What is fit gap analysis?

Hi
What is meant by FIT GAP analysis ? any example ,documents?
What is cut short methodology ?
Pls full points will be rewarded.
Send details at :[email protected]
Message was edited by:
chandrakanth nammi

HI , refer below reward if helps, sent the mail
Fit gap analysis as the name says it is not a complete upgrade doc. to fit in the gap between the new and existing system from which we are going to migrate to the new system we run an compare and document in the changes that need to be preformed in then new system.

Similar Messages

What are the GAP analysis? could you pls... explain with examples?

hi everybody.....
may i know what are the GAP analysis with examples?
thanks in advance...
and hope u will get it me that.

Dear arunteja vasan ,
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do.   For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Cut Over Plans
Detailed plans need to be developed for cutting over from the old system(s) to the new.   Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Train Users
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced.   Therefore the more effort you put into helping the users master the system early the better.
Do award points if you found them useful.
Regards,
Rakesh

Can you provide some real time example of Fit Gap analysis .

Hi all,
Can you provide some real time example of Fit Gap analysis related to Functional.
Regards
Reddy

hi,
In my opinion and experience both functional and technical staff playkey roles in the fit-gap meetings and in the subsequent review of thefit-gap deliverable (which lists business requirements, fits, gaps, andalternatives to fill the gaps). Ideally the technical staff possessessignificant functional / business experience at least with that moduleso that he/she can help determine the cost/effort/technical scope if acustomization or interface is the preferred way to fill a particulargap. The fit-gap goes a long way in determining the overall scope ofthe implementation or upgrade project and is a critical success factor.It also needs to be completed very early in the project so thatresulting customizations and interfaces can be designed, created, andunit tested before the system test phase.
Thx,
waseem

Fit Gap Analysis

Hi, can anyone give me some real time scenarios of gaps in SAP HR?

Hi,
Gaps in business processes can be identified based on available system functionality. It depends on each customer how they would like to handle the Gaps. Some like to change their process to fit the system functionality and avoid custom developments, some handle the gaps by developing a custom solution with in the system.
Here's a simple example:
If business requirement says - employee should be able to request Sick leave only in increments of 0.5 days at a time in ESS, R/3 settings will allow to record absences less than a day, but does not restrict with any messages to request in increments of 0.5 days.
So, business can choose to tell employees to record only in 0.5 day increment by avoiding the custom validation development in ESS, or create a custom validation in the ESS application, restricting the employee to record only in increments of 0.5 days.
Thanks,

Very urgent-gap analysis -two examples

please explain me with examples of gap analysis and how do you fill the gap
and also there are two movement types in schedule line cat , what is the purpose of two
early responders will be definitely rewarded
thanks & regards

GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Cut Over Plans
Detailed plans need to be developed for cutting over from the old system(s) to the new. Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Train Users
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced. Therefore the more effort you put into helping the users master the system early the better. Fit gap means, before implementing the SAP all the business data is in the form of documents, we cannot keep this data as is in the SAP. There should be a gap. So by filling this gap, we make configuration with the help of these documents. This is called as fit gap analysis.
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
Examples:
1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Ex, The functionality that is not present in Standard SAP and adding it to suit the business requirements. In Credit memo request document type, creating Credit block automatically for those Credit memos above Rs 5000.
***reward if this helps**

Sample tamplates on Gap analysis and Resolution

Hi Gurus,
Can any one send me sample tamplates on Gap analysis and Resolution. My Email ID [email protected]
Thanks & Regards
Sasikanth.Ch

<b>mail sent reward if helps</b>
<b>GAP Analysis</b>
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Cut Over Plans
Detailed plans need to be developed for cutting over from the old system(s) to the new. Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Train Users
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced. Therefore the more effort you put into helping the users master the system early the better. Fit gap means, before implementing the SAP all the business data is in the form of documents, we cannot keep this data as is in the SAP. There should be a gap. So by filling this gap, we make configuration with the help of these documents. This is called as fit gap analysis.
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
Examples:
1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
2 gaps are,In customer master data the client requirement needs legacy customer number which can be solved with User exit.,
In sales order we need customer Phone number,We can use userexit
These 2 are gaps which we cant find in Standard SAP
1. if client want new field in customer master like nearest fire station ..
2. order will be uploaded directly with out va01. through BDC... bcoz lot of orders if they get daily, they can opt these...
Movement type 1 uses when a material have two movement types.. like example 101 and 261.. one is incomeing raw material and and going for production...
Message was edited by:
SHESAGIRI.G

What is GAP ANALYSIS

dear all can u plz give a brief description on GAP anallysis

hi
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
nagesh

What is Gap Analysis & Break Analysis

Hello all,
Can anyone explain me what is Gap Analysis & Break Analysis with some examples pls.
Thanks in advance,
S N

Hi,
The gap analisys is the analisys on what are the difeerences between actul system and what the customer want to develop.
Gap analysis is some thing which is there in the business scenario but not available in the SAP process model.
Business blue print is the document containing Q&A database this is the second step in ASAP methodology.
Check this thread with ex.
Re: A bit confused with your Gap Analysis example
Break Analysis
http://www.tutor2u.net/business/production/break_even.htm
Assign points if useful
-Shreya

What are the tools for GAP Analysis.

What are the tools for GAP Analysis.

Hi
GAP Analysis :
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Please search, there are many threads and many times discussed this topic.
GAP Analysis
Re: gap analysis
Regards

What is meant by Gap Analysis

Hi all,
What is meant by Gap Analysis. Pls send any link or ducument which explains about this in detail.
Thanks and Regards
Nandha

Read this
http://www.sap-img.com/sap-implementation.htm
Re: blue print,gap analysis
http://www.qbsw.com/gap-analysis-sap
A

What are common error come in gap analysis

Hi,
Anyone can tell me, what common error occur in implementation and while how we can over come these error through gap analysis in sap hr.
Regards,
Manker

GAP Analysis and common Errors are different
GAP Analysis - While Implemention SAP HCM at the Cleint Place if you Find that kind of Scenarios Cannot be done through SAP System those are called GAPS those has to be clarified and find out the solution
Errors : This will come in the system if the configuratiion is worng
Please search the forum before raising the ISSUE
:check the use of SEARCH FORUM FEILD
thanks

GAP ANALYSIS AND TICKETS

hi Gurus,
I need some 6 real time examples relating to Gap Analysis and Tickets of SAP SD. Please could you send me all the details with the scenarios and solutions to my email if [email protected]
Thanks,
Farhan.

Hi Farhan,
Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprint [AS IS Process] stage.
A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and auctioned,
1. GAP must be closed and customized software can be developed
2. GAP must be closed but software cannot be written therefore a workaround is required
3. GAP does not need to be closed.
A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirement and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
Examples:
1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
A2. A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can and can't do. For each gap there will be one of three outcomes which must be recorded and actioned.GAPs must be closed and therefore customized software can be developed to close the gap. In some cases GAP must be closed but software cannot be written therefore a workaround is required in other words a business process change is recommended to the client.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications (ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

How to do GAP analysis ?

Hi Experts,
How to do GAP analysis ? I have a BW problem statement about SD module. I have to do a GAP analysis. I am doing it for the first time. So any suggestion about the approach to start it ?
Thanks

The gap analisys is the analisys on what are the difeerences between actul system and what the customer want to develop.
GAP Analysis in simpler terms refers to study of existing state of system and desired state of system, there by identifying the gap between states. In the context of SAP, GAP analysis is very important before implementation of SAP system. The implementation team should study what is that an SAP system can provide for each business process and what is the actual business process. One should evaluate each such gap and should find out the ways to fill the gap. The gap might be filled in different ways: System enhancements, custom ABAP code development, interfaces with some other external systems. etc.
In the Enterprise Systems field, GAP Analysis is a process done while bleprinting the solution and aimed to discover the gaps between the user requirements and the "off-the-shelf" (or packaged) solution. For example you want to implement an ERP system , you do a GAP Analysis to assess gaps between the processes supported by that System and the process as executed by the organization that will be implementing the solution.
In the SAP BI area, we do a GAP Analysis to map between our logical and physical BI solution design and the Business Content that SAP offers. Business Content is a set of preconfigured BI objects aimed to save us valuable time when developing BI solutions by providing the "best practices" for that functional domain.
The reason we do a GAP analysis in BI is to find out whether we can save ourselves a lot of time by implementing a Business Content solution instead of developing from scratch.
In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business BlueprintAS IS Process stage.
A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
1. GAP must be closed and customised software can be developed
2. GAP must be closed but software cannot be written therefore a workaround is required
3. GAP does not need to be closed.
A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
Examples:
1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
for more info check these links
Re: A bit confused with your Gap Analysis example
http://www.9000resource.com/what_is_gap_analysis/what_is_an_iso_9001_gap_analys_1.php?gclid=CMKw-6fh0YoCFRsRQQodczGGew
http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/Management/ASAP_Links.html
Re: gap analysis

GAP ANALYSIS URGENT INTERVIEW QUESTIONS PLEASE .

Hi Everybody ,
Tell me more about GAP analysis and business requirements ? why it is required ? why it is need and some really scenario .
thanks - Sameer .

Here is Some useful info given earlier on SDN Forum on GAP Analysis:
Simply Gap Is Nothing But,
Client Requirement Doesnt Meet With The SAP Application,
The Distance Between Actual And Existing/Supporting,
E.g.: On Purchase Of Material-X, The Other Material Will Get 50% Discount, Which Sap Doesnt Support,
Commission Paid To The Agent Also , Not Supported In SAP,
To Fill This Gap, We Use The Enhancements,
These Enhancements Divided Into Exits,
Like
User exits,
Field Exits
Screen Exits &
Menu Exits.
These Enhancements Used To Update The Standard Program In Its Respective Business Transactions, Used As A Gateway To Meet The Client Requirements.
Refer below
In n simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business BlueprintAS IS Process stage.
A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes, which must be recorded and auctioned,
1. GAP must be closed and customized software can be developed
2. GAP must be closed but software cannot be written therefore a workaround is required
3. GAP does not need to be closed.
A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirement and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
Examples:
1. MGM Studios and Lycos sometime back worked with SAP to develop its new intellectual property management and media advertising management functionality, respectively.
2. A leading Oral care product company wanted the promotion of free-goods where they wanted 'Buy one get 2 different products free'.
gap analysis
Gap analysis?
Gap Analysis
Regards
Bala

Template doc regarding Gap analysis of SAP BI -MM

Hi Gurus,
Can any one send a template doc regarding Gap analysis of SAP BI -MM

HI,
Gap Analysis:
In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprintstage.
A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
1. GAP must be closed and customised software can be developed
2. GAP must be closed but software cannot be written therefore a workaround is required
3. GAP does not need to be closed.
A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
GAP Analysis
Re: gap analysis
Re: gap analysis
Tarak

What is fit gap analysis?

Similar Messages

Maybe you are looking for