What is DTP in BI 7.0 why is it used what are it advantages?

Hi all,
I am new to BI 7.0 why should we created DTP what is it significance. Can anyone let me know how to create DTP.
thanxs
haritha

In BI 7.0 if you load data from Source System it will go to PSA.This is still done by Infopackage.Here Infopackage can't push data beyond PSA .
so loading will be like
Source System>DataSource>Infopackage--->PSA.
Now once the data comes to PSA ,it can be further updated to a Cube a DSO or Infobject using a DTP+Transformation.
Here DTP and Transformation are parallel to each other .Each Transformation will have its dedicated DTP.Now whether your request is init or delta it will matter only while you are loading till PSA,so its only the concern of your Infopackage.DTP will not care much about that .Its main job is to push the request of the PSA to Target or to Push the request from One target to another target.So data flow is like this
PSA>Transformation+DTP->Target->Transformation+DTP>Target1
Now ,the important question is then what is Delta and Full in DTP.If you have setting as Delta in DTP then it will only pull the unloaded request from PSA and ignore the request which have been successfully loaded to the Target.It very important point to be taken care of.For loading between Data Target to Data Target (Data Mart scenario) delta option will bring only those records to Target1 from Target which have not been present there.
If you have full load DTP ,it will pull all the requests from PSA irrrespective of whether they have been loaded or not ,causing you sometimes duplicate records issue etc.
Please let me know if you have any doubts .
Regards,
Rohan

Similar Messages

What is commitment item in sap ps, why do we use it , plz explain...thankx in advance

what is commitment item in sap ps, why do we use it , plz explain...thankx in advance

Hi
Commitment item is a term used in FM module.
It is by the way of Commitment item cost is posted and budget check is occurred in FM (Fund centers)
Google it to understand it in detail.
Regards
Saurabh

We just switched to a jetpack for wifi and within 24 hours used 1.8GB with only typical web browsing, no videos and two Kindle downloads. What's going on??? Why is it using so much data?

We had a 5GB plan with an air card for the past 4 years and rarely went over our data plan but wanted wifi. We were told the jetpack was the way to go. But within 24 hours of setting it up we went through almost 20% of our monthly allowance! We didn't use the computer any differently than we usually do and only used the wifi for 2 Kindle downloads and then disconnected the device from wifi (verified on the jetpack) yet our usage is going through the roof. I will blow through my 10GB in a week at this rate. Very frustrated and don't know where to look for "leaks." help? Any ideas? I don't seem to have any devices drawing from wifi that I don't know about.

EXACT SAME THING HERE but VERIZON DENIES and calls us LIARS......
HAHAHAHAHHAHA Verizon DENIES even hearing about such issues. DENIES even knowing the forums are full of this issue but then tells me that those who post on forums are LIARS. Accused me of lying then talked about how much integrity verizon has. HAHAHAHAHA what a joke. Expect unexplainable overages. Expect verizon to continue stealing until you either a) fulfill your contract and escape or b) cancel and pay the termination fee (I suggest canceling as it will be cheaper to pay these (removed) their extortion than to continue to pay overages THAT DO NOT EXIST) You are NOT USING the data, the data is MISCALCULATED/MISREPORTED or verizon is just jacking with everyone to increase revenue, increase stock value,increase bonuses. RICO anyone? WHERE ARE THE LAWYERS WITH THE CLASS ACTION ON BEHALF of those of us stuck in our verizon (removed)??
Comments edited as required by the Terms of Service.
Message was edited by: Admin Moderator

HT4859 What and where is the Camera Roll that Apple keeps referring to? What is it for? How and why would I use it?

I haven't a clue. I asked the question.

Thanks. I understand the initial concept that pictures I take are not on my device but on the camera roll. Or in your language, they are on the device. But after talking with able it seems I can roll the pictures around, from all the strange places that pictures might be sent to and returned from, including to the camera roll. So at the moment i figure that it is a place where I can save pictures, return pictures, and save pictures. Not albums, not photo stream, not recently recovered, not recently downloaded, just llike a camera, but I understand that I can return pictures to the camera if I want to save them or show them to anyone if my device is off line. Thanks for trying to help. It's way beyond my ken.

Hai every body, can any one tell what is Adobe Forms, why it is used,?

hi ,
can anyone tell what is adobe forms?when and why it is used ?
Can i have step by step screen cams for adobe forms, please help me.

Hi,
Welcome to SDN.
If you click on the eLeaning tab at the top of this page then choose 'SAP Interactive forms by Adobe' on the left hand column you will find loads of training material on this topic.
Regards,
Nick

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

What is DTP in BI 7

Hi Experts,
Can anyone tell me what is DTP and what is the purpose of DTP in BI 7 ?
Regards
Venkata Devaraj

DTP:
The dataflow in 7.0 is so, first you need to get data to PSA with a infopack and from there you need to use DTP to load from PSA to the dataprovider(ODS). and other DTP to load to further infoprovider(cube).
DTP is it like transferring data either from InfoObject or Infocube to another infoobject or infocube?
NO, DTP is scheduling data from PSA to infoprovider/s. you would need to use infopack to load data from Sourcesystem to PSA.
Transformations are just like transfer/update rules in 3.x. its just the mapping you do between the source fields and target fields. And DTP to load the data according to the mapping into the infoprovider.
Purpose:
You use the data transfer process (DTP) to transfer data within BI from one persistent object to another object, in accordance with certain transformations and filters. In this respect, it replaces the data mart interface and the InfoPackage. As of SAP NetWeaver 7.0, the InfoPackage only loads data to the entry layer of BI (PSA).
The data transfer process makes the transfer processes in the data warehousing layer more transparent. Optimized parallel processing improves the performance of the transfer process (the data transfer process determines the processing mode). You can use the data transfer process to separate delta processes for different targets and you can use filter options between the persistent objects on various levels. For example, you can use filters between a DataStore object and an InfoCube.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.

What is DTP in BI 7.0 ?

What is DTP in BI 7.0 ?
Please search the forum before posting a thread
Edited by: Pravender on Sep 6, 2010 1:20 PM

Hi,
DTP is data transfer process which is used to transfer data from psa to Data target.
Or from one data target to another data target.
In BI 7.0 InfoPackage used to transfer data from source
system to data source/PSA and data transfer process(DTP) is
used to transfer data from data source/PSA to any data
target/Info provider.
Type of DTP>
1.Standard DTP.
2.Error stack DTP :->This DTP is used for error correction.
Ex:-If you have 10 records are coming to DSO,out of 10 if 5 records contain some special character.
Then 5 records will automaticaly moved to DSO and remaining errored record will move to error stack.
After going to monitor tab,click on error stack,there we can correct the record and run the error stack DTP.
This will update the errored record also.
3.Direct update DTP.
4.RDA DTP.
Regards,
Saveen kumar
Edited by: saveen kumar on Sep 5, 2010 4:51 PM
Edited by: saveen kumar on Sep 5, 2010 4:54 PM

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

Why do we use open URL in default browser function? What are the uses of it?

Why do we use "open URL in default browser" function? What are the uses of it?

kdm7 wrote:
Okay.
So can we keep a web button to access the www.ni.com ? So that web site opens only when button pressed?
P.S I,m a newbie.
Yes, you can also, e.g. include a help file or manual as html and open that in the browser.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

What is y3.online.sec.update and why/who is this t...

Hello:
What is y3.online.sec.update and why/who is this trying to call me/message me via my skype?
Normally if there is an official skype security update/fix it is automatic when I log in so is this some type of phishing scam? I blocked the contact.
Thanks for your help.
Solved!
Go to Solution.

you can also visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
This is actually "specific" to this Photoshop Forum.
I typically get responses back from other Adobe forum promptly.
Chime in.

The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING! Please name any other big company where you get to interact with the engineers AT ALL. I can't. But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
Your comments are more along the line of "I pay a huge amount, for that I expect better support". These are very valid comments. But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL. In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
At the higher level, Adobe may simply not be spending enough on support for literally millions of users. Is is greed or smart business to try to minimize support cost? That's up for individuals to decide.
I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
-Noel

Function module: why do we use FM and what is the purpose of using FM

hi,
   Can any please explain. Why do we use FM?
                                       What is the purpose of using FM ?
                                       Where we are using FM and for what tables in R/3 ?
I could be thankful to you if any one answer above questions.
Arun

Hi,
We go for creating FM when there is a chance of using the same code in different reports in R/3.
Suppose I have a requirement say, to display the Payer Name for every sale order.
This is most common requirement in any project.
You can create a FM say READ_CUSTOMER_NAME in SE37.
Write a select statement from the table VBAP to fetch the Payer Name based on the Sales Order.
Now you can activate the FM and it is ready to be used across all the reports in R/3.
Need : To avoid redundant coding and to modularize the code.
If you want to see the list of Standard FMs, got SE37 --> press F4 and you'll get all the SAP standard FMs.
For customized FMs (User defined), type Z* or Y* and press F4.
Hope this helps a bit !!!
Regards,
Balaji V

I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. I have to immediately move to trash all the duplications on my desktop. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of.

What is DTP in BI 7.0 why is it used what are it advantages?

Similar Messages

Maybe you are looking for