What is error -1 , and why can't I run any daq vi's

I want to use my LAB-PC+ card for
data acquisition on a win 3.1 system with labview 3.0.1. We are using NiDaq 4.6.1.
Checking the card with WDAQCONF
shows it passes the tests and can read
voltages without error.
However when trying to use the DAQ
vi's , Labview either gives error -1, error -10240, or crashes. Why would this be?

Jeremy,
the reason you are able to configure and test your Lab-PC+ is because you are using ni-daq 4.6.1, a driver version that does support your daq board. However, labview 3.0.1 does not work with ni-daq 4.6.1. That is why you are getting warning -10240 which occurs when the driver interface can either not locate or open the driver. Warning -1 also comes up when there is a communication issue, again in your case its due to the incompatibility of your driver version with labview 3.0.1.
You need labview 3.1.x in order to be able to use it with ni-daq 4.6.1. I would actually highly recommend that you upgrade your labview version to our latest version 6. That way you can use your card on a newer windows machine (i.e. win 9x, 2000 or NT) along with our newer ni-daq driv
ers.
Regards,
Afreen S.
National Instruments
www.ni.com/ask

Similar Messages

When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive. What is that? And why can't I delete it?

When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive. What is that? And why can't I delete it? I already reset my phone and a week later they came back.

I download my pictures by:
!) Connecting my iphone to he computer.
2) It will open a window or I will go to my computer and select iphone device.
3) Open up Iphone folders and download.
When I do that, I see a windows icon, with what looks to be a hard drive. And when I click on it, it leads me back to my desktop. Right now, I only have one. I know by tomorrow I will have more. It just keeps spreading.

WHAT is "Hibernate this Group" and why can't I find ANY information on this and HOW to get accidentally hibernated groups BACK???

This is REALLY getting me frustrated! What is "Hibernate this Group"? Why can't I find any information on it? Why can't I get groups back that have been accidentally "hibernated"? There is a "moon" symbol on my upper right screen that says "Hibernate this Group" and I don't know what it does or how it works! AND I accidentally "hibernated" a group when I clicked on it too long and a bunch of "zzz's" showed up and then it was GONE! How do I get it all back? And why isn't there a tech center I can contact to help with this???

This sounds like some third-party app or extension, because this functionality is not in Firefox by default. [[Reset Firefox – easily fix most problems]] should remove it

What is a .pkf and why can't I open it?

Newb here,
I am working in Audition for the first time (by employer's request). I was given session files as .pkf files from work but have no idea how to open them at home.
I have searched through all of the previous forum entries, help folders and google to no avail. I have a deadline to meet and am getting nowhere closer.
So in summary,
What exactly does a .pkf file hold? Session info? Audio?
Why can't I open it in Audition if it was created by it? How do I open it?
Any info would be very helpful! Thanks for taking the time to read my request!
(also, let me know if this is the wrong place for this)

THANK YOU!!!
You have provided me information that I couldn't find after countless hours of searching everywhere imaginable!
I'll go contact my employer right now. I have all the audio files but no session files (sesx) that would contain all the range markers I need.
Thanks again!

There is a persistent red dot/light on my Iphone 5 at the top of the device, next to the speaker. What is this? And why can I see it?!

This red light has been present for a long time now and I can see it clearly at night and vaguely in the morning. It is actually quite annoying now. Surely I can't be paying so much for a phone that is going to do that? Can you guys please tell me what this is and why it's happening?

What you are seeing is the proximity sensor.
Try basic troubleshooting from the User's Guide which is reset, restart, restore.

What is Error 1 and how can it be fixed?

I just downloaded the creative Cloud and it has given me a pop-saying 'Error 1' what is this and how can it be fixed?

uninstall, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Every time i try to download a pdf program an apple script comes up and the download does not go through what is the problem and why can i not download?

I try downloading games and things but every time i do apple script comes up with an encrypted file. It has done this sense i bought this lap top. Please help me.

Okay, can you reply letting me know if the computer was purchased used?, this will help as it would identify the possibility that the prior owner did indeed create some sort of block.
Next, what you are speaking about blocks in regards to downloading 'PDF software'...is it PDF 'software' or PDF files that are blocked?, it appears that maybe it's the PDF files which are blocked at which case it indeed my be programmed into the system.
Please answer these and we can further assist you in reaching an answer. As for this list you have provided, I would need more than simple bullets....if you can provide the location of these 'bullets' and file extension...that would get the ball rolling.
Thanks

What is AirPlay? And why can't I find it?

I have seen the adds for AirPlay but can't find out anything about it. Help?

AirPlay consists of a couple of different parts: device discovery, and streaming media. In order for you to use AirPlay, you need an Apple device to share the media, and another device that supports AirPlay and will stream content from the Apple device. On the Apple device, the icons/buttons for AirPlay only appear if the device is connected to a network that contains another device capable of receiving the content.
The way it works is that the Apple device sends out a broadcast on the network it is connected to and essentially asks: "everyone that supports AirPlay, tell me your network address". Devices that recognize the request chime in with "I'm at address X and I can play music". The Apple device then keeps a list of AirPlay capable devices and when an app can send something over AirPlay, it sends a message "Hey device at X, here's some content" and X pulls the content from the Apple device and plays it.
There are a number of wireless speakers, stereos, and similar devices that do AirPlay audio. At the moment, though, I think only Apple products (like Apple TV) handle video.
The key, of course, is that you minimally need two devices for AirPlay: on that knows how to send the content, and one that knows how to receive it. If you don't have both, Apple software will not even show the icon/button for the feature (because you can't possibly use it).

What is, "Motion Calibration" and why is it always running?

I recently upgraded from a 4s to a 6 so a lot of things are new to me. But why is, "Motion Calibration" running 24/7 in Location Services? Won't that nuke my battery?

I think I might be able to answer this now, although it may be a little late in coming. The reason this setting was introduced was probably not to determine how many steps you take, but to correlate it more specifically to your distance. It must have been introduced when Apple started work on the Watch and realized they couldn't put GPS into it to measure distance running.
Instead, blurbs on Apple's site say that the watch learns what your stride is based on a few runs with your iPhone. Because there is no third-party app the Watch can tap into in order to measure this, this setting must have been placed there in order for a user to be able to have these measurements ready for when they do purchase and pair their Watch with their iPhone. The Watch would then be immediately able to access both walking and running distance that had been measured more accurately by the iPhone for months. If you deactivate it, you can still get a very accurate step count, but the distance is a guesstimate based on your height. With Location Services enabled, Apple can measure distance much better, and this aids the fitness experience in the Apple Watch.

What does this error mean and why can I not find a reference to it ?

In my continuing saga to get the type of backups I want our new Basis
Admin had me use the brarchive option -ds to brbackup
brbackup -u / -p init$.sap -t online -m full -c -a -ds
the brarchive option being -ds
when the above was executed it gave the error
BR0197E Chained start not supported for '-ds'
I can find no reference to BR0197E anywhere
-pete

Hi,
Found it as an "Info" message, not "Error". But it seems your case:
<i>BR197I Chained start not supported for '%s'
Explanation: A BRBACKUP and BRARCHIVE backup in a single run is not supported for all combinations of parameters or options (for example, not for backups to disk with backup_dev_type = disk ).
Program response: The BRBACKUP/BRARCHIVE run terminates.
User action: Do not use the parameter or option in the message for the chained start.</i>
Regards,
JC Llanes.

What is this file and why can't I do anything with it?

I found this file in All my Files today and it's bugging me a bit. It seems to be a Pixelmator file with the same creation date as the file before with, giving me the impression they're linked somehow. The mystery file, however, doesn't have a location, is bigger than the other file (247 KB compared to 161 KB) and can't be opened.
Does anyone know what it is and how I can remove it?

It's an entry in the Spotlight index, not a file.
Select  ▹ System Preferences ▹ Spotlight ▹ Privacy. The list of items excluded from Spotlight indexing is shown (it may be empty.) Click the plus (+) icon to add an item to the list. Select your boot volume (under DEVICES) and add it to the list. Then remove it from the list by selecting it and clicking the minus (-) icon.
Spotlight will rebuild the index. If you try to do a Spotlight search now from the magnifying-glass icon in the top right corner of the display, a pulsing dot will appear in the icon. When the dot disappears, the indexing is complete. Try the search again.

I tried to download the latest OSX Mountain Lion and got this notice - "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed. " What does this mean and why can't I download it?

I tried to download the latest OSX for my iMac - Mountain Lion.
This is the message that I received:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
What does this mean?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

What is error 4007 and how can i fix it?

I haven't found anything helpful online, regarding the Unkown Error (-4007) I'm getting when I try to use iTunes Match?
I'm suspecting that it might have something to do with the OS and iTunes versions that I have running on my old MacBook Pro.
Anyone have any insight into possibly fixing the error?
MacBook Pro
2.2 GHz Intel Core 2 Duo
OS 10.5.8
iTunes 10.6.3
Thanks much!

I managed to get through to someone at support.
They said to try this:
Open iTunes
Store > Sign Out
Quit iTunes
Let it sit for a moment before re-opening iTunes
Store > Sign In
Turn on iTunes Match
It seems to be working for me. Crossing fingers that it continues to work.

Message received when I try to sign in to our wi-fi : " connection timeout". What does this mean and why can't I sign in to our wi-fi ?

NEed help signing in to our wi-fi. I receive message " connection timeout" . What Does this mean?

If the Wi-Fi diagnostics are okay then check your own Wi-Fi router to find out how many clients are connected. The number of clients may not matter but how much data Hogging is going on. If you have multiple computer Services accounts active Wi-Fi cannot handle that much. Examples would be two people playing World of Warcraft, Two people watching a Netflix movie or AppleTV movie, One person Downloading iTunes movies or music at the same time. That accounts for a lot of Wi-Fi usage.

What ssd do they use in a pavilion d7 and why can't i get any specs. on it

-I mean real specs

This sounds like some third-party app or extension, because this functionality is not in Firefox by default. [[Reset Firefox – easily fix most problems]] should remove it

What is error -1 , and why can't I run any daq vi's

Similar Messages

Maybe you are looking for