What is 'fseventsd' when monitoring cpu in the activity monitor?

what is 'fseventsd' when monitoring cpu in the activity monitor?

The .fseventsd is the file system events storage location.
Since it writes file system event log files and since applications such as Time Machine use it, I would not stop its process.
Here is some background info.
http://arstechnica.com/reviews/os/mac-os-x-10-5.ars/7

Similar Messages

  • What can be preventing me to see the activated multiprovider in BEx?

    Hi,
    So I have two different multiproviders in Netweaver 7.0 all activated; all under the same infoarea. In BEx, when I try to open to queries attached to these multiproviders, one comes with its queries transported from BW 3.0 but the second multiprovider does not appear in BEx when I searched under InfoArea, let alone see the attached reports.
    What can be preventing me to see the activated multiprovider in BEx?
    It is some setting in Netweaver, I will appreciate stepst to fix it.
    [Note: after the transport, one of the multiproviders had activation problem and was fixed by adding char and key figure, activing update rules, etc... just in case these hints will help you to guide me ]
    Thanks

    Amanda,
    Make sure the second Multiprovider has queries. If you had problems in the activation and queries were included in the same transport, most probably they were not copied.
    Maybe you need to retransport the queries.
    Not having queries would be the only reason for it not to show in the BEx tree, as far as I know.
    Regards,
    Luis

  • TS1814 I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to i

    I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
    If the problem persist, contact apple support at apple.com/support
    I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.

    These are the steps mentioned in the article iPhone: Troubleshooting activation issues
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.

  • HT4623 Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same.

    Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same. Help me please! T-T

    Please see the  More Like This  section on the right.

  • What is a "logged in user" on the "Active Sessions" report in CF8 Server Monitor?

    I was looking at the Active Sessions Report (The Chart View) and saw I have more "logged in users" than "active sessions".
    I had expected them to be nearly the same.    It's on our Intranet where I log users in (using cflogin and cfloginuser) at the begining of their session and users should be logged when the session ends.
    I couldn't find a detailed explaination of what a "logged in user" means.   There is a chance that the same user is logged into a nested application as well as the Intranet, but I don't think that is what I'm seeing.
    I also don't see a way to get a list of what CF is counting as a logged in user.  I can only see a way to get the total count.
    Any help is appreciated. 
    Thanks,
    Jeff

    Thank you Michael for the reply, but I don't think that is the issue.
    When a user opens their browser on the intranet, a session begins and they are logged in (using the cflogin and cfloginuser).    If they close their browser, the session should hang around for 20 min. (per the server setting).   I am assuming this is still considered an "Active Session" since I can see this behavior in the report.
    At first, the Active Sessions and Logged In Users are exactly the same.   When the sessions start to time out, the active sessions are reduced,  but the Logged In Users remain the same.    Then,  after a while, they start to move together.  So I have more Logged In Users than Active Sessions.
    I left the Server Monitor open last night and for most of the night, I had 0 sessions, but 57  "logged in users".   This morning, as people opened their browsers, the Active Sessions and Logged In Users moved together.   The gap of 57 looks consistent.
    It looks like people are remaining logged in after their session ended.
    I am really looking for a detailed explaination of "active session" and/or "logged in user" as used in the server monitor.  It would be really nice to find a way to list the details about each item counted in the "logged in user" and not just the total count. 
    Thanks Again for your reply.
    jsm

  • What things can you close down in the activity monitor? Without messing something up.

    Im just wondering what you can close down in the activity monitor without messing something up.

    Basically, only the items which appear in the Dock. Quitting unfamiliar processes should only be done as a troubleshooting step and when instructed.
    (117545)

  • How do I stop ALL tabs from going dim when Firefox is not the active WINDOW?

    I think I have read every single post about changing active tab colors, etc, etc. However, where I am frustrated seems to be a little different.
    When Firefox 31 is not the active WINDOW the whole tab bar goes grey (just like the title bar) and the only tab I can read the title of is the active tab. I need to be able to see ALL tab names.
    I don't want to use any add-ons. I just want a simple userChrome.css or about:config option. I have other UI complaints, but this is the only one I care enough about to do anything about. It is making me less efficient, confused, and frustrated.
    Can anyone please help?

    That's good to hear. Good work. Please go to your last post and
    flag it as '''Solved the problem''' so others will know what to do.
    Also, if you want help for the other issues you spoke of,
    Just ask. Good day.

  • I am installing Itunes after a cpu restore and am getting this error reading "the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version and this is what i get when i try open the program

    Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
    the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
    Cheers
    Andrew

    Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
    dlrobinson49 wrote:
    I guess I must have had a newer version ofiTunes on my defunt eMac....
    That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

  • HT201412 I am reading an e-book and the screen has become blurred to the point that you cannot even see the letter. I checked the e-book in another computer and can be seen without problems. What's worst, when this happens all the web sites have the same

    I am reading an e-book and the screen has become blurred to the point I cannot see the letters. Other pages are patched grey. I checked the ebook in another computer and it shows no problem. Also, when this happens, other web sites get blurred or patched. Do you know what can it be?

    You can try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. See if that helps.
    But if it doens't or if hte issue repeats you may want to make an appointment at your local apple store and have them check it out.

  • How do i permanently change my homepage to what I want when I look in the troubleshooting tab and find a unchangeable flag called: browser.startup.homepage_override_url

    I downloaded some apps from speedbit.com and told FF4.0.1 to not change my homepage, and it did anyways to speedbit. It also installed itself on the "override", so everytime i reset my home page to anything, when I next open FF it bumps back to the override page instead. In troubleshooting it is a toggle i can't edit.

    Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
    You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • What To Do When Upgrading Version of The App

    I' ve a BB App based on QNX. While upgrading version, BB World gave the following warning, although i' ve upgraded the version parameter in bar-descriptor.xml and in the name of bar file:
    File bundle (udts_sistek-2_0_3_1.bar) has been rejected. Package ID is required for all .bar file. If this is an upgrade, Package ID must match Package ID in original file bundle.
    Because of i haven' t got any keys which i used them to sign the previous release, i suppose that the only way is uploading new release as new application. Am i right? 
    In addition what do i need for the next upgrade? Is backup file ('Preferences > Signing' in Momentics Ide) enough?
    PS : I' ve read the following tag which is not reply to my question.
    http://supportforums.blackberry.com/t5/Adobe-AIR-Development/File-bundle-has-been-rejected-Package-I...

    Apple supply Samsung, Hynix, Nanya and Micron (which is Crucial) as standard, so any of these should work as if supplied by Apple. Samsung ram usually has a lifetime warranty - but it is always possible to get a faulty chip from any manufacturer. Shop around and work out the cost/benefit of buying from a 3rd party. Sometimes it pays to upgrade from 512mb to a single 1gb from Apple, sometimes it's cheaper to buy 2gb elsewhere and factor in the resale value of the original chip.
    The 1gb Samsung chip is M470T2953CZ3-CE6
    Good luck.
    PS - FYI this question has been answered hundreds of times already in this forum.

  • What to do when Verizon server on the route is almost always timing out?

    Nine times out of ten, the server at the 3rd external hop after the packet leaves my router is timing out, and my surfing speed is not good.  It's a Verizon server, juding by the IP address that appears in this slot on those occasions when it does not time out (130.81.xxx.xxx).
    Is there a way to file a trouble ticket?

    See my other message about timeouts in trace routes often being meaningless.

  • What to do when water gets in the back of the computer

    water got into the back part of the macbook pro we have been charging it but it wont wake up? what do I do, i got a hair dryer and tried to dry it I dont know but i had everything on that cumputer and now its not working it and would be amazing if it came back!???

    Take it to an Apple Store.

  • What does "/"  "\" mean when using it on the Timeline?

    Learning Adobe premier pro classroom CC

    The "\" key zooms into the timeline. So if you can't see all of your clips because you are zoomed in too far, the "\" will set your view to fit to the visible area of the timeline.
    The "/" key marks the selection.
    In the future, the best way to get that information is to go into the Edit menu, select Keyboard Shortcuts, and type in the keys you want to know more about. It will show you what action is related to the key you enter and if no action aqppears then you know that key or key combination is available for you to assign to something.

  • What to do when i have lost the email with the serial number on??

    as it says above, i downloaded and biught CS5 from adobe last year, and have lost the email with the serial number on and i need to reload it onto a new machine. all emails from adobe were lost during a breakdown of my laptop.
    could someone shed some light as to how i get this serial number back? i do not want to have to buy photoshop again! it costs enough as it is!

    You will find your serial number in your account only if you have registered your copy with Adobe. If you haven't done that, the only way is to call customer support and see if they can help. (http://www.adobe.com/support/contact/)

Maybe you are looking for