What is Error 1 in Application Builder?

I'm trying to set-up my app and encounter the message "Error 1 occurred at C:\setup\xyz\internal.llb\Append Report Text.vi".
Anyone who can explain and tell how to memedy?
Thanks in advance
Klaus

Jonathan,
I'm presently using 5.1.1, which I upgraded from 5.1.
Any ideas on this version as well?
Thx and regards
Klaus
Jonathan H wrote:
> Klaus,
>
> Which version of LabVIEW are you using? There was a known issue in
> LabVIEW 6.0 that was corrected by the 6.0.2 patch. If you are
> currently running LabVIEW 6.0, I would highly recommend downloading
> the patch from ftp://ftp.ni.com/support/labview/updates/ or upgrading
> to LabVIEW 6.1. If you use the patch,ensure you download the LabVIEW
> 6.0.2 Run-Time Engine as well.
>
> Regards,
>
> Jonathan Hildyard
> Applications Engineer
> National Instruments
>

Similar Messages

Error message in application builder in Build Application.vi

Hello,
I'm trying to make an executable file but I recive the following error message:
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
Possible reason(s):
LabVIEW: The VI is not executable.
Does anyboy know the reason for this message?
Thanks.
Javier de Pablos

Hello Jaime,
I've tried to compile a very simple VI (there is only a while loop that executes nothing and counter is wired to an indicator.
I've attached you.) and I've got the same error. So the code or any dynamic VIs are not the problem.
I've repaired the Application Builder within Control Panel > Add and Remove programs but I haven't resolved the problem.
Javier de Pablos
Attachments:
Untitled.vi ‏13 KB
gg.bld ‏1 KB

Error message in application builder

Error 6 occurred at Copy in Dist New VI Library.vi->Dist Chk for Destinations.vi->Dist Build App Image.vi->Build Application.vi
Generic file I/O error

Try doing a Save All (File>>Save All) and a "Mass Compile" <Tools>>Advanced>>Mass Compile) before building the executable.

Application builder error coder 21

I get this error code when trying to build an application and include the visa runtime install files
What can i do to fix this error
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Validating...
Copying files...
Scanning files...
Updating files...
Build complete successfully.
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'LabVIEW 2009, Media 1' from: \\dtads2\it_software$\Labview 2009\DVD 1 of 2\Distributions\LabVIEW\LabVIEW2009\ to: C:\Documents and Settings\brockmaa\Desktop\11164 Carnivore\builds\FVT1_4 test\My Installer\
Copying distribution 'National Instruments Device Drivers - February 2010' from: C:\National Instruments Downloads\NI Device Drivers\Feb10\ to: C:\Documents and Settings\brockmaa\Desktop\11164 Carnivore\builds\FVT1_4 test\My Installer\
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
*** Error: An internal tool or library returned an error. (Error code -21)
Error Messages
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper32.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-ORB' not found for part 'niorbi.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-ORB {F2D3406A-0A97-4EB9-9A09-F20A874C16F9}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-ORB' not found for part 'niorbi64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-ORB {F2D3406A-0A97-4EB9-9A09-F20A874C16F9}.xml'.
*** Error Details:
Error in MDF API function: _MDFBuildDist_Build
Error List
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper32.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
While validating input parts.
and so on

Hi brockmaa,
It seems that the files it needs to include the VISA runtime are not being found on your system. Try re-installing the correct version of VISA you need from:
http://www.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du,n8:3.25.123.1640,ssna...
and try to build the installer again and it should be able to find the correct files.
DylanC

Application builder error creating

After install Labview 9.0f2, no longer is possible to build application
Solved!
Go to Solution.

Would you like us to continue guessing, or would you be capable of providing some details?
Such as what the error is?
What was the version of LabVIEW you were using?
What toolkits you are using?
Anything else you can think of?
Remember, we don't have one of those nice troubleshooting scripts that call centers have.

Error 7 application builder invoke node

I get this error when I tried to build an application. "Error 7 occured at Invoke Node in Dist read linkage.vi-> Dist Cmp Settings to Disk Hier.vi-> Dist Build App Image.vi-> Build Application.vi Possible reason, LabView: File not found.....and then NI-488 Non Existent board." Anyone knows why? I was able to build application just fine last night. But then when I tried to build it this morning, that's the error that I got. Thanks.

Check the info in this link:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000016730000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=Error+7&USEARCHCONTEXT_QUESTION_S=0

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Error -41 LV8.6 application builder

Hi,
I am trying to build an installer and I am getting this error -41 (unknown origin). I am using Visa with three instruments.
Here is what is says :
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_InitializeDistribution.vi >> NI_MDF.lvlib:MDFConfig_SetBuildDir.vi
C:\Documents and Settings\Nusi\Mes documents\recherche\labview\Builds\rho_ac\rho AC "version light"
Chargement des informations sur le déploiement des produits
Chargement des informations sur le déploiement des produits
Chargement des informations sur le déploiement des produits
Chargement des informations sur le déploiement des produits
*** Erreur : Une erreur interne de cause inconnue a eu lieu (code d'erreur -41)).
*** Fin du rapport d'erreurs
For the details I got :
Visitez la page de demande de support sur ni.com/ask_fr pour en apprendre davantage sur la résolution de ce problème. Utilisez les informations suivantes comme référence :
any ideas ?
thanks a lot

Your description reminds me on some unexpected errors which I had while building my application. But I don't remember exactly what happened. On point were missing external files. This does not affect the building of the application but the installer cannot finish. I suggest to look carefully thru your project and see whether there a missing files. The other time I think there was a VI being not part of a class or something like that. But that should be detected while building the application. So I don't remember it exactly but I hope it will help you to find the problem yourself.
Regards

Labview 8.2 application builder - installer deletes previously installed programs

Problem Description :
I've been developing with LabView for 8+ years and recently had to upgrade from 6.1 to 8.2 because of compatibility issues with LabView, MAX, DAQ and SERIAL. LabView had always been so intuitive and efficient, but that has changed to some degree sometime after 6.1 IMO. I won't get further into that, but I am having several problems with Application Builder and particularly, with creating an Installer and installing test programs. I haven't seen many posts on this subject so I assume I am doing something wrong.
In 6.1, I could build a program and create an installer in minutes, and all in the same step - Click on Build and the installer was created. I could also locate my files anywhere I wanted. Unfortunately the process in 8.2 is no where as simple as one has to create a build and installer separately. So far, I haven't been able to distribute my installer files where I want them according to our internal procedures. The build portion works fine and I can locate my files as needed, but not so for the installer (at least I haven't figured it out yet). The main problem is that I have some common DLLs that I'd like to locate in a common directory for all of my programs, but it seems like I'm stuck putting them in the installation directory of every program that I write. Again, it is fine in build. There doesn't seem to be any flexibility in changing the location of the files in the installer. I did see a post somewhere that mentioned that DLL files must be located in the system directory if you don't want them included in the build or installation. I would just like to install the dlls to a common directory and not include them in every installation directory. Just like I did in LV 6.1!
This is a relatively minor problem compared to what happens when I try to install the programs.
I have five separate programs for which I have recently built and created installers with the limitations that I've described above. I can install one program on my machine and it runs properly. If I try to install any of the
other four, they will delete the previous installation - all the files are deleted (they all have different names). What I think is going on is that the installer thinks that these five programs are the same and simply overwrites the previous installation. One reason I believe this, is because I tried an installation and it failed with the error message that there was already a higher version installed. The higher version it was referring to was almost certainly the one program I could install, but certainly not a higher version of the one I was trying to install (it didn't exist yet). After I uninstalled the one program, I could install any other four. It doesn't matter if I install on the build computer or the target computer (ATE).
What am I doing wrong? Please help me to resolve this problem.
I wan't the build and install files in the same exact location:
Example of my five programs and the locations of build and install:
C:\KIK2-LabView\Customer Name\Base Part Number1\Program1.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number2\Program2.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number3\Program3.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number4\Program4.exe.......
C:\KIK2-LabView\Customer Name\Base Part Number5\Program5.exe.......
The support files will also be put in the corresponding directories. The common files were supposed to go in the KIK2-LabView directory instead of copies in every installation directory.
Is there something I have to do with the registry? In 6.1 it was all automatic.
I hope there are simple answers to my problems, but I have yet to find them out. I have been able to find very little info on Application Builder, and nothing that is comprehensive.
Thanks!

Thank for the reply, Andy
I have scoured the Help files and this forum which helped me to create the build and installer, but they didn't address any of the problems that I described in my post. I tried to make sure that I exhausted numerous resources before posting and requesting help.
I appreciate the response, but you didn't quite get to my most important problem - that when I try to install a program from the created installer, it overwrites my previously installed program. Actually I have found the answer in a different thread. --->  http://forums.ni.com/ni/board/message?board.id=140&message.id=16146. My problem is that I cut and pasted all of my project files and made the appropriate changes specific to each new project. If you don't create brand new builds and installers in these projects, you will create duplicate registry keys, even though all of the names, numbers, files, etc. were changed to be completely unique. I opened the .lvproj file in notepad and found several registry keys to be the same; here is an example:
<Property Name="UpgradeCode" Type="Str">{831013BF-9112-45AA-BF13-A13F08098841}</Property>
All of the projects that I created by cut and paste (and edit) method had this same exact key (as well as other keys) which was causing the previous install to be deleted/overwritten or gave me the message that a higher version already existed.  Again, this happened even though all of the project data was completely unique after it was edited, including the project filename (of course). Finally, I completely rebuilt my projects from scratch starting with "New Project" and voila, they now all install properly. Obviously, none shared any of the same registry keys.
I don't know if this is something that was overlooked, but it is so much easier to cut, paste and edit projects when they are very similar.   Unfortunately I have found out the hard way that new build and install spec's must be created. Is there a change that can be made to the Project File in LabView so that when certain information changes (like the executable file name) that new registry keys will be generated? It is obvious that you don't want someone to accidentally install a lower version of the project over a newer one, but it would have prevented my work time loss (several days) and will prevent time loss for others in the future as well. Could you at least consider allowing the developer to generate new keys like was available in LabView 6.1?
Also concerning the location of files, I previously had done all of what you said and can locate the build files where I want. However, in the Installer (Source Files Tab), when I create the folders in [Windows Volume], all of the files from the build spec are put into the SAME directory, regardless of where they were located in the build spec. If I try to delete one file, all will be removed. I can't place individual files where I want them to go in the installer (if they are a part of the build). Example: In the installer, I created the subfolders KIK2-LabView\Customer\UUT Base Part Number on the [Windows Volume] directory and set the UUT Base Part Number as default. I want most of the files to go into the default directory, but a few of the dependent dll's should go into the KIK2-LabView folder as they are common to many other programs/projects. In short, I don't need or desire 50 copies of these dlls on my ATE. I was able to locate the installer files anywhere in LabView Pro 6.1, but so far I can't figure out if this is possible in 8.2. It would appear that it is not.
Thanks,
John W.

HT201442 What is error 3194 for Iphone? How to fix it

What is error 3194 for Iphone 3GS? How to fix it?

This usually occurs if your iTunes vesion is out of date, when your device has been hacked in attempt to downgrade the iOS or you used hacking software such as tinyumbrella that altered you computer hosts file.
See this:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

What is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Above from:
http://support.apple.com/kb/TS3694

[solved] vice-gnomeui 2.3-1 - ERROR: A failure occurred in build().

I hope that this is the right place to ask for help regarding PKGBUILD errors from software downloaded via AUR.
I was trying to compile & install VICE (a Commodore 64 emulator) on my PC from http://aur.archlinux.org/packages.php?ID=13418&detail=1
First I got 2 dependency warnings for "audiofile" & "esound", but I was able to install "audiofile" using pacman, and to compile/install esound from AUR.
However, when I tried makepkg for "vice-gnomeui 2.3-1" I got the following error:
In file included from ffmpegdrv.c:35:0:
ffmpeglib.h:60:55: error: unknown type name ‘AVFormatParameters’
ffmpeglib.h:64:29: error: unknown type name ‘ByteIOContext’
ffmpeglib.h:65:30: error: unknown type name ‘ByteIOContext’
ffmpeglib.h:98:5: error: unknown type name ‘av_set_parameters_t’
ffmpeglib.h:102:5: error: unknown type name ‘url_fopen_t’
ffmpeglib.h:103:5: error: unknown type name ‘url_fclose_t’
ffmpegdrv.c: In function ‘ffmpegmovie_init_audio’:
ffmpegdrv.c:346:21: error: ‘SAMPLE_FMT_S16’ undeclared (first use in this function)
ffmpegdrv.c:346:21: note: each undeclared identifier is reported only once for each function it appears in
ffmpegdrv.c: In function ‘ffmpegdrv_init_file’:
ffmpegdrv.c:616:10: error: invalid type argument of unary ‘*’ (have ‘int’)
ffmpegdrv.c:635:14: error: invalid type argument of unary ‘*’ (have ‘int’)
ffmpegdrv.c:636:29: error: ‘URL_WRONLY’ undeclared (first use in this function)
ffmpegdrv.c: In function ‘ffmpegdrv_close’:
ffmpegdrv.c:727:14: error: invalid type argument of unary ‘*’ (have ‘int’)
make[3]: *** [ffmpegdrv.o] Error 1
make[3]: Leaving directory `/home/pe7er/build/vice/vice-gnomeui/src/vice-2.3/src/gfxoutputdrv'
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory `/home/pe7er/build/vice/vice-gnomeui/src/vice-2.3/src'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/pe7er/build/vice/vice-gnomeui/src/vice-2.3/src'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
I am not experienced with building from source & solving compiling errors.
How can I solve this problem and compile/install Vice?
Thanks in advance!
Last edited by pe7er (2012-08-01 11:53:14)

Great, thanks!
The error with the missing ffmpeg.patch has been solved when using the tarball.
Unfortunately I got another error:
In file included from ffmpegdrv.c:35:0:
ffmpeglib.h:60:55: error: unknown type name ‘AVFormatParameters’
ffmpeglib.h:64:29: error: unknown type name ‘ByteIOContext’
ffmpeglib.h:65:30: error: unknown type name ‘ByteIOContext’
ffmpeglib.h:98:5: error: unknown type name ‘av_set_parameters_t’
ffmpeglib.h:102:5: error: unknown type name ‘url_fopen_t’
ffmpeglib.h:103:5: error: unknown type name ‘url_fclose_t’
ffmpegdrv.c: In function ‘ffmpegmovie_init_audio’:
ffmpegdrv.c:346:21: error: ‘SAMPLE_FMT_S16’ undeclared (first use in this function)
ffmpegdrv.c:346:21: note: each undeclared identifier is reported only once for each function it appears in
ffmpegdrv.c: In function ‘ffmpegdrv_init_file’:
ffmpegdrv.c:616:10: error: invalid type argument of unary ‘*’ (have ‘int’)
ffmpegdrv.c:635:14: error: invalid type argument of unary ‘*’ (have ‘int’)
ffmpegdrv.c:636:29: error: ‘URL_WRONLY’ undeclared (first use in this function)
ffmpegdrv.c: In function ‘ffmpegdrv_close’:
ffmpegdrv.c:727:14: error: invalid type argument of unary ‘*’ (have ‘int’)
make[3]: *** [ffmpegdrv.o] Error 1
make[3]: Leaving directory `/home/pe7er/build/vice/vice-gtkglext/src/vice-2.3/src/gfxoutputdrv'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/pe7er/build/vice/vice-gtkglext/src/vice-2.3/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/pe7er/build/vice/vice-gtkglext/src/vice-2.3/src'
make: *** [all-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
What can I do to solve this problem?

TS3694 What is error 3194 and how do I fix it?!

What is error 3194 and how do I fix it?!

Check out this article: http://support.apple.com/kb/TS3694
See "This device is not eligible for the requested build".

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

HT201442 hi What is error 3004 and how do I fix it?

hi What is error 3004 and how do I fix it?

Hello, Meysam321.
Thank you for the question. Here are the steps that I would recommend going through when receiving error 3004.
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Cheers,
Jason H.

What is Error 1 in Applicatio​n Builder?

Similar Messages

Maybe you are looking for

What is Error 1 in Application Builder?