What is error code -5000 when exporting from imovie?

I am trying to export a 60sec video clip.  I have tried exporting it in different formats but get 'error code -5000' every time.  The video was recorded on my iphone in vertical mode.  Is it having trouble because of the orientation?  It seems to handle it okay in the program itself.

Errcode -5000:
afpAccessDenied               = -5000, /* Insufficient access privileges for operation */
The is most likely an issue with original import. That would be my guess based on the error. Beyond that, I do not know.  It would not have to do with the orientation of the video recorded, however.

Similar Messages

  • Error Code -5000 When Downloading Digital Copy of Hangover

    Has anyone received error code -5000 when trying to download the digital copy of The Hangover from the Special Edition DVD? When you put the DVD in it brings up the code redemption window in Itunes and downloads the file then at the end it says error -5000. Any ideas?

    I just figured my problem out. If you have a external hard drive (WD Smartware) you need to click the backup tab and pause backup before you enter your redemption code. This worked for me and I was getting the same error -5000. I think it gives the error because it is backing up your computer and itunes thinks your making more than one copy I guess.

  • What is error code 5105 when downloading free apps?

    what is error code 5105 when downloading free apps?

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • What is error code 2330 when trying to intall itunes

    what is error code 2330 when trying to upgarde/ install itunes

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • When exporting from Imovie I get the following error? OSStatus error -2009

    when exporting from Imovie I get the following error? OSStatus error -2009

    Hi
    Apple Support pages says.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Yours Bengt W

  • I get error code(-5000) when downloading to 5.0

    I get error code (-5000) when updating to itunes 5.0 . how can i solve this the message says" an error occurred while backing up this ipad(-5000) would you like to continue to update this ipad.
    continuing willresultin the lossof all contentson this ipad.

    Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

  • IDVD Stops Responding when Exporting from iMovie

    I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
    This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
    What I'm doing.....
    [1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
    [2] Edit the iMove project and add chapter markers and save project - no problem.
    [3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
    [4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
    [5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
    I have tried:
    Re-exporting the project from EyeTV
    Deleting the preferences files for iMove and iDVD
    Deleting the iLife suite and re-installing
    Doing an OSX archive and re-install
    Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
    Running Disk Utility - clean bill of health on both drives
    Repaired permissions
    The Console reports the following errors when exporting from iMove to iDVD:
    ===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    [KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
    NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
    Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
    Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

    Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
    What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
    Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
    Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

  • Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?

    Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?
    I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps.  The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file.  How can I get the exported movie to be slowed down?

    joegez,
    There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
    Hope this solves the problem for you.

  • What is error code 2324 when installing iTunes?

    What is error code 2324?  I got this when trying to re-install iTunes.  I was in the middle of the latest iTunes update when I had to cancel it.  Now I can't access my music so I tried to reinstall iTunes but I get this error code.   I also get a error message saying I need Administrator privlages.  Well I am the Admininstrator and logged in as it.  I can't reinstall iTunes and when I go to remove programs I don't see it listed only Apple Application and Apple Updates, along with an Apple Mobile Device Support. 
    I even 'restored' my system to earlier today before I started downloading the iTunes update to no avail.  Any ideas/suggestions?

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • Error code 50 when copying from TC to external HDD

    Hi all, I bought a 3tb TC and backed up about 1.3tb worth of data onto it from an external HDD, I then formatted the external HDD to FAT 32 as I found out that TC does not like to work with FAT 32, no matter, the hard drive ois fixed now. However, when I go to copy all the data back onto the external HDD. i get "an unnexcpected error occured error code -50" or something like that, but the error code is definetly 50. I got this error when trying to copy the movies through, they are MKV files, I checked all the names and I dont think there are any problems with them.
    the setup so far is as follows. Externall HDD --USB--> Time capsule.    All operations are being executed through an imac.
    HELP ASAP will be greatly appreciated.
    Cheers

    Error codes are really hard to figure out.. but i think it will be due to permissions.
    See http://pondini.org/TM/C10.html
    It is an error from TM but I think it comes from underlying OS..
    Can you copy files to this disk from a source other than the TC.. try copying a file from the TC to the Mac and then from Mac to the external disk.. but make sure it is plugged directly into the mac.. if you have issues look carefully at permission. And format/partition type.. do use GUID partition not MBR Or the older Apple systems.
    Re: Error Code-50 when trying to copy or delete files on external hard drive

  • What does error code 0xc0000135 when we were updatng windows 8 to 8.1

    error code 0xc0000135  when we were updatng windows 8 to 8.1. How do i solve this issue

    Hi!
    Follow this link where another user had the same problem, it could be that one of your installed applications isn't compatible with Windows 8.1
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-pro-update-problems-error-0xc0000135/dcde3b6f-b752-4ce7-bbb9-64dd9685031c
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • No sound when exporting from imovie 3,03

    After having read most of the posts related to sound troubles, I still can't figure out why I can't get any sound when I export from imovie 3,03.
    I almost know the entire dan slagle site, and checked every button to play with, I've tried many export or preferences settings (including various depths or rates) but got no result at all.
    Surprisingly, when I grab the .mov file to some converters (ffmpegx), the expected audio part looks to be there, but remains silent (for me, meaning all of the bits at 0).
    Don't hesitate to require additional info - thanks to prompt answers
    G5 2xPPC   Mac OS X (10.3.9)  

    hurrah !
    i just downgraded QT 7.x to 6.5.2 and it worked fine at last.
    From the informations I've gathered, DO NOT RUN QT 7.x WITH OSX 10.3.9
    For those who would follow the appropriate steps to get rid of v7, go to : http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
    and don't miss : http://www.charlessoft.com/
    Thanks a lot to Brie Fly for its so helpful comments.

  • How to sync sound with movie when exporting from iMovie

    i have problems with sound synchronization with movie. mostly is movie delayed few seconds behind sound. also sound is repeatedly missing - under certain frequency. videos are prepared in iMac iMovie and exported in to the file and stored on synology. how to fix this trouble before exporting from iMovie?
    playing movie on imac works without problem

    I have a collection of Apple Support documents about passwords, some of which might be of help ...
    iOS: Forgot Passcode or Device Disabled
    http://support.apple.com/kb/ht1212
    iOS Passcodes
    http://support.apple.com/kb/ht4113
    Find My iPhone, iPad, iPod a Touch or Mac
    https://www.apple.com/support/icloud/find-my-device/
    Find My iPhone Activation Lock
    http://support.apple.com/kb/HT5818
    Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
    http://support.apple.com/kb/ts4515
    Apple release Tool to check the Activation Lock Status of iOS Devices
    http://www.idownloadblog.com/2014/10/01/activation-lock-status-check/

  • Idvd pixelated when exported from imovie

    DVD looks great on imac but dvd is pixelated once exported from imovie and put on dvd using IDVD.
    Any suggestions

    Welcome to the forums, Alison.
    I'm not a GarageBand user, but couldn't you export the GB audio tracks as a Quicktime file, and then import that audio track into iMovie? If it's combined in iMovie, then it should import into iDVD without a conceptual hitch.
    John

  • IMovie error code (-50) when exporting video

    iMovie 09 suddenly started to generate the following error when sharing/exporting video:
    The project could not be prepared for publishing because an error occurred. (-50)
    Exporting using Quick Time option from the Share menu works. The other options fail with the error.
    OS is 10.7.3.
    For what is worth, I have uninstalled DivX recently.
    Any idea how to troubleshoot this?
    Thank you!

    I am having the same problem i have osx 10.7.2 and i get the error code 50 and the error code 8003  what can be done. support treats you like your oblivious to computers and know nothing.  First macbook but not first download or computer.  When using Microsoft systems you download and play so what gives here if this platform is suppose to be the best

Maybe you are looking for

  • Burn Problem with a 4GB project: "Layer 0 Exceeds"

    First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size. I recently had DVDSP 4 crash on me. Ever since than its

  • My iPod touch keeps restarting

    and wont go to the lock screen, all it can do is show the apple logo and after two minutes it will turn off. I tried going into recovery mode but it hasn't worked.

  • Display the particular column in the page Based on some condition.

    Hi, I am using J developer 11g Release 2, I have one page contains form which give the details of a user,in that form i have column called Password,that password column needs to display only when i go for adding a new user,while editing the details o

  • Full file Path when using FormFile in struts

    hi, i am uploading an excel file. All is doing fine but whatever file is selected by user by clicking the browse button, its does not retreive full path it retreives only the file name selected...... JSP page <html:form action="uploadFile.do" method=

  • How to I add credits and slogans at end of movie

    how to I add credits and slogans at end of movie?   also an intro   please