What is error 5100 for multifunction printeers and how do you fix it?

what is error 5100 for multifunction printeers and how do you fix it?

I have a canon MG3200 printer. I have had this thing a whole TWO DAYS! i had issue after issue setting it up and then finally getting it to print the other day when I got it home. A simple 5 minute print job on any of the other printers I used to have, and it took almost 35 minutes to produce an almost decent quality for some important paperwork that I had to have in the following morning. Aside from that- (I just took that to mean it was the "learning" curve) I now tried to print a simple, one page document. Postage for a package to go out tomorrow morning via USPS. Lo and behold, it had a paper jam immediately. A bad one. Had to spend more than an hour searching around for ways to even get the covers off in order to pull the paper free. Got it cleared out, now the P-2-0, or 5100 error message is just blinking away. I've taking it back apart in the back 3 times now, taken the ink cartridges out and looked for paper jammed, not found anything, and now the blinking error won't go away. Can someone PLEASE tell me how to clear that error message??? I am about ready to return this printer to walmart, and get a different one. If it wn't work, then it does me no good. Thank you in advance for being able to virtually rant and rave about this. mediatrek wrote:
Usually an error 5100 code is saying that the ink carriage has problems. Usually something currently is or recently hammed the cartridge carriage. With the machine turned off and the power cord unplugged, open the machine and inspect the inside do you see any stray pieces of paper along the paper's usually route?
There is a way to reset the machine to clear out the error. I would need to know the exact model of your Canon.

Similar Messages

TS3212 What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."

What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

What is causing, and how do you fix, a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1

What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
I have the latest software so I don't know what to do?
    David V.

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?

Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?

What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How do you sync iCloud (contact, calendar, task) to outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?

I have three device: Macbook Pro (OSX 10.7.5) for work; an iPad and a Blackberry for mobile. I used mail, iCal, and Address Book combine with mobileme (iCloud) to exchange data such as contact, calendar and task from my Mackbook Pro to my iPad but never to Blackberry. The problem is my boss was asking me to change to Outlook 2011 for Mac because some of the email that I sent from Mail did not appear in my client's Blackberry. So how do you sync iCloud (contact, calendar, task) to Outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?
Best regards,
W. Sasongko

More Like This --------------------------------------->

HT1386 What is "other" in the storage category and how do you reduce that amount?

What is "other" in the storage category and how do you reduce that amount?

A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414

HT4009 When I try to buy in app purchases the transaction cannot be made. Why? And how do you fix it?

When i want to make an in App purchase, the transaction always fails. Why? And how can you fix it?

What happens when you try to do the IAP, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

When listening to Fireworks by Katie Perry the base notes sound raspy and distorted even though the eq is set to flat and have tried 2 studio monitor headphones. Has anyone run across this and how did you fix it?

When listening to Fireworks by Katie Perry the base notes Sound raspy and distorted even though th eq is set to flat. I have tried 2 studio monitor headphones when listening and the raspy sound appears with both. The distorted sound from the downloaded song from itunes doesn't show up when listening to it on the computer. No other songs that have been downloaded from CDs onto my ipod classic seem to have this problem. Has anyone else run across this and how did you fix it?

When listening to Fireworks by Katie Perry the base notes Sound raspy and distorted even though th eq is set to flat. I have tried 2 studio monitor headphones when listening and the raspy sound appears with both. The distorted sound from the downloaded song from itunes doesn't show up when listening to it on the computer. No other songs that have been downloaded from CDs onto my ipod classic seem to have this problem. Has anyone else run across this and how did you fix it?

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

What does too many http redirects mean and how do I fix it

Does anyone know what the **** "Too many http redirects" means, and how the **** do I fix it ??

500 errors in the HTTP cycle
Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle when it communicates with the Web server:
Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
Open an IP socket connection to that IP address.
Write an HTTP data stream through that socket.
Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receives an HTTP status code that it recognises as '500'. Frank Vipond. September 2010.
Fixing 500 errors - general
This error can only be resolved by fixes to the Web server software. It is not a client-side problem. It is up to the operators of the Web server site to locate and analyse the logs which should give further information about the error.
Fixing 500 errors - CheckUpDown
Please contact us (email preferred) whenever you encounter 500 errors on your CheckUpDown account. We then have to liaise with your ISP and the vendor of the Web server software so they can trace the exact reason for the error. Correcting the error may require recoding program logic for the Web server software, which could take some time.
http://www.checkupdown.com/status/E500.html

Sduncs00 I am having the same problem what website was acting like that and how did you fix it

What website do I go to and how do I fix it

Can't connect to the iTunes Store
and, if necessary
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect to this network OK?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What is this and how do you fix it. ATS: Invalid FontObjectID (4) - only low 16 bits are being passed in.

Trying to Launch my new typestyler 11 or my old 10 version. Used to work great. then it would just shoe the splash screen and menu bar for a second and dissapear. the concolse message is the ATS: Invalid FontObjectID (4).
What does this mean and how do I fix it?

It's an old post, I know, but I've got this one now:
ATS: Invalid FontObjectID (3) - only low 16 bits are being passed in.
It's in my most important app and causing problems. I worked a lot on this trying to solve it but so far I can't. I'll take any advice you or anyone might have.
Thanks.

What causes vertical color lines on ipad2 and how do you remove them ?

What causes vertical color lines on an IPad. And how do you remove them ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
If still present: Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Don't believe it's a factor, but you should update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

What exactly does the spinning wheel mean and how do you stop it?

What does the spinning color wheel mean exactly, and how do you stop it or do you just let it spin and spin? What causes it to do that?

Start up in Safe Mode. http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
For more on this: http://www.thexlab.com/faqs/sbbod.html

What could be wrong with my iPad and how do I fix it?

My iPad has suddenly started running games slowly and is no longer running videos. I have not updated to iOS 7 yet and I have 7.8 GB available. What could be wrong and how do I fix it?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

What is error 5100 for multifunction printeers and how do you fix it?

Similar Messages

Maybe you are looking for