What is 'Cycle Count'?

Yesterday I checked my MBA's 'Battery Information' and under 'Health Information' the Cycle Count was 3 and today I checked it again it went up to 4. What exactly is Cycle Count and how does it work?

I've had mine for 19 weeks, and 52 battery cycles. I regularly use mine on batt until it goes red, then charge. (usually down to about 10-12%).
As for your iPhone just do it the same way, and you'll keep your battery healthy. You can also download Battery Doctor and have it help out.

Similar Messages

ABC analysis & cycle counting

Dear Gurus,
I am having doubt regarding ABC ananlysis & Cycle counting.
1. What is ABC analysis and how it can be used in SAP MM ?
2. What is cycle counting? Is there any relation b/w cycle counting and ABC analysis? If so kindly explain.
Kindly explain in detail. Thank you.

Cycle Counting is periodic counting e.g. every 2 months, every 6 months etc. etc. Typically you would not want to count every material every 2 months so you carry out an 'ABC analysis' in order to categorise your materials. You set an ABC indicator against materials and this allows you to, for example, count your more valuable materials more often.
For example your set up could be:
'A' = most valuable
'C' = least valuable
Count:
'A' materials every 2 months
'B' materials every 6 months
'C' materials every 12 months.
Regards,
Nick

What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
Doug

Hi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT

What's the average cycle count and lifespan of a PB G4 battery?

I've had my computer 15" Powerbook for about 22 months. Cycle count =367. My AppleCare warranty ends in about 14 more months. What's the average cycle count before the battery dies?
By the way, I use my computer everyday. This thing better than any other macbook pro out there. Thanks.

First, you should know that Applecare doesn't cover the battery, it is specifically excluded unless it's defective. That's because Apple considers the battery a consumable item. You can read it under limitations at http://images.apple.com/legal/applecare/docs/AppleCareProtect_Plan_NAen.pdf
Regarding the life, how you maintain the battery has an impact on how many cycles you get out of it. For example, if it's plugged in all the time, your cycle count will be low by the time the battery fails. Apple says that a properly maintained battery should be at 80% capacity after 300 cycles. This is the Apple note on battery maintenance: http://www.apple.com/batteries/notebooks.html

What is T-code to cancel physical inventory document for cycle count MICN?

HI
Please advice me what is T-code and step to cancel physical inventory document for cycle count MICN?
Thanks

There is no way to Cancel the Cycle count document. however you can click on 0 count so that it wont post any new entry on the cycle count.

Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????

Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????

No i have checked thorougly i dont have any window emulation parallel. i had a problem with my charger some days back that Apple replaced me. but after that i started having battery timing 2h 20 min maximum. the details about the MBP are as:
MacBookPro6,2
Charge Information:
Charge remaining (mAh):          2375
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          6046
Health Information:
Cycle count:          376
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1569
Voltage (mV):          11043
                                 and (eww) i have read the related article linked http://support.apple.com/kb/TS1473 . though I could not understand the 5th point of this article but i think there is no problem about that.. PLEASE HELP

What is the Significance of Late Days in Cycle Counting

Hi All,
I would appreciate if you could someone please let me know the significance of "Late Days" under Scope and Control tab in cycle counts form while defining.
We are using 12.1.3 version.
Regards,
John

Late Days tells when a scheduled count should be considered late.
So if you make late days = 5 and if you schedule a cycle count today. After 5 days, it will be considered late.
AFAIK, this field is not used in Oracle. But you can use it in reports.
Sandeep Gandhi

What is going on with this cycle count business?

I just bought my first Mac, a 13-inch Macbook Pro, about a month ago. I started learning about the cycle count and seeing where my computer stood. This morning, while unplugged from the charger, my cycle count was at 16. High, I thought, since I was under the impression that it was a full charge followed by a full discharge that registered each cycle count. I haven't used it but for maybe 20 hours of total time, so I found this to be strange.
The real problem though was when I just checked it. It's been off the charger since this morning and has dropped from about 74% when I cracked it this morning to 33% now, and it's now telling me that the cycle count is 20... 4 more cycles after just using 40% of the battery? Is this normal?
It also says the battery health is at 96%. I just find this to be quite a degredation after a couple of hours of use a week for a month.

Hi m,
I would contact Apple. You have 90 days of free AppleCare phone support.

What if I exceed in 1000 maximum cycle count in my MBA battery?

thanks for the concern and help

To add to Joey's excellent response, a quote from Apple's support website:
http://support.apple.com/kb/ht1519
"Batteries have a limited amount of charge cycles before they are considered to be consumed. Once consumed, a replacement battery is recommended. You can use your battery after it reaches its maximum cycle count, but you may notice a reduction in your battery life. Knowing how many charge cycles are on your battery and how many are left can help you determine when a battery replacement is required. For optimal performance, replace your battery when you reach the maximum cycle count."
The cycle count is just there to determine warranty eligibility; batteries past the maximum cycle count for that model are ineligible for free replacement, regardless of whether they are covered by AppleCare or hardware warranty.

Open Transfer Orders in WM Cycle Count

Hi experts:
My client wants to implant cycle counting in WM, we are using MIBC for CC indicator analysis and LX26 to create inv. doc. The material master is ready with the CC indicators. But my client wants to know what open TO´s are already created for the materials to be counted in LX26.
Is there any procedure to list all TO´s that are open for materials displayed in MIBC analysis?
Working on SAP ECC 6.0
Thanks in advance.

Hi,
1. You should check unprocessed TRs in LB10. (processing those TRs you can get the TOs).
2. Unconfirmed TOs can be checked in LT22.
3. Please also check LU04 for open PCNs.
You should also have a look at interim storage types, negative stock maybe indicates that after IM booking necessary WM booking were not executed (LB10 and LU04 can aslo give information on these).
Regards,
Csaba

Cycle Counting procedures in ECC 6.0

HI all.,
SUB: Cycle counting in ECC 6.0 with WM implemented
Ref : Industry : Apparel
What would be the differences in the cycle counting procedure working on Version 4.6C and ECC 6.0.?
In 4.6C , we normally change the indicators of A,B,C or D in OMCO and set the parameters of frequency of cycle counting , say yrly, half yearly, quarterly or monthly.
Would the cycle counting procedure be the same with ECC 6.0?
I understand that from Version 5.0, we can do cycle counting without freezing the book stock i.e have open transfer orders unlike in 4.6C wherein we have to stop GR or GI at the time of cycle count.
Is the procedure same in ECC 6.0 ?
Do educate further on the Cycle count procedure for ECC 6.0 with WM implemented for an AFS related industry.
Thanks

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

How to upload the Cycle Count Indicator from ERP into EWM

Hello Gurus,
Can someone tell me what the transaction is to upload the Cycle Count Indicator from the ERP into EWM? I am currently researching the cycle count functionality of EWM for a roll-out at our facility, and this information would be most helpful.
As I understand it, there are transactions for the Global Material Master Data upload, Storage Unit Type in the Palletization Data fields of the ERP (which seems to be translated as the SUT to Packing Material), and Unit of Measure management. Also, judging by a document I found, the Cycle Count Indicator isn't uploaded in the Global Material Data, but I did see that the field has relevency in the EWM packing specifications.
Does this mean that the indicators must be uploaded through the "SUT to Packing Material" transaction (/SCWM/MIG_MAP_SUT)?
What if the Cycle Count Indicator should require a change? Does the change have to be made in ERP and pushed to EWM, do they get updated separately, or is there a way to allow for automatic updating?
I hope the question doesn't seem too complex, but it is the only way I could drill down enough to get what I hope I need.
Thank you!

Hello,
You can do it using MASS TCode.
Regards,
Sathish

Inventory cycle count report

Hi
We need to implement inventory cycle count report . Is there a standard business content data source for this ?
Thanks and Regards
Arun

Sorry I never responded. It's really just a matter of what you need to report on. ISEG has all the basic information you need like plant, material, sloc, etc... so the other tables invovled is really a case by case type of thing. I can't think of much else you would really need for generic cycle count reporting.
Also, the previous post is a good method depending on your needs. If showing difference postings and whatnot is suitable, then go with the movement type. But if you need to dig deeper into it by showing system/counted quantities as well as the difference, then the custom extractor would be the way to go. For me, I did inventory accuracy/cycle counting type of reporting that needed to consider the actual quantities, as a difference of 2 units on an inventory of 100,000 units is a lot different that 2 units difference on a balance of 100 units. But that was just my case is all.
Hope this helps.
Thanks

Cycle counting happening not beyond fiscal year

Hello
We tried to run Cycle counting using LX26 but got error as IM settings are not done,we ran MIBC
The issue here is we can't push the counting date beyond the fiscal year end. If I run the transaction LX26 in either QAS or Prod it will work just fine if I keep the date before 31.03.2012.
Result of this issue is that all parts classified as C or D, are not being suggested for counting. As most of our stock is rated C or D by the ABC analysis that means that a lot of parts will not be counted, while they should be counted.
So what I need is a way to be able to count all types of stock using an inventory process in SAP, if there is another transaction that does count C and D classified stock that would be very helpful.
Factory calendar validdity is from 1996 to 2020.
Transactions I use now:
        For creating inventory documents LX26
        Printing inventory documents ZLI04
        Inputting count results LI11N
        Processing count results LI14, LI20 and ZLI21
Thanks in advance for helping us
Bheema

simha lakkoor wrote:
Hello
> Thanks for your answer but we have maintained AB C D indicators for the plant (xxxx) in the OMCO screen with no of physical inventories,interval,float time etc
> What more we need to maintain. please revert back with your suggestions.
> Regards
> Bheema
Why a setting in OMCO without intervals? complete the customizing according to SAP design, your cusotmizing is incomplete

Status field in Cycle count

Hi all,
Is it possible to involve the "status field" of the meterial in Cycle count procvess. Here the client need is to count the material at material status level.
If this possible, please let me know the t-codes / Process flow.
thanks & regards
Chaitanya Rayaprolu

Explain what your status is and what it controls, and where you maintain it.
In general SAP materials can have material statuses to control business.
However these statuses are not visible in a phyiscal inventory document or in its selection screen.
you have to modify screens, programs and forms to make such status visible for physical inventory.

What is 'Cycle Count'?

Similar Messages

Maybe you are looking for