What is default user and password for Single Sign On

When I try to run a test.rdf report (that comes for demonstration purpose). A page appears which asks form SSO user and password.<br>
I tried all user IDs and password that I have used so for during installation. But none works. Please give me hint about it.

Hi,
If you would like to turn off the SSO for Reports, you can edit the Reports server's .conf file. For some reason, Oracle enabled SSO by default for Reports.
You can access this file through OEM, or you can hand-edit it. It is located at ORACLE_HOME\reports\conf\<rep_server_name>.conf. (Make a back-up first just in case).
Scroll down about a third of the file until you locate the <security>. . .</security> section.
Delete this section, save the file (and run dcmctl updateconfig if you hand-edited the file), and restart the OC4J_BI_Forms instance.
You will no longer get the SSO sign-in page when you run a report.
HTH,
Jim

Similar Messages

  • What is the ir3245 default user and password for the web interface?

    I want to access our ir3245 via web interface ... need to try the default name/password.  If that doesn't
    work I need to know how to reset it to factory default so that it will work.
    Thanks for your help.
    Richard

    Hi Richard, thanks for posting.  Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you!  If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.

  • What is the default username and password for a Airport Time Capsule 3TB

    What is the default username and password for a Airport Time Capsule 3TB

    There is no default user name on any of the AirPort routers, but the default password is......
    public

  • What is the default username and password for SR520

    What is the default username and password for SR520.
    Thanks

    The default username is admin. The default password is admin. Some good info on (lab 7A):
    https://supportforums.cisco.com/docs/DOC-9646
    Marcos Hernandez
    Technical Marketing Engineer
    Cisco Systems, Inc.

  • What is the default username and password for administer​ing my f4500 deskjet printer?

    I need to administer my F4500 Deskjet through my web browser, but do not know the username and password.  I presume there is a way to default the settings, but I need to know the defaults.  Please provide the default username and password for web access.
    Thanks.

    The default username is Admin, but the password is blank by default.  Somehow, a password was added at some point.
    You can try going to the EWS and going to Settings and looking for a password reset option in the Administrator Settings section.  If it is there, it will be the only way I know of clearing the password on this particular printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Default Username and Password for Sample Packages

    Hello,
    What is the default username and password for sample packages mentioned in this article for all the sample packaged applications?
    http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#PACKAGED
    Regards
    Edited by: user20090209 on May 19, 2010 1:37 PM

    Hi,
    Try same user name and password as you login to your workspace.
    Most of applications use Application Express authentication
    Br,Jari
    Edited by: jarola on May 19, 2010 9:06 AM
    And when you have downloaded and installed application to your workspace, you can always change authentication

  • Default username and password for BPEL Console

    What is the default username and password for BPEL Console?

    Hi,
    can you provide the version which you have installed?
    10.1.3 / 10.1.2?
    Advanced installation?
    oc4jadmin or bpeladmin as user
    welcome or welcome1 as password (i do not remember exactly)

  • Default username and password for  newly created client in minisap

    Hi all,
              I am using the free SAP minisap provided by SAP. In this system i tried to create a user from tcode scc4 . when i try to login to the new client with the username SAP* and password minisap i am not able to login. What will be the default username and password for the newly created client in minisap.

    In the new installation
    The parameter
    login/no_automatic_user_sapstar is set to " 1"
    You create the parameter with value "0" & restart application server.
    & Try to login into New client as SAP* with password "pass" - ( For a Standard System) - I don't what will be the default password in minisap.
    Rgds
    PR

  • Default User name & Password for NETWEAVER

    Hi Everybody,
                  I am a Basis Admin in my company working with ABAP Stack installed in my Server.
           Now I have installed Java Stack for Netweaver in a Separate System to Understand the Functionality of Netweaver & its Concept.
         Now the Problem is i am not able to Login Netweaver. I dont know the Default User name & Password for Netweaver after installing it.
        Also, what are the Main features of Netweaver Compare to ABAP Environment
      Could somebody help me to Understand Netweaver and its Default User name & Password to login?
    Thanks,
    Siva

    Hi
    The default asmin user for your Java add in would be J2EE_ADMIN and guest user would be J2EE_GUEST.
    The default password would be the password you provided at the time of installation.
    Regarding information on Netweaver Java, follow link:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/a3bb3eff62847ae10000000a114084/content.htm
    Regards
    Rahul

  • What is initial username and password for AWS instance?

    I have a newly created Media Server on Amazon Web Services. The vm was created from ami-44cd4274.
    The server is running.
    What is, or how do I find, the default username and password for the Administration Console?

    Hi,
    Please refer to this:
    http://forums.adobe.com/docs/DOC-2334
    Hope it helps!
    -Shiven

  • Default username and password for WLC 5508 series

    Hi ,
    please let me know the default username and password for the below  WLC  device
    Model :
    AIR-CT5508-100-K9
    Image : AIR-CT5500-K9-7-0-230-0.aes                
    Regards
    Lerner 

    Password Recovery in WLC versions 5.1 and later
    If you forget your password in WLC version 5.1 and later, you can use the CLI from the serial console of the controller in order to configure a new user name and password.
    After the controller boots up, enter the Restore-Password command at the user prompt. This command is only accepted for the initial user login and becomes disabled after a user logs in. You are prompted to enter a new username/password, which can then be used to log into the controller and modify settings.

  • Default Username and password for CCM DC-Directory Admin

    What is the default username and password for accessing dc directory for callmanager ?
    TIA

    Hi Zufi,
    It should be;
    Log in as Directory Manager. The password by default is ciscocisco.
    Hope this helps!
    Rob
    Please remember to rate helpful posts........

  • User and Password for JMS-Adapter

    Hi all,
    when configuring JMS-Adapter e.g. for IBM MQSeries i do not find field where to specify the user and password for the MQ. We configure e.g. a receiver communication channel.
    In 2.0 JMS-Adapter we can put user and password like this
    JMS.QueueConnectionFactoryImpl.user=YTEST
    JMS.QueueConnectionFactoryImpl.password=<!%YTEST%!>
    in the property file. We can also hide the passwort with
    the mechanism of password token.
    How can this be done in JMS 3.0 Adpater? Is it possible?
    Thanks,
    Ly-Na Phu

    Oh, sorry. Now i see the field for user and passwort.
    Thanks,
    Ly-Na Phu

  • Default username and password for 10g

    hey guys does anyone noe the default username and password for the sql plus? version 10g

    SQL*Plus does not need a username and password. E.g.
    /home/oracle> sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Oct 3 14:31:43 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> prompt Hello World
    Hello World
    SQL>
    Connecting to an Oracle database instance usually requires one to supply Oracle database authentication, e.g. a schema name and password. Unless of course the database uses external authentication in which case you do not need to manually specify an Oracle schema name and password.
    Yes, using SQL*Plus as a client to connect to an Oracle database server typically requires a scheme name and password.
    It is important to understand the difference - SQL*Plus is a CLI (Command Line Interface) client to Oracle. It is not the database. SQL*Plus does not need a username or password to load and use.
    Granted, it is not of much use when not connected to an Oracle instance, but that does not change the point that SQL*Plus itself does not need authentication.

  • What is the default user and password on linksys wrt54gr

    what is the default username and password on my linksys wrt54gr.. i've tried admin and admin and that does'nt work.. any ideas???

    If you have setup the routers bridging into the same LAN (i.e. the LAN-LAN connection and not using the internet port on the second router as I have suggested in the link above) and with the wireless settings you have mentioned you should have a wireless roaming network. Make sure you have SSID broadcast enable on both routers.

Maybe you are looking for

  • Open Other Project - Relative Path

    I hate to keep asking this question ... but has anyone come up with a workable solution for opening another project in Captivate 4 using a relative path? I see this discussion starting and stopping in various places ... but there never seems to be an

  • Best Way to Create a Goods Movement for Goods Receipt & a Stock Transfer?

    This is for an acquisition, so I do not think BAPI_GOODSMVT_CREATE will work because we do not have a doc ref no. We also need to create a Stock Transfer movement. Or we call BDC MIGO and BDC M1B1? There must be a better way. We are on 46C. I am open

  • Variable selections not appearing while executing query

    hi, am using 3 variables in my query all 3 are ready for input, but still when am testing it in another username, the system does'nt give the selection options and the query is executed automatically. 1 of the variables use company as characteristic.

  • I forgot my restriction password

    I forgot my restriction password and I was wondering how to reset it also I have a app that will not let my get back the pro

  • Passing IP routes to VPN clients

    Good day! We've got a fairly plain-vanilla VPN configuration on a C3660 router running IOS 12.3(26) so that our employees can initiate VPN sessions to our office using their Windows or Linux workstations.  In a typical windows L2TP VPN configuration,