What is global Area and why is depreciation Area 01 considered global Area

Hello Forum,
What is global Area and why is depreciation Area 01 considered global Area
Thanks
Best Regards
D. Swathi

Similar Messages

HT1349 I updated my iphone (G3) and all of my apps are gone! What can I do and why did this happen?

I updated my iphone (G3) and all the apps are now gone! What can I do and why did this happen?

Did you perform the update on a computer other than the one you normally sync to? Were the apps in the iTunes library on your computer BEFORE you performed the update?

HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

What is 'Backing up' and why does it take so long even if my library is identical to my ipod?

I've just plugged by ipod touch into the computer to sync it and it keeps telling me the ipod contains stuff that isnt in my library (eventhough my library is identical to the content on the ipod) and that if i dont back up i will lose this stuff, i clicked back up and now it has been backing up for over 2 hours! what is it doing and why is it taking so long?

TC has to check to see which files need to be backed up. So its going thru the file directory and looking for any changes since the last backup. Do you have a lot of files on your Mac to check? Or are they just a small number but very large. If its the former, then that might be the culprit.

What is a url and why is it needed to use photoshop

What is a URL and why do I need it to use photoshop on my computer?

what problem are you seeing?

Photo/Video editing PC build; what would you change and why?

I'm in the planning phase of my first photo/video editing PC build. I've done quite a bit of research to this point, and I've finally come to a decision on all of the components (I think). After seeing how helpful everyone is on this forum, I decided to post my plan and see what everyone thinks.
Miscellaneous info: I am an amateur photographer looking to expand my horizons and venture into the video realm. I will be running Windows 7 64bit with Adobe CS5 Production Premium and Lightroom 3 on a singe solid state drive and everything else will be on a 3 drive RAID 0 config. Eventually I plan on purchasing a RAID card and a few more drives for a RAID 3 (or 5) config, but that won't be for a while.
Ok, here's my planned build...
Component
Description
Processor
Intel   Core i7 - 950 3.06GHz Quad-Core Processor
Motherboard
ASUS   P6X58D-E LGA 1366 Intel X58 ATX Intel Motherboard
Memory
Corsair   Dominator 12GB (6 x 2GB) DDR3 1600 (PC3 12800) Triple Channel Memory
System Drive
Crucial   RealSSD C300 2.5" 128GB SATA III MLC Internal Solid State Drive
Data Drive(s)
3 - Western   Digital Caviar Black 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal   Hard Drive (Configured in RAID 0 for now)
Optical Drive
Pioneer   BDR-205BKS Blu-ray Burner
Video Card
EVGA   GeForce GTX 470 (Fermi) SuperClocked 1280MB 320-bit GDDR5 PCI Express 2.0 x16   HDCP Ready SLI Support Video Card
Power Supply
Corsair   HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified   Modular Active PFC Power Supply
Case
LIAN   LI PC-A71F Black Aluminum ATX Full Tower Computer Case
Monitor
NEC   MultiSync PA271W-BK-SV 27" Widescreen LCD Monitor with SpectraViewII   Color Calibration Solution
So, what would you change and why?
I'm looking forward to your responses!

"I'll take your advice and go with Samsung F3s. With the money I save (by not getting the WD Caviar Blacks), I'll add a 4th drive and use the RAID5 on the mobo until I can afford to upgrade to a proper RAID controller."
I might be a bit late, but wanted to let you know about motherboard software RAID configs (at least mine):
I have an older system running an ASUS P5AD2-E Premium MB containing a Silicon Image 3114 RAID chip. I originally configured a RAID 10 array with four 74 G Raptors for speed and redundancy. Figured if I lost a disc, I could just rebuid the array. Come to find out, the Sil 3114 chip does not support rebuilding the RAID 10 array.
I had lost a disc (disc was okay, just power to the disc was interupted) so was running on three. Fixed my power problem, went to rebuild the array and couldn't. So I figured what is the point of having a RAID 10 that I couldn't rebuild. Went to a RAID 0 with a backup disk.
Never checked the documentation to see if software RAID 5 through the SIl 3114 was rebuildable.
Mind you, I am not a computer guru nor all knowledgable about software/harware based RAID configs. But after talking to others who are the guru's, I found that I should stay away from the motherboard software RAID arrays and they mirror what Harm said about hardware RAID boards. But on a budget, the RAID 0 with a backup drive works for me.
Just my 2 cents to help.
Tony

What is application memory and why does my macbook pro keep running out of it?

what is application memory and why does my macbook pro keep running out of it?

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
          A long-running process with a memory leak (a kind of bug)
          Not enough memory for your usage pattern
Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
          View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

When I click on a picture or a link, to take a closer look, I get a blank screen and it says at the top search bookmarks and history, at the bottom it says 'stopped' - what is this problem and why is it happening

when I click on a link to complete a form, or a link to take a closer look at a picture, I get a blank screen and it says at the top 'search bookmarks and history', at the bottom it says 'stopped' - what is this problem and why is it happening ?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard?

What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard? Does it slow down my Mac? Seems like someting has slowed down my Downloads, Updates, Backups, etc. & I don't know how to locate the source or how to fix. Any Wizards avail to share some Wisdom? I am using Ethernet Cable/Port for Internet Connection, I Use a Seagate FreeAgent Go Flex Ultra-Portable Drive w/ Seagate's Firewire Adapter Cable.

If this is really Memeo Backup and you want to get rid of it for a better backup program like Carbon Copy Cloner the the following shows all the stuff that Memeo Backup installer installs (based on Memeo Backup 2.5.141 which I found with a google search and downloaded):
The primary file to disable Memeo Backup would be that file in LaunchDaemons. Remove it and reboot and the rest is just taking up disk space.

What is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears eveery time I restart mozilla.

what is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears every time I restart mozilla.

AVG reports these sqlite cookies each time firefox starts. they usually belong to tribalfusion or some other tracker. How do I block them in the first place. I thought firefox is a safe browser. Did not have this problem until I upgraded to 3.6.

What is flash player and why do i have to download it ?

My computer won't show any videos on safari because it says I need to update flash player. What is flash player and why do i have to download it? I thought flash player comes with your computer.

1. A browser plugin for Flash content.
2. Apple no longer bundles it with Mac OS X.
(119030)

What is a mackeeper and why does it keep popping up? I am brand new to mac. carol h.

What is a mackeeper and why does it keep popping up? I am brand new to mac. carol h.

Hi,
For maintenance.
http://mackeeper.zeobit.com/
Check your Applications folder. If you don't want the app, just drag it to the Trash.
IMHO you do not need this utility. Your Mac will do maintenance for you.
Carolyn :-)

What is "Directory Service" and why does it "use up 194%" ?

What is "Directory Service" and why does it "use up 194%" on my istat CPU app monitor?
Ever since I installed Leopard I've noticed this happening more and more - especially when I install an external hard drive or unplug my ethernet line - this is plainly weird and never happened under Tiger - the temperature shoots up to 84° also - I always to a restart to get rid of it but it's kind of worrying....anybody have any ideas?
Message was edited by: Host

Had this happen myself.
It does have something to do with Spotlight/searching. Should go away after a while, or so I have heard from other users, 'cause it hasn't stopped driving me and my fan mad yet.
Am going to have my MacBook index and follow-up on indexing and whatever else it feels is necessary to finally allow me to search in peace over the weekend while locking it away where I can't hear it.
Hopefully that does the trick.
If it wasn't for things working better/faster and most things looking better I might actually consider taking Leopard off again ...

When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive. What is that? And why can't I delete it?

When I open my files to download my pictures from my iphone 6 plus, there is a windows icon with a hard drive. What is that? And why can't I delete it? I already reset my phone and a week later they came back.

I download my pictures by:
!) Connecting my iphone to he computer.
2) It will open a window or I will go to my computer and select iphone device.
3) Open up Iphone folders and download.
When I do that, I see a windows icon, with what looks to be a hard drive. And when I click on it, it leads me back to my desktop. Right now, I only have one. I know by tomorrow I will have more. It just keeps spreading.

1.how can I interpret meaning of TARGET STATE in output of command crsctl stat res -t 2. what exactly is nodeapps and why it need to be stopped before any maintenanace activity.

I have two question requesting from the Gurus.
1.how can I interpret meaning of TARGET STATE in output of command crsctl stat res -t 2. what exactly is nodeapps and why it need to be stopped before any maintenance activity.

I'd tried deleting my user preferences before, and it didn't seem to help. However, I tried again, and also removed the couple of actions I'd had in ~/Library/Automator. Success! Just for good measure, I tried putting the actions back and restoring the old preferences file, and everything still worked. Huh. But that's the nature of these things, I guess. At least it works now, thanks!

What is global Area and why is depreciation Area 01 considered global Area

Similar Messages

Maybe you are looking for