WHAT IS DELTA JOB IN BODS ?? WHERE WE USE DELTA JOBS ??

There is no 'Delta Job' object in Dataservices, In any ETL tool if you are loading data in incremental way based on certain conditions (Ex: Extract only yesterday's changed data and load), then its a Delta load, the Job which does this, you may call Delta Job.
Please don't use ALL CAPS, its like yelling in forum

Similar Messages

What is info type 1957 and where its used?

What is info type 1957 and where its used?

I have used this infotype.
check out this link
P1957 Infotype 1957 - Obsolete, DO NOT USE - SAP Structure - ABAP

Oracle BI what is cubes and dimention and where we use cubes and dimention

Dear ,
I am working on Oracle BI.
what is cubes and dimentionS and where we use cubes and dimention
Please give a link where i get stuff regarding cubes and dimentions.
thanks

Possibly you are lost in the wrong forum category ...
Post your query in:
Hyperion EPM

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

What is performance optimizaion in bods ?? where we use ??

what is performance optimizaion in bods ?? where we use ??

Dear
for increasing performance in BODS
Some tips for fine tuning the BODS job for faster and efficient executions with optimal resource utilizations.
Regards

How to tell what methods where not used in the code?

Hi there,
I wonder if there's a way to check what method are not used in the execution code (void main).
Example:
in the code below, the following method where not used:
setAge, getAge, getName,setName, addFeedback
public class Test
     public static void main(String args[])
          Employee empl = new Employee("John", 54);
          System.out.println(empl.getDeatils());
public class Employee
     private int age;
     private String name;
     public Employee(String name, int age)
          this.name=name;
          this.age=age;
     public String getDeatils()
          return name+" ("+age+")";
     public void addFeedback()
          //do something here.
     public int getAge()
          return age;
     public void setAge(int age)
          this.age = age;
     public String getName()
          return name;
     public void setName(String name)
          this.name = name;
}

Yucca wrote:
georgemc wrote:
Yucca wrote:
Sound like you should visit the logging API or you could do SOP all over your code which would make it very unreadableI don't see why logging code will make his code any less messy than SOP everywhere. Unless you're talking about applying logging by AOP, which is equally messy in a different way.I never implied that the one was tidier than the other. O merely recommended my knowledge on how to help the OP and gave 2 choices. Oh right. It looked like you were suggesting SOP was messier somehow. Never mind, then.
Besides is AOP really that bad when using Interceptors? I know that this is new to Java but interceptors are really not that untidy.I didn't say they were untidy. I didn't say there was anything wrong with AOP. But logging by AOP results in pretty useless, messy logs. "This method was called with these parameters" all over the place, rather than something nice and friendly. Remember, logging is more often read by support staff than developers, so while it might be obvious to you what "getLlama(200, 3)" means, it's probably garbage to the support bods.

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

Move iTunes from PC to MAC, http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

What is the use of delta in BW side when we have delta in R/3

Hi,
what is the use of delta in BW side when we are already using delta in R/3 side?
Like,
Generic extraction:-
with different delta extractions (Time stamp, Calendar day, Numeric pointer).
Lo-Cockpit extraction with change log method.
Co/Pa extraction with time stamp method.
So from this delta activation first time full data will be loaded and after that only changed data will be loaded because of these deltas in R/3 side.
So now my question is what is the exact use of delta in BW side with ODS/DSO because data already reached to BW with delta activation right.
Can you please explain me what is the exact use of BW delta?
Thanks in advance.
Points to be added.
Regards,
Shyam.

The purpose of Delta Queue is same in R/3 and BW.
In BW, Delta Queue is used to capture changes made to objects within BW. (for Eg: BW Statastics)or Update data from one BW system to another BW system (if you have multiple BW systems).
Message was edited by:
Praveen Vujjini

What is joins?where we use it. is it DD concept? abap

hi abapers,
what is joins?where we use it. is it DD concept?
regards,
anjan

hi srinivas.
chk this simple example.
u will get good idea.
table emp
empno name
a sasi
b xxx
c yyy
table sal
empno salary
a 1000
b 2000
Inner join
select eempno ename
s~sal
into table int_table
from emp as e
inner join sal
on
eempno = sempno.
if you made inner join between table a and b by emp no
the selection retrives only if the condition satisfy the output will be
a sasi 1000
b xxx 2000
Outer join
select eempno ename
s~sal into table int_table
from emp as e
LEFT OUTER JOIN sal
on
eempno = sempno.
if you made outer join (left /right ) the left table kept as it is the
if the condition satisfy the right table entries will fetch else leave it blank
the output will be
a sasi a 1000
b xxx b 2000
c yyy
rgds
anver
if helped mark points

What RAM do I need and where can I get it from?

Hi all,
I know this is probably a simple question, but I just want to make sure I don't mess up my computer! I have an old school DV iMac, and bought the Mac OS X upgrade not too long after it came out (which is rather a while ago now!), but couldn't install it became I don't have enough RAM. And I obviously have just put it off and off. Now I'm at uni, and want the computer to work as well as it can for my mum, because she's even worse than me when it comes to computers. So, anyway, I need RAM. What type do I need and where can I get it from fairly cheaply? And how much would you recommend I get? My friend says he knows how to put it in, so all okay there hopefully/
My computer's details:
Processor info: PowerPC G3
Machine speed: 400MHz
OS: 9.2.2
Built-in memory: 64MB
I remember being able to get more details than this from somewhere on the computer, but I can't remember where...I haven't used it for 6 months or something, and am obviously getting forgetful.
Hope someone can help. If you need to know anything else, tell me where to get the info from and I will tell you!
Cheers,
Fran
DV iMac Mac OS 9.2.x It's lime green...ooh...

Hi,
I just bought some RAM from Crucial.
If you go to www.crucial.com/uk and follow the Crucial Memory Advisor Tool, you should be able to find the RAM for your Mac.
1 GB sticks are pretty good value at the moment (they've even gone down a few pounds since I bought mine a week ago) and if you enter this code (found it on aonther thread here) you might get a couple of pounds knocked off the total: CUSTOMPC
There's also places like Kingston & Cancom to try, as well as Misco.co.uk. But Crucial select the recommended RAM for your Mac.
Also, when you think you've found the right RAM and want to buy it, try the Apple agent chat, and double-check with them.
Hope this is useful.

Where are device export jobs managed?

I created a scheduled device export job from the CS/Device Management/Device summary page to run daily and create a csv file. This ran fine for several months, but then seemed to stop. I think we had an issue with the jrm process, long since resolved. During that time I created another scheduled export job. I think they are now conflicting with each other (export to the same file name). I was hoping to delete one of them, but am unable to determine where they are stored. Just for a test I created a third job, noted the jobID, but can't find that one either. They don't seem to be listed in the RME job browser. Where are these stored and how do I delete the extraneous jobs?
Perhaps a related issue. When go to the System View of CW, there is a panel named Job Information Status. It always contains only the string 'Loading....' in red (along with Log Space Usage and Critical Message Window). Thoughts?.

My guess is you have a lot of jobs on this system, and jrm is not returning fast enough. I find that Firefox is a bit more tolerant to delays than IE. If you can, try FF, and see if the job browser loads. If so, purge some old jobs.
Posted from my mobile device.

What is Field Label ? and where do we use it .

What is Field Label ? and where do we use it .

Hi,
You can assign text information to a data element with the field labels.
The field labels are used to display a screen field. You can copy structure components and table fields from the ABAP Dictionary to the input template when you define a screen in the Screen Painter (Get from Dict. function). You can also assign a field a field label that is derived from the data element of the field.
The text of the field label can be translated centrally with the translation tools. The text is then displayed in the input template in the users logon language.
Short, Medium and Long Field Labels
Keywords of different lengths for identifying screen fields. Since the space available for such texts depends on the input template, you can define the text information in three different lengths.
A maximum length must be assigned for each field label. It is the upper limit for the lengths of all translations of the given text. The maximum length of the field label therefore should be somewhat longer than the given text in the original language.
Headers
This text is used as a column header when you output the contents of fields as a list in the Data Browser. It can also be assigned to a field in the Screen Painter.
A maximum length must also be assigned for the header. It is the upper limit for the lengths of all translations of the header. Choose the maximum length of the header to be somewhat longer than the given text in the original language. Also note that the header is often displayed above the corresponding column when preparing list output. The length of the header therefore should not exceed the length of the data element.
Short Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Medium Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Long Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Heading
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Thanks,
Reward If Helpful.

What is a PUK code and where do you find yours for your phone

What is a PUK code and where do you find yours

Log on to Verizon wireless and under your account after logging in, look at the device in question and it shows there. It stands for Phone Unlock Code
Good Luck
Message was edited by: Elector

I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help?

I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help? I really don't want anyone ready what I get from other people, its emrassing, when I get a text from someone and it's personal, and someone could go look at my phone while its charging and read the message. Please help!!!! How do I disable it, If I can.

Hello KenyaJohn,
You may benefit from disabling Show on Lock Screen for Messages and Mail in Settings -> Notification Center -> Mail/Messages.
You can disable Show on Lock Screen for a particular app in Settings > Notification Center > <app name>.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Cheers,
Allen

WHAT IS DELTA JOB IN BODS ?? WHERE WE USE DELTA JOBS ??

Similar Messages

Maybe you are looking for