What is going with this new software update, ios 6.1?

When I update to the new software for my iphone 5 and ipad, everything went well but I lost all my contacts on my home (important numbers). Then I went to the App Store when I get a free app and sign in with the new password, it said "could not sign in." I reset my new password then try same process again. Then the same message pop-ups again. Even rebooting the system again. THIS NEW UPDATE IS GIVING US A LOT OF PROBLEMS!!!! Now I could not get any free apps for school.

Sign out of the store first, then sign in again.

Similar Messages

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

  • Install RAC 11gR2 and Apply Patches with OUI New Software Updates Option

    Has anyone tried the installation with the New Software Updates Option?
    I will install 11gR2 RAC Grid and I plan to do the following steps:
    1) Install Oracle Grid Infrastructure Patchset 11.2.0.2
    2) Do all the configuration with OUI
    3) Create ASM disks
    4) Install Oracle Database 11.2.0.2 Software Only
    5) Apply Oracle Recommended Patches 11.2.0.2.2 (12311357) and 12431716. (ref. MOS doc [ID 756671.1])
    6) Create RAC Database (advanced option) with DBCA
    With these steps:
    Grid and ASM disks would be configured without the recommended patches, but the database will be created with the patches applied.
    I would not like to do a "Software only" install of GI and then apply the patches because later I would have to manually do all the configuration steps.
    If I use the OUI Software Updates Option to apply the patches, will OUI do all the patching and then let me configure GRID with OUI ?
    Quote from Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux - Part Number E17212-11:
    " Use the Software Updates feature to dynamically download and apply software updates as part of the Oracle Database installation. You can also download the updates separately using the downloadUpdates option and later apply them during the installation by providing the location where the updates are present."
    I could not find more detailed information about this feature on documentation and MOS .
    Thanks

    Hi,
    You can download Latest Updates And Patches Using using option -downloadUpdates
    ./runInstaller -downloadUpdatesYou can use this note:
    *How To Download The Latest Updates And Patches Using 11.2.0.2 OUI [ID 1295074.1]*
    Don't miss it ..
    *Error: INS-20704 While Installing 11.2.0.2 with "Use pre-downloaded software updates" Option [ID 1265270.1]*
    Note : Please make sure that user downloading the patches updates have the proper/correct permission to download the patch updates from MOS ( My Oracle Support).
    Do not use the /tmp/oraInstall* directories for the download location. Unpublished bug 9975999
    Documentation explaining ...
    4.5.1 Running Oracle Universal Installer
    Downloading Updates Before Installation
    http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH
    Regards,
    Levi Pereira

  • How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.

  • Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
    - Greg

  • HT1848 How do I transfer purchases from my Ipod to the computer with this new Itunes update?

    How do i transfer purchases from my IPod to my comouter with this new ITunes update?

    The same way you have done in every version of iTunes.
    Right click on the device and select "Transfer Purchases"
    If the sidebar is not displaying, type Cntrl + S.

  • HT4623 how do you close off apps with the new software update?

    How do you close out apps with the new software update on iphone? I cannot x out of them.

    Double tap the home buttons and swipe upwards on the preview of the App (not the App Icon).

  • Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • What is this new software update msg I get when I go to firefox?

    Every time i fist go to firefox I get a pop up window saying Software update-- with msg: "it is strongly recommended that you apply this update as soon as possible>"
    When I try to click on the other msg there: "View more infomration on this update." nothing happens. I am suspicious...
    what is going on?

    You are not running the latest version of Firefox so it may be a genuine prompt. Try downloading and installing the latest version of Firefox from http://www.mozilla.com/ then see if you still get the prompt.
    Alternatively, in the help menu select "About Firefox. It should then check for updates.

  • Why can I not make calls on my iphone with the new software update (sprint)

    I'm not able to make calls for hours at a time or recieve text messages on my iPhone 4S. This has all started happening after I updated to the new software. HELP?!

    Hello Ciddy14,
    Thank you for using Apple Support Communities!
    First, if you have not already, I would restart the iPhone then try again.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    From: iOS: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If the issue persists, I would next try the troubleshooting in this article:
    OS: Troubleshooting Siri
    http://support.apple.com/kb/TS4079
    And if the issue still persists, I would then backup and restore your phone to iTunes.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Take care,
    Sterling

  • What's up with this new iMac

    Aloha all, I just purchased a new iMac with the following - 27" 3.1 GHz Intel Core i5,with 8 GB ram, running OS 10.6.7. After using an G5 PPC for 7 years, I thought it a good time to upgrade.
    My inquiry is page-ins, page-outs, & swap. I keep getting a large amounts of page-outs, & swap being used, especially when using Photoshop, & Photoshop Elements, but not limited to those programs. After what I think would just be normal usage, the same thing happens. Using my old G5 PPC for the same tasks I can't remember so many. I end up using Activity Monitor to check this now, pretty much daily, and they are always showing up. If anyone has any ideas or thoughts about why this is happening I'd really like to hear them. More importantly I'd like to know if there is a way to reduce them, or if should just ignore them.
    Also this new machine doesn't seem much faster than my 7 year old PPC. Should I be concerned?  In the years I have been posting here I have always gotten good advice, so I'm looking forward to seeing the answers to my queries. Thanks for any time, tips, suggestions.        JB

    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • Does the 7th generation nano consist of new hardware or is it the 6th generation with a new software update?

    Does the 7th generation nano consist of new hardware or is it the 6th generation with new software?

    It is a 6th gen that currently comes with 1.1 that you update to 1.2.  Also sells for a lower cost and doesn't require you to pay more for the nike+ kit.
    https://discussions.apple.com/message/16297530#16297530

  • HT4623 With the new software update on the iphone, how do I delete a photo and also how do I close open apps so I dont wear battery down

    With the new update for iphone, how do I delete a photo and how do I close open apps.  There used to be a delete button to delete a photo and I used to double click on the main phone button and then click on the x to close an app.

    Wipe the drive using DiskUtility and download and reinstall Yosemite and set it up as a new Mac. Then purchase the Apps you require with your own Apple ID which you will enter when setting up the new Mac.
    Cheers
    Pete

  • New software update  iOS 8.1.3

    Today I uploaded the new iOS 8 1 3 after an hour the iPhone 6 reset itself, flickers and ask for apple id every 15 min, Has anyone else had troble with the new update?

    I would recommend Allan's advice ^. If unsuccessful, I'd log into iCloud on the device, then go to App Store, View Apple ID, and verify that your Apple ID does not need to be verified on the device. The flicker I can't quite explain, but if it seems that the update may have caused any issues I would instruct you to perform a solid back-up via iTunes and iCloud and perform a factory data reset by doing the following:
    Tap Settings>General>Reset>Erase All Contents & Settiings
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • I have latest version of Java and the addin plug in is not there. I have a mac. I am not running on 32 bit. I have had so many problems with this new java updat

    I updated java to 7 up 45 (in error, this version of java does not work with vpn and according to apple, I can't go back to earlier version). The applet plugin does not show in my add ons. I am not running 32 bit. I have read and tried every article I can find. I have uninstalled and reinstalled still no luck. I have an iMac, just updated to maverick.

    See if anything here is helpful:
    *http://kb.mozillazine.org/Java#If_the_Java_plugin_does_not_appear_in_the_Add-ons_Manager_even_though_Java_is_installed

Maybe you are looking for

  • How do I use a new computer with same old iPod?

    Before I knew about the problem of switching computers I purchased some new songs from iTunes on my new computer, but using my old login. It allowed me to purchase and upload the songs to my new computer, but it won't let me put them onto the iPod.(?

  • Meeting Indian Stautory requirements and US GAAP requirements in FA

    Has any one met the Indian Statutory requirements pertaining to: i)Additions of Exchange Fluctuation Cost ii)Capital Grants for recording in Indian FA Book but not copying into US GAAP FA Book Can you flag certain Cost additons from getting into FA T

  • MBPr does not recognize Samson USB microphone.

    I've been using a Samson GoMic USB for several months. Just today the MBPr has stopped responding to it. I can see the mic under <Sound>, I can select it as the input device, but it does not register any sound input. Works fine on two other macs. Bui

  • BAPI_BUPA_ADDRESS_ADD

    Hello together, Help me.  The function module BAPI_BUPA_ADDRESS_ADD - (create address data)is saved the data not in the databank tables. Why? CALL FUNCTION 'BAPI_BUPA_ADDRESS_ADD'     EXPORTING       businesspartner       = lv_bpartner       addressd

  • Please convert this VI to 8.2

    Hello, I need an example of how to save several numeric values and graphs to an csv file (or something that can be read by excel). I have found this VI but I need it in 8.2 version. Could someone convert it? If anyone has more example of saving diffe