WhAT Is distributing the model
Hi All
Can anybdy plzz explain me what do we mean when we say we distribute the distr model in bd64?
Hi
The distribution model describes the ALE message flows between logical systems.
<b>Use</b>
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
<b>Structure</b>
In the distribution model you can specify the messages to be sent to a given logical system. You can also define the conditions for the content and dispatch of messages in the filters.
The distribution model consists of one or more views that you can define. With more complex distribution tasks you can assign business sub-areas or groups of logical systems to separate views.
The relevant views of the distribution model must be available in all the logical systems involved in ALE. You can find the functions for distributing views in Customizing for ALE.
Hope this helps.
Regards
Sumit Jain
**Reward with poitns if useful
Similar Messages
-
IDoc to IDoc scenario: distribute the model view
Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfuly created a message type and generated the model view in tcode BD64.
Question:
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
When I choose the receiver system ERP:200 and get the following error
Target system: ERP:200
Model view ECCCLNT100 has not been updated
Reason: Distribution model is currently being processed
When I try to choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Is that an error? If yes, how can I fix them?
Thank you very much
ThomHi
Look my reply on this thread regarding SYNC Message Type.
Re: problem while distribute model view
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI. -
Error - Distributing the Model using BD64
Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.you have to distribute the distribution model in its new version
-
Error in Distributing the model view
Hi,
I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
I am trying to set up the ALE customizing and distribute the model view.
I have created RFC from 600 to 610 and the test connection is fine.
I have created a model view in which i have given sender system as LS_600 and
receiver system as LS_610 and the message type as MATMAS.
In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
i have given a port which uses the RFC to 610.
When i have tried to distribute the model view it is giving error as
'communication error occured. Username or password is not correct (Repeat Registration).'
I am not able to figure out the error.
There is also a partner profile as ls_600. Do i have to
make any changes there ?
Do i have to do something in the client 610 ?
Your help is highly appreciated.
Thanks,Hi Prasad,
Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
And let me know if you are able to distribute the IDoc or not.
If you get the error. Please let me know the error.
Regards,
Krishna -
Unable to distribute the MODEL to backend system in SRM 5.0
Hello Experts,
I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
Target system T90CLNT090 Commnunication error occurred, error when opening an RFC connection
RFC connections are
T90CLNT090 - SRM to R3
SRM_00_800 - R3 to SRM
Systems got connected successfully and I can "Remote Logon" too......
My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
Rgds !
SAP NoviceHi Zuljana,
Kindly check if your partner profile is active. (Indicated by 'A')
Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
Regards,
Nikhil
Edited by: Pbponikhil on Dec 21, 2010 4:11 PM -
Error while distributing the model
Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanksHi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered> -
Prob in distributing the model
Hi
Being done with the initial steps, I created the distribution model
When i distribute that , i get the error stating "Communication error , function xxxxxxxxxx is not available".
Due to what reson this error could be? Kindly elaborate .
ThanksHi,
1.Check in the SM59.That error due to the RFC destination is not correctly assigned.
2.Check both sides in outbound and inbound.
Regards,
Kumar(Reward if helpful). -
Not able to distribute the model
Hi
I created a model using BD64 according to the procedure to the best of my knowledge. But i am getting the following error
"Model view has not been updated. Reason: the distribution model is currntly being processed."
Nobody else are logged in. Can anybody say what the prob might be and how can that be solvedhi
check this link
[Re: getting problem while creating the dist model in bd64|Re: getting problem while creating the dist model in bd64]
Thanks& Regards
Nagesh.Paruchuri -
Error in distributing the Model View in BD64
Hi Experts,
I have some problem in distributing model view in BD64. please see here the error details:
Model view <logical client> has not been updated
Reason: No authorization to create model view <logical client>
.....authorization object B_ALE_MODL
.....Parameter: activity 01, model view <logical client>
i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
Please help.
Thank you,
TonyHi Experts,
In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
Edited by: Tony on Aug 3, 2011 4:30 AM -
I've gone through the steps to create a model view, message types and generate the partner profiles in my SRM system. When i try to distribute the model to the backend, I get the follwing error:
Model view XXX has not been updated
Reason: No authorization to create model view XXX
..... authorization object B_ALE_MODL
..... Parameter: activity 01 , model view XXX
Can anyone tell me what that means?
Thanks,
SNHi ,
It means that your ALE user that is used to connect to the backend does not have all the authorization required to replciate the ALE model.
B_ALE_MODL is missing.
Please add this object to the ALE user and test again.
Kind regards,
Yann -
Related to distribution the model view
hi
When we try to distribute the model view, we get an error 'Model View has not been updated. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
What is being referred to as the maintenance system here? Are we missing out on something?Are you created distribution model for the correct Logical systems. Check it once.
-
Error while distributing customer model
hi,
i am getting the following error when i am trying to send data between two R/3 systems using distribution model
i am unable to distribute the model to the other system
Error:
"Target system is an external System. It does not support this function."
even after successfully generating partner profiles i am getting this error.
could someone help me out with this problemHi Siddharth
Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
Please update..
Regards
Ashish -
Detaching the model from the component
Many Swing components such as a JTextComponent have a separate model for the data. I'm concerned about what happens when that model backs multiple components, for example a single Document that is used by multiple JTextFields. Generally listeners are added to the model to update the component when it changes, but when/where are they removed? I was just looking through JTextComponent/JTextField and don't see any place it's being cleaned up.
So what happens when the model is backing two components, one which is in a containment hierarchy and one which is no longer in a containment hierarchy and has been discarded? Since the references are concrete I don't see how it can be collected. I'm trying to figure out what the convention is regarding this. Do you keep weak references to listeners? Do you simply not use a model to back multiple components? Do you override removeNotify() (or some other method) to remove listeners (and if so, what do you override to add them again if you get added to a containment hierarchy again)?
Any advice is appreciated.
waits for camickrThe only think I can suggest is to try
textComponent.setModel( null ). Before adding
DocumentLIsteners to the new model it removes the
DocumentListeners from the old model.I'm not so much concerned with swapping models as I am what happens when I have one model backing multiple components. Say I have some data that for the purposes of the GUI is backed by a Document. If I want to display that data, which might even be something that can be mutated by the user, then I use that Document. In the case of a JTextComponent it already uses a Document for it's model so you simply set the model to be your own Document. Now every JTextComponent displays the right data and can update the correct data.
The problem is what happens when some part of the GUI is discarded and it contains a component that is backed by this model? Either the entire thing being discarded needs to be self-contained and not attached to anything you're holding on to (or vice versa), or it needs to have some mechanism to detach it. How does Swing do it? I've been thinking there must be something to deal with this, something fired when it's removed from a containment hierarchy. For example, why in the world would a JTextComponent that's not even in a containment hierarchy keep updating itself when the model changes?
I found removeNotify() but from it's documentation I'm not sure if it's appropriate and JTextComponent doesn't seem to remove listeners anywhere unless you change the model. I'm quite perplexed as to how (or perhaps when) the actual visual component gets detached from whatever it needs to function when it's no longer being displayed (e.g. I removed it from the frame and no longer have a reference to it). -
Error while distributing the ALE distribution model through BD64
Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards, -
i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?
The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.
Maybe you are looking for
-
I got HP Pavilion dv7-6b76eo i7-2670QM 2.2 GHz 8GB DDR3 1333Mhz 1TB SATA 5400RPM AMD Radeon HD 6770M - 2 GB GDDR5 out of ~6GB dedicated Installed the latest version of Win 8.1 + all it's updates + the update 1. So it's as latest as possible. Even ins
-
Windows guy looking hard at MacBook Pro
I have been looking at Macs for a long time and find myself in need of a laptop computer. I do 70-80% of my work in Photoshop/Dreamweaver/InDesign small amount in Illustrator. I currently run XP-Pro on all my computers. Vista isn't looking very attra
-
Hi, on the target database side i added one tablespace and one user is assigned to that tablespace and he created some objects and inserted some data. now, i already taken the backup of the database except this tablespace. so now i want to take this
-
Cairo-compmgr-git and shadows for new windows
Hi, I'm using stand-alone Openbox and installed cairo-compmgr-git from AUR. Everything seems to work fine except for one thing, shadows don't get drawn for new windows, just for the ones I have already open when I run "cairo-compmgr -n". This doesn't
-
Outstanding balances and Credit Limit Query
Hi Experts! Can anyone write a query wherein it shows the following columns: 1.) Customer Code 2.) Customer Name 3.) A/R Outstanding Balance 4.) Total amount of checks of that particular customer that have due dates after the current system date. 5.