What is customizing request?

what is customizing request?
regards,
phani.

Hi Phani..
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
You can see good details on this thread:
Re: customising and workbench request
and if you need any extra information just have a look in these
http://help.sap.com/saphelp_sm40/helpdata/en/b5/90cd3a21873650e10000000a11402f/content.htm
http://web.mit.edu/ist/org/admincomputing/dev/qa_tr_faq_production.shtml
http://help.sap.com/saphelp_nw04/helpdata/en/3b/dfba3692dc635ce10000009b38f839/content.htm
http://www.planetsap.com/cts.htm
http://www.sapbrain.com/TOOLS/CTS/CTS.html
If it helps Reward with points
Regards Rk
Message was edited by:
Rk Pasupuleti

Similar Messages

What is the workbench request and customizing request.

can anybody explain what is workbench request and what is customizing request.

Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Diff between customizing request and workbench request

hai everybody...
i want to know the difference between customizing and workbench request.
and tell me what is customizing request?
and also what is workbench request?
thanks ...
velu.......

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Hope this info helps.
Regards,
Kumar.

What is the difference between workbench request and customizing request

hi gurus
can anyone suggest me
what is the difference between
workbench request and
customizing request
abaper ll work on which request
thank you
regards
kals.

A quick search in the forum would have taken you to this answer
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Custom Component : How to detect what charset the request used?

I want to write a file upload component, this component must use the same charset as the request used to decode file name from data post from web browser, How to detect what charset the request used?

Hi Eddie,
As Arjit suggested, there are a bunch of functions available in WEBI like GetDominantPreferredViewingLocale(), GetLocale() and GetPreferredViewingLocale(), etc. that you could use.
There are no such specific functions provided within Dashboards tool.
So, you can create a WEBI report, and have one of these formulas specified in a variable in the webi report. Then, have the block published as a BIWS and use this BIWS in your dashboard.

Releasing Customizing Request

Hi All,
I have created a layout in FBL3N in development and saved it as a customizing Request.
While releasing this request it show an error message
"8: Transport carried out with errors.
Individual objects could not be transported successfully"
How to solve this issue.
Thanks,
Bala G

Dear Markus ,
Thanks for your reply, I am repeating the same with for clear understanding
this customizing request created and released, after releasing the request ( carries 5 objects in main task and 2 in Sub task)
from DEV to PRD , when we opened the same request after importing into PRD we found the main task objects are available but
the subtask or child task objects are missing, we tried recreating a new task and tried but still not working what is the problem
Hope this is clear?
regards
Praveen

How can I re-release the Customizing request

Hi,
Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
Could I re-release the CR? How to deal with this question?
Waiting for answer, THX
jk

Dear all,
Thanks for your time. The problem is still have.
I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
I released a new customizing request, it can be find out the import queue.
I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
Which method can I choose to do that?
jk

Creating a new job and position prompts customizing request...

Dear All,
        I created a Job and Position through PP01 transaction. I am facing 2 issues while doing so...
1. System prompts for Customizing request when i try to save the new entry.
    What table/settings do i need to maintain for turning of the customizing request promptings.
2. Once i save the entries(after entering some dummy customizing requests), when i check the
    HRP1000 table for the new jobs and positions... The table entry shows 2 records for each Job and
    position. One entry with Plan version '.:' and another with active Plan version '1'.
    I need to have just one entry in HRP1000 table for each job/position with ACTIVE plan version.
   I checked T77S0 table, it has active plan version maintained against the PLOGI-PLOGI entry.
   Please let me know what table i need to maintain to handle my requirement.
Regards
Nanda

Hi Nanda,
When you create new job or position in sandbox system it will not ask for the request number,since you generally dont transport the objects from sandbox to test system.
When you create a new job or position in development system, it will always ask for request number. This is because, in most of the cases, you need to transport the job and position to test system and then to production system.
Without a customizing request you wont be able to transport those changes to next system.
Thanks,
Supriya.

Doubt in customizing request with respect to table entries

Hi All,
I have a doubt in customizing request with respect to table entries.
Suppose I have a customizing request with respect to a table that contains say 10 entries in the development system.
Now I am transporting this request to the quality system in which the same table contains 20 entries.
When I am transporting this table from the development system to the quality system, will my 10 entries in the development system get added to the 20 entries in the quality system or will my table get overwritten in the quality system.
What difference will this be if it is a workbench request ? .
Regards,
Sushanth H.S.

Hello,
So if we are transporting contents of a table from one system to another, it should always be a customizing request and not a workbench request right.
If the "Delivery Class" of the table is 'C'(Customizing table, maintenance only by cust., not SAP import) it will ask for a customizing request.
If it is 'A'(Application table (master and transaction data)), it will ask for Workbench.
To add to your previous qn, when you transport the entries to subsequent system it will always check the KEY FIELDS and then update. If you see a transport, then the table entries are represented by their key fields.
If you create new entries in your table and transport, it will add the records. Else it will modify them
Hope i am clear.
BR,
Suhas
Edited by: Suhas Saha on Jan 23, 2009 11:51 AM

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

About customizing request

hi,
what is difference between worbench request an customizing request? can give me sdetails of both?
thanks in advance
sudhakar

Hi
Check the below links.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm]
[Re: difference between requests]
[Re: customising and workbench request;
Regards

Customizing Request Application Flows in OIM 11g?

To all:
I'm trying to work through a scenario using Request Templates - I'm not sure that this approach is possible using configuration approaches and wanted to see if anyone has any useful feedback. First, let me describe the problem I'm attempting to solve:
- The users who will be using self-service will be somewhat restricted on what they can do: basically, once they have an account in OIM (this is 'automatic' from a reconciliation - there's no self-registration or user creation) they can request access to a small number of applications.
The ideal flow that we would like to follow is:
Step 1: Log in to OIM.
Step 2: Create Request
Step 3: Select the Application for requested access and the requested role.
Step 4: Enter an effective date and justification.
Step 5: Submit
... something 'application focused', not 'resource focused' as the end user community is not particularly aware (nor do they really need to be) about the details of how a user is authenticated.
I can get 'close' to this using a request template, with this flow:
Step 1: Log in to OIM
Step 2: Create a request.
Step 3: Select a Request Template. (I named the template after the application - "Select App Account")
Step 4: Select Your Resource (only one in this case - restricted to "AD User")
Step 5: Enter information about the AD account. (I can restrict this down to only allow for group selection, which is great.)
Step 6: Enter effective date, justification
Step 7: Submit
So the only thing I'd really like to 'skip' (or somehow default) is the selection of a resource and skip that step - because the template only allows for a single selection anyway, and having an extra step with a single selection that may only muddle the process would be detrimental to the usability of the request.
Is this a modification that we can make to the request flow ("If only one resource, default and move on") - or will we need to create some form of customized request process using the APIs?
I've dug into the JSF navigation in the iam-console-faces WAR file; it seems that navigation is tied up in the backing beans - has anyone else used Request Templates to meet this type of need?
My thanks in advance for any insight you can provide!

Dewan.Rajiv wrote:
It's a new flow which Oracle has introduced in OIM 11g. You can't skip that selection until you do modification in OOTB UI.
RO is mandatory thing to raise request so you can go for custom UI (Need ADF Knowledge) in which you'll ask end user to select other things except that Resource and you'll fetch RO name from some configuration file for using in request APIs.Thanks - it looks like customizing the OOTB UI might not be possible - rather than using ADF/Faces configuration files, most of the navigation redirects seem to be 'hidden away' in compiled class files. (My original thought: add some kind of filter and/or extension to an ADF Task Flow that governs the request application flow - but there are not task flow files to modify?)

Customizing request

Hi All,
what is the difference between Parent Request and Child Request?
Regards,
Sasmita

Child Request can be considered as the request which actually holds the objects to be transported & resides within Parent Request / Main Request. In T.Code: SE10, we select the appropriate request & expand the same. Now we can see the child request / request holding objects. First we release the Child request & then we release the main request, which is to be imformed to basis consultant along with approval from your project manager to be imported to relevant server.
Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka
Reward Points if Helpful.

Customizing request: Table T001L

Hi,
We are currently customizing SAP in two parallell ongoing projects. IN both projects, we must create entries in table T001L (storage locations). But the customizing must be transported at different times.
Our question: When the customizing request is released; will the complete table T001L be included in the transport or ONLY the newly added entries that were added in this request?
Our concern is that we ONLY want to include some of the storage locations in the request not all newly added entries in table T001L,
Have you come across this issue, please advice,
//Eva

SAP automatically creates a transport request for any new added locations.
It is certainly not the entire table that gets transported, like it is for calendars or account assignments.
However you can create at any time a manual transport and only include what you like.
But ..... I recommend to release the transports soon with its compelte entries, this causes less issues than keeping transports for a long time and then releasing it ( after an other one has done customizing later but transported earlier ).
I have seen it many times, especially if you transport entire table and do not release it, that newer entries got overwritten by old customizing.

Customizing request window when save the alert category

hi,
i create an alert category in the solution manager and try to save it, but the customizing request window pop up, and i have no idea what is that for.
anyone knows how to save the alert category i created?
Thanks a lot
Jessica Ding

hey, don't want to transport this alert category to prod ?? ,request is for that purpose...

What is customizing request?

Similar Messages

Maybe you are looking for