What is full request? and repair full request?
Hi experts,
please let me know what is full request? and repair full request?
Hi Suman,
Delta loading not possible if FULL requests already available in ODS from same datasource & souce system combination, In order to delta's FULL requests should be changed to Repair FULL full requests. Then system allows Deltas.
<a href="http://sapbwneelam.blogspot.com/2007/09/how-to-do-delta-loads-after-full-loads.html">Repair Full Request</a>
Hope it Helps
Srini
Similar Messages
-
Diff between init with data transfer and repair full request
hi,
i have observed that even in the new flow we are doing init without data transfer and then repair full request
if i do init with data transfer also i can achieve the same?
i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
please suggest meHi Venkat,
A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data) -
I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?
See this previous discussion:
https://discussions.apple.com/message/16962474#16962474 -
On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?
A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared. -
Please help me answer this QUestion-
My Itunes "Capacity" bar says my ipod is full of "other" witch is the yellow bar, When i sync it says i only have 7GBs left, WHAT IS THIS "OTHER" and how do i get rid of it??Please help me answer this QUestion-
My Itunes "Capacity" bar says my ipod is full of "other" witch is the yellow bar, When i sync it says i only have 7GBs left, WHAT IS THIS "OTHER" and how do i get rid of it?? -
Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.
well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day
-
I am getting a message that states "startup disk is full". What does this mean and how do I fix it?
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Everytime i try to sign into my iTunes account, it says: We could not complete your iTunes store request. An unknown error has occured (0x800B0101). What does this mean and how can i fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
I purchase a movie on iTunes, when I tried to view I get error massage, requested ULR is not found on server. What does this mean and how can I view this movie.
familyfromapo wrote:
The movies are Dexter that we purchased at a store. He uses the Air and since it does not have the disk option this is how we were hoping he could view his shows. We had no idea we would be breaking the law....just wanted to put all of the movies we have purchased on the external solely for the intent of our viewing.
Thank you for your time and help.
Sorry.
It is illegal to break the encryption to copy a dvd.
Judge: DVD-copying software is illegal - CNET News
Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
MPAA Says Making Even "One Copy" of a DVD is Illegal -
my iPhone is almost full, but I can't see what is on it, and what to remove. In iTunes a yellow bar ("other") - anyone knows what that might be???
Hi, thanks for your input.
Unfortunately I still have 10.81 GB Other-stuff on my iPhone. Even after restoring the whole thing....
I looked in Settings > General > Usage, and it seems that it was only Programmes that was resuced after cleening that up.... HOPE you have more surgestions!? -
When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?
Hi IG viper,
Placing your iPod into recovery mode should allow you to successfully restore the device.
You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Sincerely,
Allen -
HT201210 startup disk is full-what does this mean and what do I do?
When syncing my iphone I get an error message that said my start up disk was full. Now it won't backup my phone to my computer. What does that mean and what do I do?
Click on your hard drive once. Then File > Get Info. What does it report there for space (capacity and "available")? Have you emptied the Trash (Finder > Empty Trash)? If you have truly filled up you hard drive then it is critical you copy files off onto an external hard drive soon. Macs need a lot of free drive space at all times and you may experience frequent crashes, slow down, and file loss if you don't free up space (15+ GB at all times at least)..
-
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I do not seem to be upgrading to IOS 5.01 correctly - twice I have connected to my computer and received notification that all current upgrades are being added but when I try to download apps that require 5.01 I am told that I do not have a system that is upgraded for this. What is the problem and how do I remedy it?
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
GOAL: Present video demonstrations of aviation engineering spare and repair objects for re-engineering and Request for Quotes.
SPECIFICS: Would like to present with interactivity capable to rotate objects.
CURRENT SOFTWARE: entire CC Master Collection
EXPERIENCE:
Photoshop CC (Advanced)
Illustrator CC (Advanced)
InDesign & Copy CC (Advanced)
Dreamweaver CC (Advanced)
Flash with ActionScripting CC (10 years ago -- still retain some knowledge but would need a Refresher Learning Curve)
Premiere Pro CC (Beginning)
After Effects CC (Beginning)
Audition CC (Beginning)
Speed Grade CC (Beginning)
QUESTION: What integrated media software will allow me to accomplish GOAL? . . . currently strategizing learning curve for production plan.
Please, advice. Sincerely, Idaglia Florezyou could do that with javascript and html.
but it would be more work unless you used a tool like flash to create those files. i'm not sure what the security issues with flash are, but i can't see any security issues with javascript and html either whether created by flash or done without a tool (like flash or edge etc).
Maybe you are looking for
-
I am going to make a playlist on iTunes. I have $40 which was gifted.to me. Now I want to gift a playlist and not use my account credit card. How do I do that. Thanks in advance.
-
Bug in InDesign CS4: Undoing Gradient Change Requires Extraneous Undo
Create a shape with a gradient fill. With the shape selected, drag a color swatch to the gradient bar to add an color to the gradient. The gradient fill of the shape is appropriately updated. Hit undo. The shape now inexplicably has a solid fill of t
-
Hi I recently purchased a new MacBook and am currently using the free trial of iWork. I have plenty of info backed up on a disc from my old computers. I have just recently tried to access my old documents but some of them open in text edit and are al
-
Trik to change video player in youtube
how many no. Of video players are there in nokia 5800 music expres for youtube. and how can i change them from each other
-
Hi, I installed Solstice X.25 9.2 and patch 124413-01 in the global zone. At firs I started successfully x.25 in the global zone. <10/31/08 08:01:26> Starting the X.25 software - please wait <10/31/08 08:01:26> X.25 : Creating link 0... <10/31/08 08: