What is exact meaning of bellow

Hello friends,
                      i am purches 
BlackBerry OS 5.0.0.973 for 8530 .
   i didnt know what is the following property mening of bello what is mean by bellow red color.
Package Version: 5.0.0.1708
Consisting of:
Applications: 5.0.0.973
Software Platform: 4.2.0.463
please clear me.

Please look at a atteched image again.
In the image, you will see the information of the area, perimeter.
so, please check again about the perimeter analysis
Indeed, the perimeter calculations that you appear to be seeing are incorrect. The Particle Analysis perimeter algorithm uses sub-pixel interpolation to calculate the perimeter of the particles. When you have very small particles, or very square shapes, the perimeter calculations loose some of their accuracy. For example, I tested on a rectangle that was 97x80 pixels (actual area = 7760, actual perimeter = 354), and the algorithm returned a perimeter of 350, a much smaller percent error than what you are seeing.
With larger, more irregular objects, the perimeter calculation is mo
re accurate with the interpolation algorithms.
Hope this clarifies the behavior you are seeing.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

Similar Messages

  • What do exactly mean by 'document is lost' while filling setup table

    Hi ,
    In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table.  So my questions are as follows :
    1)What exactly do u mean by 'Document is Lost'?  (I mean the document entries,will always be there in application tables ).
    2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table?  (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
    Please let me know your opinion on above questions
    Regards
    Mohit
    Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

    Hi Mohit,
    1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
      Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
    All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
    2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
    Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
    Hope it clears your doubts.
    Thanks.

  • What is exact meaning of the perimeter?

    I trouble about the particle information.
    In my application, After processed the blob, and
    I reported area and perimeter each indexed particle.
    but In the first image, the area is 6, and the perimeter is 8.
    What happen?
    Before I knew, the perimeter is bigger than the area
    But the perimeter is bigger in case of small Particle,
    (Image 1)
    and the area is bigger in case of big particle.
    (Image 4)
    So, let me know about How can analyze the perimeter in detail.
    I attached image files.
    Attachments:
    Inspection_Images.ppt ‏534 KB

    Please look at a atteched image again.
    In the image, you will see the information of the area, perimeter.
    so, please check again about the perimeter analysis
    Indeed, the perimeter calculations that you appear to be seeing are incorrect. The Particle Analysis perimeter algorithm uses sub-pixel interpolation to calculate the perimeter of the particles. When you have very small particles, or very square shapes, the perimeter calculations loose some of their accuracy. For example, I tested on a rectangle that was 97x80 pixels (actual area = 7760, actual perimeter = 354), and the algorithm returned a perimeter of 350, a much smaller percent error than what you are seeing.
    With larger, more irregular objects, the perimeter calculation is mo
    re accurate with the interpolation algorithms.
    Hope this clarifies the behavior you are seeing.
    Regards,
    Colin C.
    Applications Engineering
    Colin Christofferson
    Community Web Marketing
    Blog

  • What's exact meaning for interface ,and where we use this interface

    hi experts,
    i have been asked what is interface

    Hi
    Interfacing is connecting two or more different entities. In our case, it is connecting one or more systems with SAP. Now extending our previous example, you are replacing some legacy applications but there are some applications that you don't want to replace yet. You need to somehow pass data back and forth between SAP and these remaining systems. Data may be going one way or the other way or both ways. You will still need to do some data transformations/translations etc to make the data understandable to the receiving system. This will continue as long as you want to keep the systems running alongside SAP.
    In short, conversions are written to load data into SAP onetime. These are typically file based.
    Interfaces are written to exchange/update/send/receive data between SAP and other systems on an ongoing basis. These can be in many forms, file based, idoc based, real time(business connector, XI etc are useful in this), xml, and the list goes on.
    Reward me if its helpful
    Ravi

  • What exactly means "Restore iPhone"

    I am using the iPhone 4s with iOS 7.1.2 and I want to restore it. But what it exactly means? Now the lates available iOS is 8.1.1. I bought my iPhone with iOS 7.0.4.
    I want to know what exactly happends when I "restore my iPhone" by iTunes. It will restore my iPhone to iOS 7.1.2 - this one which I currently use. Or it will restore my device to previos version of software (7.0.4)? Or it "restore" my device and also update it to 8.1.1?
    Please tell me what will happens. I'm asking because I won't to update my device and also don't back to previous soft.
    Best Regards,
    Pawel

    When you restore, your device is erased and the latest version of iOS will always be installed (currently 8.1, not 8.1.1). At the end of restoring, you'll be prompted to load your last backup, or not load a backup (i.e. starting fresh). After that, if  you chose to load your backup then all your apps, music, videos, etc. will be re-loaded .... it may take awhile, so give it time and don't unplug or interrupt the process.  BEFORE you restore, make sure you initiate a backup to iTunes (not iCloud) and that is normally offered right when you start the restore process -- be sure to do that if you want to recover your settings, accounts, app data, etc.

  • What do IPSEC mean under Security - AAA - Radius - Authentication

    I can't find exact information regarding the IPSec checkbox in Security -> AAA -> Radius -> Authentication.
    On the Cisco Wireless LAN Controller Configuration Guide 5.1, it says "Check the IPSec check box to enable the IP security mechanism, or uncheck it to disable this feature.
    The default value is unchecked."
    What is exactly mean by IP security mechanism?
    Does this mean that I can terminate VPN client over my WLC?
    Take note that this options appeared even though no crypto card installed in my controller.

    This is old code from the Airespace days. There used to be a VPN module that would ride in the WLC. No longer supported, well can't buy it new, but if you had one already...you get the idea.
    HTH,
    Steve

  • SCCM 2007 BDP Status Exact Meaning

    What are exact meaning of BDP Status below (0,1,2,3,4)
    BDP_Status
    When
    Status = 0
    Then 'Healthy' 
       When
    Status = 1
    Then 'Warning' 
       When
    Status = 2
    AND AvailabilityState = 3
    Then 'Critical' 
       When
    Status = 2
    AND AvailabilityState = 4
    Then 'Very_Critical'  
    Fazal(MCTS)

    Thanks For the Response , sorry for unclear.
    Got From our SCCM SQL DB , [dbo].[vSummarizer_SiteSystem] view.
    select * from [dbo].[vSummarizer_SiteSystem] then AvailabilityState filed (Column) shows with 0,1,2,3,4 integer result. (above is our query part which we are getting for finding BDP Issue)
    and i need to what are those value and meanings ( 0,1,3,4)
    Fazal(MCTS)

  • What is exactly cumulatins wage types

    hai to all
    can anybody clarify these doubts,
    what is exact meaning of cumulation wage types
    advance thanks
    kumari

    Cumulating Wage types is a wage types where you can cumulates two or more different wage types ie to cumulate into one.
    Perfect example is Groos salary is a cumulating wage type
    Refer here for more explanation
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c2/1c4e33b74f11d2b427006094192967/frameset.htm

  • What Unverified really means on av.AccuracyCode?

    I have been running some tests with AV and found that most of the addresses I'm trying come out with the av.AccuracyCode of Unverified. I can't find much documentation of what this exactly means but I also noticed under the accuracy code the data was "Identified and Parsed".This leads me to believe the data was actually matched against the global address repository but OEDQ was not able to verify the address. Example for: United States California San Francisco the av.AccuracyCode was: U00-I22-P0-100. The I under I22 means Identified and Parsed. Could anyone confirmed the data was matched against the AV global repository? In my case this is sufficient to say the data provided was valid (since it matches with true data) no matter there was no complete address to be verified. I have search in all the Oracle documentation and have not found anything. I did find a way to understand the av.accuracycode through the www.loqate.com website.
    Help Please!

    Hi,
    An unverified result where the address could be identified and parsed means no part of the address could be verified, but the data was recognized as address data and formatted using lexical rules.
    A guide to the accuracy code is included in the OEDQ online help, installed on the server but also available here:
    http://www.oracle.com/webfolder/technetwork/data-quality/edqhelp/Content/processor_library/third_party/address_verification.htm
    Note that AV needs some clue as to the country of the address if it is going to verify any part of it. If this is not present, use OEDQ to add it. For example, the Address Clean service that comes in the Customer Data Service Pack has a default country that you can set if no country is specified. Also, of course, the data for the relevant country must be installed.
    Regards,
    Mike
    Edited by: MikeMatthews on Nov 6, 2012 1:10 AM

  • What exactly is offline website data and what does it mean to clear it?

    What exactly is offline website data and what does it mean to clear it? For what purposes would I clear offline website data?

    http://forums.mozillazine.org/viewtopic.php?f=38&t=2485643
    Offline Website Data • MozillaZine Forums
    https://answers.yahoo.com/question/index?qid=20090501154657AAdwK5U
    Question about Offline Website Data.? | Yahoo Answers

  • What is the exact mean of  classname.class.

    what is the exact mean of classname.class. what situations it will be use ful . how to use . give me one example .

    Each class, interface, or enum loaded into the JVM has an associated Class object. This contains a lot of information about the class in question, including lists of fields and methods. <classname>.class gives you a reference to the Class object of the class mentioned.
    See the java.lang.Class javadocs for all the things you can do with a Class object.
    For example:
    theImage = new ImageIcon(MainClass.class.getResource("item.png"));to retrieve an image file from the directory containing the MainClass class file.

  • What exactly means Linked Subreport?

    <p>What exactly means Linked Subreport?</p><p>When i create a primary report with fields customer id & Country and subreport with Customer id & Lastyear&#39;sSales and try to link the subreport by selecting Customer id the subreport shows only the data for last record from primary report.</p><p>Not clear about the linking subreports...</p><p>Linking should show all the fields matching for Customer id or only the last record?</p><p>Need an detailed explanation as is it is not clear... </p><p>&#160;</p>

    Firstly,
    Is it on Demand-Subreport?... If not where are you placing the subreport if it is in Report Footer it will show only last record for data from primary report.
    Place the Subreport in Details Section and you will see the corresponding records for the Customer ID but before that you have to link it on Customer ID.
    Thanks
    Rahul

  • ABAP Certification - What exactly means the "dynamic programming" topic?

    Hi all,
    Actually i´m studying for my ABAP exam and i´d like to know what exactly means dynamic programming(of ABAP Advanced topic, take a look at http://www50.sap.com/useducation/certification/curriculum.asp?rid=493&vid=5).
    Is it only about creating a new program dynamically? or anything else? I just want to know where will be my focus on it.
    thank you!
    André

    Dynamic programming could refer to a number of things, but here I assume that it refers to such things like, creating a dynamic internal table at runtime, and/or using RTTS, or it could mean, simply using fields symbols.
    Regards,
    RIch Heilman

  • What exactly mean by manual reports

    Hi
    Can anyone tell me what exactly mean by manual reports and what do you mean by automatinng those manual reports...does it mean scheduling those reports.
    Thanks

    From my experience, manual reports, for example, are created in a tool like Excel.
    A business analyst will extract data from a source system and create a report in Excel for other business users. This often happens for Monthly and Quarterly reporting cycles.
    Many businesses are choosing Oracle Hyperion to automate this process.
    Using a system of servers and software Oracle Hyperion can extract data and create reports automatically. This helps to improve efficient as well as data quality and allows everyone to analyze the same values the same way across the business.
    Does this help?
    Brian Chow

  • What is the exact meaning for Screen Texts, GUI Status & GUI Titles

    What is the exact meaning for Screen Texts, GUI Status & GUI Titles and where we can find in SAP.
    What is called as these : Screen Texts, GUI Status & GUI Titles
    Kindly let me know.
    Akshtiha.

    Hi Akshitha,
    <b>Screen text</b>:They are labels that you can display beside your selection-screen parameters/select-options.. from the ABAP editor, use the menu option Go to> Text Elements>Selection Texts.
    <b>GUI STATUS</b>:go through this link
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba99935c111d1829f0000e829fbfe/content.htm
    <b>gui title</b>:The GUI status and GUI title are interface elements of screens. You create both of them using the Menu Painter in the ABAP Workbench. On screens, GUI statuses of type dialog status are used.
    Thanks
    Vikranth Khimavath

Maybe you are looking for

  • IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

    After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

  • Vendor issues (trading partner and bank account)

    Hi Experts, I need your advise on the following topics 1. we were trying to update the bank details of a vendor. However, we are going to use a 20 digits bank number for russia usually its only 18 digits (RUXXXXXXXXXXXXXXXXXX). in the customizing in

  • CC&B functional question

    Hi, is it possible to apply or maintain a credit to account instead of service agreement ? For Example, Requirement is to give $50 credit to an Account X. This credit should be utilized by all the service agreements in that account as per payment dis

  • SAP implementation for the first time

    Hi, I'm still new to SAP and need to know a few things... Could someone help me with the answers of the following questions? 1) What happens when a company goes through an SAP implementation for the first time. 2) how the company goes into project mo

  • Creating more Workbench requests

    Hai all,             I have a question. I am making several changes in SAndbox. For each changes, the system is asking for a change request and I am creating a new one every time. Is this a good practise or does creating more no. of requests create a