What is default UserID/Password for Oracle 11g

Hello experts,
I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
Enterprise Manager Database Control URL - (orcl) :
https://192.168.2.25:1158/em
when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
Thanks a lot in advance.
Edited by: user10791378 on Aug 16, 2009 1:36 PM

>
I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
Enterprise Manager Database Control URL - (orcl) :
https://192.168.2.25:1158/em
when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
>
You can log in to the Enterprise Manager Database Control with any DBA user. Typically, you should be able to logon as sys or as system. The passwords for these two users where specified by you during the install of the database.
If you can't remember them, you should be able to change them on the command line after a connect as sysdba there.
Kind regards
Uwe
http://uhesse.wordpress.com

Similar Messages

Default userid/password for Essbase 7.1.5

Hi All, I've just now upgraded to Essbase 7.1.5. At the time of installation I gave the 'NAME' as 'James Galt' and system password as 'password'. Earlier on every upgrade it used to recognize the old security file and I could login to a fresh upgrade using my old id/password. But this time it does seem to recognize the essbase.sec file. could somebody please let me know the default user-id password for version 7.1.5, so that I can atleast login and try creating some users. Any help in this matter s highly appreciated. Thanks in advance, [email protected]

There's no such ting as a default user ID and password for Essbase. The system user ID and password is the one you create when you install Essbase. IF you want to reset and start from scratch, delete the essbase.sec file and launch essbase.exe from \essbase\bin. You will be prompted to enter a new user ID and password. Hint : it's not good practive to use someone's name as the system ID. BE aware of a couple of things if you do this, any users, filters, applications, etc you had we'll be gone and have to be re-created. If this was an upgrade from the previous version, upon install completion, you would run the essbase.exe and it would prompt you for the existing password. If it's not working, chances are you are using the wrong password. Remember, the system password might not be the same as the admin password. For instance at my location, when I did the upgrade I entered the admin password and it didn't work. I asked everyone and they said that was the only password. After digging little deeper I found that a couple of years ago it was determined the passwords were too generic so they changed them. While they changed the admin password, the system password stayed the same. After digging, I found out what the old password was and sure enough I was able to fire it up. If you don't have existing apps and users to worry about then just start fresh, but if you want to salvage what you had, then you will need to find the right password. One more thing, if you have Essbase running as a service, disable the service and run it in console mode until you get this straightened out. HTH

What is the default password for weblogic 11G for EPM 11.1.2

HI All,
Just need to know the default user name and password for weblogic 11G for EPM 11.1.2.
At the time of installation I have kept the default user name epm_admin and a password... but its not accepting that user name and password.
Any help on the above?

On my painfully new 11.1.2 install, and per the install instructions, the username and password are as follows:
epm_admin
whatever you set up -- (As I only ever use one of three different ones when I do installs, it wasn't too hard to go through all of the possibilities)
See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/frameset.htm?webLogicDomainName.html
Regards,
Cameron Lackpour
Edited by: CL on Aug 3, 2010 11:14 AM

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

Optimal NTFS block size for Oracle 11G on Windows 2008 R2 (OLTP)

Hi All,
We are currently setting up an Oracle 11G instance on a Windows 2008 R2 server and were looking to see if there was an optimal NTFS block size. I've read the following: http://docs.oracle.com/cd/E11882_01/win.112/e10845/specs.htm
But it only mentioned the block sizes that can be used (2k - 16k). And basically what i got out of it, was the different block szes affect the max # of database files possible for each database.
Is there an optimal NTFS block size for Oracle 11G OLTP system on Windows?
Thanks in advance

Is there an optimal NTFS block size for Oracle 11G OLTP system on Windows?ideally FS block size should be equal to Oracle tablespace block size.
or at least be N times less than Oracle block size.
For example - if Oracle BS=8K then NTFS BS better to be 8K but also can be 4K or 2K.
Also both must be 1 to N times of Disk sector size. Older disks had sectors 512 bytes.
Contemporary HDDs have internal sector size 4K. Usually.

Chang system userid/password for another server instance

It it possible to change the system userid/password for another server
instance. If so , how ?
I would like to allow certain groups to be able to start and stop ONLY their
server without giving out the system account.
Thanks in advance!

the relationship between the infrastructure nodes and the application server nodes is a one to many relationship. The infrastructure home should be the only home that the EMWebsite service has been started for.
the user to log in to em console is ias_admin/<password> if it does not accept the password that you set for this user then try it with caps lock on as you may have had it one when setting the password.
As 9ias release 2 has been designed with a multiple machine install in mind, if you install more than one instance (multiple oracle homes) on the server then you will end up with multiple apache processes and oc4j processes. This means you will be able to connect to 2 apache server homepages under different ports. That is why you get the same page.

Bandwidth requirec for Oracle 11g ADF application

Hi
What is the idel bandwidth recomend for oracle 11g ADF web application .

Can't be answered without knowledge of the app you are talking about.
100 user doesn't mean they are all active at once and even if they are it depends on how much data your app processes. This can't be answered from out point of view.
So your task is to find out how many users are doing what at a given time interval and then find out how much data is processed (there are plenty of tools available to measure this).
How a bout a test run with e.g. 10 users doing normal work with our app, measure the amount of data and calculate the bandwidth from there. Don't forget to take service level agreements (e.g. a page has to be submitted in x seconds) into your calculations.
Timo

Would like to write OCA exam for Oracle 11G, Need Help ?

Hi Team,
I would like to write OCA exam for Oracle 11g, I am a SQL/PLSQL developer and could you please guide me what are the exams needs to take.
Please provide me links and materials inorder to know the exam details/model paper.
Thanks in advance............
Thanks
Raghavendra Setty S
[email address removed by moderator for security purposes]
Edited by: Certification Forum Moderator on May 16, 2012 4:12 AM

Hi Raghavendra, welcome to the forum!
I suggest you remove you email from your post to avoid recieveing undesired emails.
There are two OCA paths, OCA Developer or OCA DBA.
For both paths you need to take one of the following SQL exams:
1z0-007 Introduction to Oracle9i SQL (this is an outdated exam)
or
1z0-047 Oracle Database SQL Expert (more advanced exam recommended for developers/dbas with SQL experience)
or
1z0-051 Oracle Database 11g: SQL Fundamentals I (recommended for beginners or people with average experience in SQL)
After passing one of these exams, if you want to take the OCA DBA path you need to do the:
1z0-052 Administration I exam
After passing one of the SQL exams, if you want to take the OCA Developer path you need one of the:
1z0-147 Program with PL/SQL (outdated exam)
or
1z0-144 Oracle Database 11g: Program with PL/SQL (more actual exam, recommended)
For information on specific exams:
1z0-007: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_007
1z0-047: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_047
1z0-051: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_051
1z0-052: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_052
1z0-147: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_147
1z0-144: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_144
For information on the OCA Developer path:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:PLSQL
For information on the OCA DBA path:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:Datab11g

Password for Oracle user , sys , system , saprpd

Hi All ,
I just join a new company as sys admin . I tried to search password for Oracle user sys , system and saprd in my company password file . Those users password are not stored.
Am I supposed to know those oracle user password ? If yes , Can I find them in my Unix system or sap application ?
Please help !
Felix

It is not possible to determine the passwords if you don't know them. But perhaps note 562863 and the described default passwords are useful. Furthermore you can always change passwords if you have SYSDBA privilege using "alter user ... identified by ..." or "brconnect -f chpass".
Regards
Martin

Dynamic UserID/Password for file Adapter

Hi,
How to use dynamic UserId/Password for file adapter ?
(Sender/Receiver)
In our case the Id/Pwd of FTP Site changes freguently.
Can anyone help.
Thanks in Advance
Regards
Chemmanz

Hi Chemmanz,
>>>>In our case the Id/Pwd of FTP Site changes freguently.
but do you have those passwords in the message payload?
if not then you will still have to fill it somewhere right?
BTW
the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
but this is not possible in standard I believe
Regards,
michal

Procedure for creating logical standyby database for oracle 11g?

Hi all,
can anybody provide me docs /procedure for creating logical standby databse for oracle 11g standard edition.
Aravind

Aravind,
1. The Oracle Standard Edition does not have standby mechanism, you should do it manually or go for Enterprise Edition.
2. It's rather a question for General Database Discussions instead of Peoplesoft.
Any further question regarding that point, please post out there.
Nicolas.

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

/lib32 folder required for Oracle 11g on Linux 32 bit

Hi,
I have 64 bit linux and Oracle 11g installed but one of my applications is using 32-bit libraries.
So i am thinking of copying the lib32 folder in ORACLE_HOME and paste the path in LD_LIBRARY_PATH.
Will it work or not????
If YES, i need the lib32 folder for Oracle 11g R2 on Linux 32 bit. Can someone please tell me from where can i download it?

Hi;
In addition to Srini, I suggest to review:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
Regard
Helios

Development tool for oracle 11g R1

hi all .. can someone plz guide me which dev tool can i use for oracle 11g R1? i want form builder and report builder for this. (i have been using oracle 9i with for builder 6i)

kashif_ashfaq wrote:
hi all .. can someone plz guide me which dev tool can i use for oracle 11g R1? i want form builder and report builder for this. (i have been using oracle 9i with for builder 6i)You need to use [Oracle Developer Suite 10g|http://www.oracle.com/technology/software/products/ids/index.html]

Username and password for oracle financials

Hi,
Can anyone help me in finding out the username and password for oracle financials application.
Thanks in advance
Jaya

Many Applications users are predefined in the Vision Demo database. The following username/password pairs have System Administrator responsibility:
- SYSADMIN/sysadmin
- MFG/welcome
- OPERATIONS/welcome
- SERVICES/welcome
- MRC/welcome
- HRMS/welcome
If you have a fresh database, you can try SYSADMIN and/or OPERATIONS account.
All application users are defined in FND_USER table.

What is default UserID/Password for Oracle 11g

Similar Messages

Maybe you are looking for