What is difference between additive delta and new status for change record

Hi Experts
Can any one explain me about the difference between additive delta and new status for change record with example
if any one has a document please post it iam thank full to u
Please search the forum before posting a thread
Edited by: Pravender on Feb 12, 2012 1:54 PM

Additive delta --- We will get the changed quantity.
say suppose you have sales order and quantity like  1111   30 which is loaded to cube(BW).
now same record qty has changed from 30 to 40. As we have additive delta, we will get new record as 1111  10.
new status for change record: This is same as like After image delta type in standard SAP data sources. for every change in record you should have new record.
say if you have any number which will be generated by system for new/changed record, then you can use this.
You can use this option when delta option set to "numeric pointer"

Similar Messages

  • New status for changed records or Additive Delta

    Hi Guys,
    I have a design question for ODS and Extractor.
    The requirement is as follows...
    There is a table in CRM with service point as primary key. The fields in the table for example are bill account and Meter ID. Key figure is a XYZ value. In CRM for that Bill account Meter ID combination the XYZ value will change every year. In CRM the same record is being updated with changed value of XYZ. But in BW when the delta is being sent I do not want it to update the existing record but add it as  a new record. This way the history can be tracked for previous years XYZ value.
    What is required to make this happen?
    When creating the extractor I think I should give the delta as new status or additive delta?
    What should I indicate as delta specified field?
    For the ODS ( I am on BI 7.0) should I create the normal ODS or should I create the write Optimized or something for this requirement ( I dont remember right now the 3 types of ODS we can create).
    Your inputs will be greatly appreciated.

    Thanks Puneet!
    Good Answer.
    New and Changed records does help in getting the records as desired.
    But the problem is while loading into BW I cannot create a new record. The primary key is only Service Point. So even if the key figures and dates associated with that record changes, BW will still update my existing record.
    Is there a possibility of using the dates as a pointer that a new record should be created.
    Let me explain it better. Following is the structure of table.
    Service Point (primary key)
    Product GUID (key in CRM)
    Circuit ID
    Installation date
    Effective date
    Termination date
    CRC (some key figure)
    Scenario is - This year Service Point A with CRC value as 50 with effective and termination date for example .. May1 2009 - Apr 31 2010.
    Service Point   CRC   EffectiveDate   TerminationDate
    A                     50      5/1/2009         4/31/2010
    Next year the same service point will have different values and CRM system will update the record in CRM table.
    Service Point   CRC   EffectiveDate   TerminationDate
    A                     60      5/1/2010         4/31/2011
    1) So I was wondering if there is a way or some code can be written to check if effective and termination dates are not same it should be added to ODS as a new record.
    2) Another way is to make some sort of Time dependency. Like use Valid From and Valid To dates to track the changes to the record and display all the different values for every record when the CRC values were valid between what dates.
    3) or some other way you can suggest

  • What is difference between UNIX file and DOS file for SAX parser?

    i have the following XML file:
    <?xml version='1.0' encoding='utf-8'?>
    data on
    multiple lines]]></strTask>
    If i save it as Unix file, than SAX parser works correctly and characters() function works only once per strTask tag.
    But if i save the file in DOS mode, then SAX calls characters() function every time new line is encountered during the same strTask tag.
    what can be a clue?

    i have the following XML file:
    <?xml version='1.0' encoding='utf-8'?>
    data on
    multiple lines]]></strTask>
    If i save it as Unix file, than SAX parser works
    correctly and characters() function works only once
    per strTask tag.
    But if i save the file in DOS mode, then SAX calls
    characters() function every time new line is
    encountered during the same strTask tag.
    what can be a clue?

  • Diff between additive delt and delta

    Hi all,
    what is the difference between additive delta and delta?

    the records which are generated after the last update is called delta.
    In some datasources the changed records are stored with before and after images.
    But some datasoures the changed records are stored with only new image we call it as additive delta.

  • What is difference between bex analyser and bex browser

    what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

    Bex Browser
    The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
    Document types that you can work with in the BEx Browser are:
    · BW workbooks
    · Documents that are stored in the Business Document Service (BDS)
    · Links (references to file system, shortcuts)
    · Links to internet sites (URLs)
    · SAP transaction calls.
    · Web applications and Web templates
    · Crystal Reports
    Bex Analyser
    The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
    You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
    Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
    You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
    Overview of the Functional Area of the BEx Analyzer:
    ·        BEx toolbar
    You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
    ·        Evaluating Query Data
    The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
    Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
    ·        Queries in Workbooks
    Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
    When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
    You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
    ·        Precalculating workbooks
    You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
    To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
    You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
    Hope this will solve your issu

  • What is difference between BP monitor and supplier monitor?

    hi friends
    what is difference between BP monitor and Supplier Monitor
    what is tcode for BPmonitor

    Hi Vinny,
    Please refer to the following links. These seems useful:
    The specified item was not found.
    New Business Process Monitoring functionalities in SAP Solution Manager – ALE / IDoc Monitoring

  • What is difference between SAP R3 And SAP IS Mills Product

    HI Friends
    What is difference between SAP R3 And SAP IS Mills Product
    What are the futures are availables in IS MIlls

    SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
    Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
    The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
    These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
    To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle – from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.

  • What is difference between u2018credit exposureu2019 and u2018credit limitu2019?

    What is difference between u2018credit exposureu2019 and u2018credit limitu2019?
    What transaction I can used for to see these tow information?
    best regard

    Credit exposure is total AR and open sales values.  Credit limit is used for block sales documents if the total exposure will exceed the credit limit. For Example:
      Credit Limit : 600
       Open AR ( Customer Balance) : 100
       Customer Open Orders (Order Quantity have been confirmed, but no delivery document is created) : 100
       Open Delivery (Delivery has been created, but no billing ) : 100
       Open Billing (Billing is created, but has not release to Financial Accounting): 100
    So far, the credit exposure is  400. If a new sales order is coming with value of 260, the sales order will be blocked, but the credit exposure is still 400.
    Then if someone release the new sales order , then the credit exposure is 660.
    Hope this is useful for you.
    Flex Yang

  • What is difference between report programming and dialog programming?

    what is difference between report programming and dialog programming? plz provide some example code

    ABAP programming
    Basically reports are used to read database and represent the results in lists.
    Reports are collections of processing blocks that the system calls depending on events.
    We can use reports to evaluate data from database tables.
    Reports are stand alone programs and controlled by events.
    A report itself never creates events
    steps in report:
    Processing the selection screen
    Reading the database
    Evaluating the data and creating lists
    Outputting a list.
    1st u write simple logics, after that u can enhance the code as step by step.
    Dialog Programming
    Structure of a Dialog Program
    A dialog program consists of the following basic components:
    Screens (dynpros)
    Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
    The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
    ABAP/4 module pool
    Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
    All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
    Check this link for basics.
    Check this link for Dialog Programming/Table Control
    Check this SAP Help for Dialog Program doc.
    Check this SAP Help link for Subscreens.
    Check this link for subscreen demo program.
    Also check this link too.

  • What is difference between interactive list and interactive reports?

    what is difference between interactive list and interactive reports?

    hi check this..
    interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
    report .
    write:/ 'this is the source list'.
    at line-selection .
    if sy-lsind = 1 .
    write:/ ' this is the 1st list'.
    if sy-lsind = 2 .
    write:/ ' this is the 2 list'.
    if sy-lsind = 3 .
    write:/ ' this is the 3 list'.
    if sy-lsind = 4 .
    write:/ ' this is the 4 list'.
    if sy-lsind = 5 .
    write:/ ' this is the 5 list'.
    if sy-lsind = 6 .
    write:/ ' this is the 6 list'.
    if sy-lsind = 7 .
    write:/ ' this is the 7 list'.
    if sy-lsind = 8.
    write:/ ' this is the 8 list'.
    if sy-lsind = 9 .
    write:/ ' this is the 9 list'.
    if sy-lsind = 10 .
    write:/ ' this is the 10 list'.

  • What's difference between iphone 4 and 4s?

    i bought an iphone 4 9months ago and the software was upgraded to iOS5 last month. since then i noticed that by the time i used to connect my iphone into my pc the itunes did not sync so i'd just tolerate as not a big deal for me... this is the problem that i have. yesterday evening, my iphone 4 was connected to my pc at the same downloading viber again from itunes at the moment i wanted to disconnect my iphone its dead! shut it off. i kept on switching evry10sec but there was no power. i knew there's enough battery as it connected in my pc. well, i gave up and leave it but 36hrs after when i'd tried again to switch on i saw on the lcd battery icon is red So i've charged immediately. now fine! i just want to share with you this experience... why its like this. Thanks there.

    what's difference between iphone 4 and 4s?
    Go here and see what's new:  http://www.apple.com/iphone/

  • What are differences between nokia N95 8gb new upd...

    what are differences between nokia N95 8gb new update V20 and previous update V15 and what are the bugs in new update V20??

    Does your search not work?

  • Difference between Special GL and New GL

    Dear SAP Gurus,
                            What is the difference between Special GL and New GL?
    Thanks & Regards,

    Dear Sim
    If I understood logically, then your question actually refer to special purpose ledger, right ?
    If so both are almost same. Both are for you to depict parallel accounting in your SAP system by storing posting data for the various accounting principles in separate ledgers.
    Whereas special purpose ledger is more custome developed (data is stored in 'Z' table), whereas New GL is more standardised from SAP as well as advanced when compared to special purpose ledger.
    Hope I understood correctly your question and gave some useful input.

  • What is difference between sy-tabix and sy-index.

    SAP Seniors,
    Can you please let me know what is difference between sy-index and sy-tabix.
    I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
    Thank you

        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    award points

Maybe you are looking for

  • I don't understand why Symbian has been killed off...

    I recently posted my impressions of the 808 http://forums.guru3d.com/showthread.php?t=374416 and it has it's problems which means I will not be keeping the phone for very long. However if Nokia continued with Symbian which has far more potential than

  • Library Sharing question

    Hi I am not even sure if this is possible I have a desktop PC (Vista & iTunes 8) and all my music is on an external 250gb hd. I have successfully managed to share this library with my laptop (again Vista & iTunes 8)over my wireless network. None of t

  • How to design a GUI Python app properly?

    Hi guys. As motivation to actually learn Python, I want to carry out a fairly simple application that's been brewing in my head for months; a "game manager" that a gamer can use to keep track of the games he owns, the games he's beaten, and any speci

  • Sharing to flickr doesn't push the metadata of modified photos

    In iPhoto 09, we can share photo on flickr. There is a very annoying problem though. If a photo has been modified in iPhoto, the metadata is lost (well, it's not lost really, since it's kept in a database outside of the file) but the file correspondi

  • Hi, I am using GPS receiver, Gyroscope, an

    d odometer. My question How can connect these 3 sensors to COM1? Also, I need to take the GPS time every 1 sec and put this time to the odometer and Gyroscope output? By the way, records from Odometer and Gyroscope every 0.1 sec. Thanks in advance, M