clear all Pending events. But no way, still going in pending status.
What I did to workaround my problem, I create new event definitions for those job chains but I don't want to correct the problem that way if this happens again; It's not a solution as I've too many jobs.
Regards
Clement.

TCA Business Object Events: Raise Events Program

Hi,
We are integrating two ebiz instances using SOA and both the instances currently are on 11.5.10. We have back ported patches from ebiz 12i into these instances to use TCA Business Objects functionality(Business Object API's and events). I have a few questions realted to the concurrent program "TCA Business Object Events: Raise Events Program":
1) Do I need to schedule this concurrent program to raise business object events?
2) Is there an alternate way to raise these business object events(any profiles)?
Appreciate if someone can answer these questions.
Thanks,
Sak

Hi,
We use AIA and TCA Business Object Events program to integrate from one Ebiz instance to another.
To achieve what you want I would not do anything in SOA.
In out integration TCA ends up putting messages into WF_BPEL_Q.
I would use the following process: (Assuming offline time is a possibility)
1. Retire the parts of AIA that dequeue from WF_BPEL_Q. (depending on how messages are picked up.)
2. Create a PLSQL script that dequeues all messages from WF_BPEL_Q but dosn't process them. Using relevant select statements you can dequeue by message ID and select only relevant messages
3. Run whatever process you need that puts fires the Raise Events Program
4. Run the script to dequeue the messages that does nothing with them.
5. Re-activate the parts of AIA that dequeue from WF_BPEL_Q
This should give you the desired effect. Just be careful you don't screen out messages that do need to be transfered.
Robert

What is CUSTOM CONTROLLER & COMPONENT CONTROLLER

hI ALL
1)what is CUSTOM CONTROLLER & COMPONENT CONTROLLER
GIVE DIFFRENCES AND ADVANTAGES OF EACH
REGARDS
BABU

Hi,
Custom Controllers -
A controller that can be defined by application development and used to share common data over several views. Custom controllers are defined for purposes that cannot be assigned to view controllers or component controllers, and serve as structuring element of a Web Dynpro application. Custom controllers use their context to communicate with their surroundings. They are used for manipulating data, or connecting to the back end.
Leaving content frame
Component Controllers-
Each Web Dynpro component contains exactly one component controller. This controller is automatically created during the component creation and contains a context, events, and methods. Unlike a view controller, the component controller is visible for all views in a component. This means, the controllers of different component views can access context elements or methods of the component controller. For this purpose, the component controller usage is automatically created for every view controller.
See this link for more details -
http://help.sap.com/saphelp_erp2005/helpdata/en/eb/e1cb5eea012b4481f8077c6023a70e/frameset.htm
The definitions explain the difference between these 2 types of controllers.
Hope this helps.
ashish

What is customizing request?

what is customizing request?
regards,
phani.

Hi Phani..
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
You can see good details on this thread:
Re: customising and workbench request
and if you need any extra information just have a look in these
http://help.sap.com/saphelp_sm40/helpdata/en/b5/90cd3a21873650e10000000a11402f/content.htm
http://web.mit.edu/ist/org/admincomputing/dev/qa_tr_faq_production.shtml
http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
http://www.planetsap.com/cts.htm
http://www.sapbrain.com/TOOLS/CTS/CTS.html
If it helps Reward with points
Regards Rk
Message was edited by:
Rk Pasupuleti

What is custom raised event?

Similar Messages

Maybe you are looking for