What is going on with tethered support for the canon 70D?

I just saw the release of Lightroom CC, and it appears that the Canon 70D is still not supported for tethering. This camera has been on the market for almost 2 years, and there have been several releases of Lightroom, including this major one. What is going on here? This is a major feature that is missing and a huge inconvenience to workaround. When will this be fixed? What is holding it up?

This information is a couple of years old, so I can not vouch for how current it is. But it may be worth a try.
ColdFusion's Dedicated Account Managers
October 9, 2007
http://www.forta.com/blog/index.cfm/2007/10/9/ColdFusions-Dedicated-Account-Managers
Just a reminder (especially for those of you whose experiences when calling Adobe sales regarding ColdFusion were anything less than stellar) ...
Adobe has dedicated ColdFusion Account Managers (in the U.S. and Canada), all they do is ColdFusion, and they can help with purchasing, EULA and pricing questions, and more. Here are the contact details:
For users in AK, AR, AZ, CA, CO, HI, IA, ID, IL, KS, LA, MN, MO, MT, ND, NE, NM, NV, OK, OR, SD, TX, UT, WA, WI, WY (West of the Mississippi), ping Jason Graves at [email protected] or call (858) 847-7541.
For users in AL, CT, DC, DE, FL, GA, IN, KY, MD, MA, ME, MI, MS, NC, NH, NJ, NY, OH, PA, RI, SC, TN, VA, VT, WV (East of the Mississippi) as well as Eastern Canada & Ontario, ping Dominick Conte at [email protected] or call (858) 847-7451.
[revised]

Similar Messages

What is going on with technical support?

I have been on the phone for over 2 hours trying to get ahold of technical support. Then I get disconnected and need to dial back in.
What is going on with technical support? The handful of times when I needed to open a trouble ticket with ADOBE, it was a reasonable amount of time.
I hope this is not an indication of the current direction of the company. I have used Coldfusion for over 8 years and have never had such a horrible experience.

This information is a couple of years old, so I can not vouch for how current it is. But it may be worth a try.
ColdFusion's Dedicated Account Managers
October 9, 2007
http://www.forta.com/blog/index.cfm/2007/10/9/ColdFusions-Dedicated-Account-Managers
Just a reminder (especially for those of you whose experiences when calling Adobe sales regarding ColdFusion were anything less than stellar) ...
Adobe has dedicated ColdFusion Account Managers (in the U.S. and Canada), all they do is ColdFusion, and they can help with purchasing, EULA and pricing questions, and more. Here are the contact details:
For users in AK, AR, AZ, CA, CO, HI, IA, ID, IL, KS, LA, MN, MO, MT, ND, NE, NM, NV, OK, OR, SD, TX, UT, WA, WI, WY (West of the Mississippi), ping Jason Graves at [email protected] or call (858) 847-7541.
For users in AL, CT, DC, DE, FL, GA, IN, KY, MD, MA, ME, MI, MS, NC, NH, NJ, NY, OH, PA, RI, SC, TN, VA, VT, WV (East of the Mississippi) as well as Eastern Canada & Ontario, ping Dominick Conte at [email protected] or call (858) 847-7451.
[revised]

What is going on with Forms Central? The whole systems seems to be down.

What is going on with Forms Central? The whole systems seems to be down. And why has my login window for the last few months become so small its almost unreadable?

tgostkowski1 wrote:
>> And why has my login window for the last few months become so small its almost unreadable?
I don't understand what you mean by this. Can you please elaborate and/or include a screenshot?
Thanks,
Shannon

When will the Camera plug-in be updated for the Canon 70D for Elements 9?

When will the Camera plug-in be updated for the Canon 70D for Elements 9

Hi,
There hasn't been an update for PSE 9 since Sept 2011 so it is unlikely to ever be updated for the 70D.
Your options are
1) Upgrade PSE 12 when it comes out (probably soon)
2) Use the Canon software (DPP) that came with your camera - convert to TIF files and import those into PSE
3) Download/Install the free Adobe DNG 8.2RC Converter to convert your CR2 files to DNG files - the DNG files can then be processed by PSE 9
Brian

What's going on with web support sites not responsive/slo

What's going on with all the creative servers?
http://us.creative.com/support/downloads/
this is slow
creative.com
is slow
soundblaster.com
is slow
etc.

Duplicate.
Jason

WIA support for the Canon MX922

Is there a WIA driver for the Canon MX922 multifunction printer? It doesn't respond to my version of Photoshop which requiresa scanner that is WIA compliant.

Hello.
The MX922 uses a TWAIN driver for scanning.
For many of the latest versions of Photoshop, a TWAIN plugin would have to be installed in order to use a TWAIN scanner with the program. Please visit www.adobe.com for information on how to update the plugin for your version of Photoshop.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When is Lightroom going to have tethering capabilities for the Nikon D810

I have a Nikon D810 and would love to tether it, When or how can i do this?

Hi GregoryAndreyev!
The imageCLASS D530 drivers for the Mac OS X Mavericks operating system are available at the Canon USA website. Please click the link below to download and install the drivers:
imageCLASS D530 - Drivers & Software
I hope this information is helpful to you. Should you need immediate assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Now Here! Support for the Canon PowerShot G1

After much trial and error, I have figured out how to support the Canon PowerShot G1.
I started with the settings for the hacked un-supported G2 (thanks to user jpugsley for this message: http://discussions.apple.com/thread.jspa?threadID=262930). Then I read the source code to the open source dcraw.c command line raw convertor. There I found Adobe's translation values for the G1 which has a CYGM filter array. I'd say this opens up opportunities for many other CYGM cameras to be supported.
The premul values seem to affect the color balance of the images. Adjusting the values very slightly may be helpful. I don't know what most of the other values are. The m2 array values came from dcraw.c You probably shouldn't touch those.
The images seem to open fine in Preview and Aperture. I hope Apple officially supports this camera soon (Aperture 1.1?).
How To:
All you have to do is paste the following XML into this file (make sure you save a backup of the file first). Rebooting is NOT needed:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fram ework/Versions/Current/Resources/Raw.plist
<key>Canon-PowerShot G1</key>
<dict>
<key>blackReplace</key> <true/>
<key>black</key> <integer>32</integer>
<key>max</key> <integer>1023</integer>
<key>white</key> <integer>1023</integer>
<key>premul0</key> <real>1.00</real> <key>premul1</key> <real>1.2</real> <key>premul2</key> <real>1.1</real> <key>premul3</key> <real>1.11</real>
<key>m1</key>
<array>
<real>1.0507</real> <real>-0.4281</real> <real>-0.0161</real>
<real>-0.5540</real> <real>1.2938</real> <real>0.2909</real>
<real>-0.1205</real> <real>0.1844</real> <real>0.8335</real>
<real>-0.1566</real> <real>1.1051</real> <real>0.0577</real>
</array>
<key>m2</key>
<array>
<real>-0.4778</real> <real>0.9467</real> <real>0.2172</real>
<real>0.4743</real> <real>-0.1141</real> <real>0.4344</real>
<real>-0.5146</real> <real>0.9908</real> <real>0.6077</real>
<real>-0.1566</real> <real>1.1051</real> <real>0.0577</real>
</array>
<key>mc</key> <real>0.83355</real>
<key>otrc</key>
<array>
<real>0.00</real> <real>0.090</real> <real>1.467</real> <real>0.260</real> <real>1.842</real> <real>0.652</real> <real>1.040</real> <real>0.538</real>
</array>
</dict>

This is stellar.
Thanks. It wasn't as hard as I thought it would be... I didn't think it was possible at first.
is this in fact all
there is to supporting a new camera RAW format --
providing a translation array in a plist file?
What follows is pure speculation... I really don't have a solid understanding of this at all.
Seems like all you have to do is get these Camera->XYZ trans values (trans may stand for transform or translate). The image is essentially monochrome with color filters over it. Some cameras use RGB filters, looks like Apple has supported a lot of those. Some are CYGM, so far Apple hasn't supported any of those. Apple has supported the Sony DSC F828 which is RGBE where E stands for Emerald. Total guess, but each set of three values in the m2 array is associated with a color. (9 total for RGB and 12 for CYGM and RGBE). Guessing, each of these sets of three values probably is used to calculate a response curve for each color.
Basically, when dcraw.c provided twelve values, I began to poke around Raw.plist and discovered the Sony F828 camera also had 12 values in its m2 array. It also had 4 premul (pre-multiplier) values, one for each set of 3 m2 values. So I took a leap of faith that CYGM could be supported because after all, a color is just a color. Does the computer really care if the value represents emerald or magenta? This produced a promising image but color was way off. I had to then tweak each premul value to bring the color in. Those values don't seem to be linear. A minor adjustment can either dramatically change everything or have no noticeable effect.
Are all RAW formats essentially supported via simply a
declarative filter array, or did it just happen to
work for G1 RAW, and other formats are different?
My amateur guess is many cameras are similar and a few stand out as different. For example, I'm guessing the Foveon cameras are an example of a different sort of RAW file. Thats just a guess based on looking at dcraw.c.
if this is all there is to
supporting a new RAW format, I wonder
- why more of the RAW formats weren't supported in the first place.
To get you to buy a fancy new camera on the Apple Store? Lazyness? Not enough time? Lack of cooperation from the manufacturer? All of the above?
- why RAW formats haven't been progressively added
since the Aperture release.
Seems like they could have had support for dozens of additional cameras. This took me only a matter of hours to figure out. Someone with a deep understanding could have done this in minutes.
The real time sink is when you almost have the colors correct and you are endlessly tweaking trying to get them perfect... as you will see, the colors will be fine in certain exposures and way off in others. Look at daylight vs. tungsten photos. It may take many hours to get the values of the camera correct to customers exacting standards. We, the photographers, are very picky.
Why don't we just contact Canon, Nikon, etc. and get
their translation values?
There are values for 83 additional cameras that aren't supported by Apple in the dcraw.c file. That's a place to start.

Will there be raw support for the Canon G10 before CS4?

Not complaining, just asking. I'll upgrade to CS4 eventually, probably sooner if my G10 is not convered in CS3/ACR.
Richard Southworth

Some it is definately that Adobe wants to make you upgrade, they need the
money like all businesses need the money. Anyone that thinks otherwise is
deluding themselves. However, the other part of it too is that with each new
version of Photoshop they add many new features to ACR, not just camera
support but new features. To upgrade the old version of ACR the last one for
CS3 for example they would need to maintain two seperate code bases and that
is a lot of work, that is going to increase the possibility of bugs and
other problems. It is far easier for Adobe to do it once and that is it.
This is why Lightroom and ACR are by and large updated together and why they
share the same code base, they only have invent the wheel once.
Now I am sure there is little reason why Adobe couldn't just make 5.1 work
with CS3. But, that goes back to the whole money thing. I guess you could
say ACR is a privilage and not a right. You earn the privilage to use the
lastest ACR by keeping your updates current.
This time around however, I have to say that Adobe did something that I
approve of very much and that is they release ACR 4.6 for CS3 AFTER CS4
shipped adding support for newer cameras. I would like to see Adobe do this
all of the time. That is do one final ACR update for the previous version of
Photoshop after the new version has shipped. I see this as a sort of thank
you.
Robert

What's going on with my pages for iOS7?

I have about 450Mb of pages files stored on my 16Gb iPad2. Since updating to iOS7 and updating the pages app, it crashes often; does not show the file preview (just orange pages icons where the visual representation of the file should be); and often runs slow when closing and opening files. I've tried restarting iPad. I often close pages all the way down to get it to unfreeze. Is this a known issue? Is there a fix? I use this daily in a business setting and this just will not work. Thanks!

Is this a one-time occurence, or is it continuous?
Does the drive have a separate power source or is it bus powered by the Mini?

TS4496 Is apple working to solve the tethering issue for the Canon 6D?

Aperture is not detecting my Canon 6D for tethering. Is there a solution in sight?

We don't know. Send feedback to Apple:
http://www.apple.com/feedback/aperture.html
As a workaround you can use the supplied Canon Software.

Will there be raw support for the Canon G10 before hell freezes over?

I know, patience. Just gripes my soul the P6000 made it and the G10 didn't. Sigh.
Richard Southworth

<[email protected]> wrote in message news:[email protected].. > Yes Eric, I understand there's no useful purpose to my post, just > catharsis. > > Richard Southworth Then there is a useful purpose to your post. Stress releif saves lives! Robert

No ext4 support for the micro SD

I have a 64GB micro SD card that I formatted to ext4 and works without any problem in my LG GPad 8.3 Android 4 tablet and Linux computer.
I tried it in my Z1C, but it tells me the SD is damaged.
When is Sony going to add ext4 support for the micro SD port?
It can't be that hard, as Android is based on Linux and Linux has support for ext4 for several years now.

As far as I know,only exFAT is supported for now.Contact xperia care for more info:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HT1338 What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR cha

I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR changing the WB it is giving me a second copy with a new WB. Your advise is very much needed and appreciated. Thank you.

Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
Are these second copy photos by any chance photos that had been previously imported?

What is going on with tethered support for the canon 70D?

Similar Messages

Maybe you are looking for