What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there.
What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there and the slides have their orignal number--there are just white spaces where the slide should be and I can only get to the slide by clicking through from the prior slide. How do I get the sldies back into the navigator so I can see them. Oddly, they are show up just find on the light table.
Try removing any transitions or builds on these slides, or delete the slides then recreate them as fresh slides.
There are many playback anomalies in Keynote 6 which Apple have said they will be sorting out next year.
Similar Messages
-
I restarted the computer and i started browsing then i opened my tab like i usually and found that it was blank and the "most visited" sites were gone
hello, is there an icon on the top-right of the page that allows you to switch the thumbnails on or off?
otherwise you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ searchreset addon] to get rid of the problem or manually reset the page that opens on each new tab: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up), search for the preference named '''browser.newtab.url''' and double-click & change its value to '''about:newtab'''.
[[New Tab Page – show, hide and customize top sites]] -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
Until the most recent update when the url that I wanted in the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?
cor-el, thank you so much. That fixed it, but does this mean I can't use AVG Safe Search.Is there a substitute? I do like the security (hopefully real) that it offers. What now? How do I get out of Safe Mode?
Sherry -
I am having trouble.I can't even set my Touch back up. I can type on the key board. I try to touch one key and a bunch go. I don't even have to touch the screen.
First make sure the screen is clean,
The try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem
Apple Retail Store - Genius Bar -
We have 4 Iphones. As a family we have happily shared the same ITunes account and one AppleID. After the most recent iPhone IOS update all our contacts and calendars have merged and we randomly receive some messages that one of us has sent to another contact.
This is causing chaos.
Can anyone help me with:
1. Has anyone experienced a similar problem recently?
2. The records to the individual phones have not been saved been saved separately. After this merging of all the data into one composite record, is there anyway to reverse the change and restore the phones to just their individual records?
3. I guess that the cause may be the common AppleID. I have tried to create my own AppleID but my personal email address is already linked to the existing AppleID so I am blocked from setting up a separate AppleID in my own name. Does anyone know how I can get around this block?
4. Would it be better to create a separate Apple ICloud address for each of us as well? How do I do this?
Many thanks in anticipation,
PeterThis is exactly what happens when sharing a single Apple ID for iCloud and iMessage. Why would you expect any different?
-
Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!
I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.
-
I just installed the most recent update. Now Firefox tries to start and then locks up.
I just installed the most recent update. Firefox starts to load and then locks up. Cannot get homepage to load or go to any other websites.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up -
i have the iphone 3gs and the update ios6 but for some reason i can not send or recieve pictures from ppl that don't have the iphone or dont have the newest update what can i do to fix it!
Try to do basic troubleshooting, but 9/10 that is actually a service provider issue.
-
I have already reset the phone but still can't receive or send messages
Your MacBook shoul NOT be too old to run Leopard. (10.5) Snow Leopard, maybe, but not Leopard.
When you go to the Genius Bar, MAKE SURE the genius knows you are NOT up to date with your OS. If they try to update your phone, you could find yourself unable to sync at all...
That said, if you're nice to them, they might just give you a copy of Leopard so you can get current with iTunes and iOS. It's been known to happen. -
I have been unable to use the copy and past command while using mozilla. the fucntion does work in windows IE, but I don't want to use windows. How do I restore or fix this function? I varies, works some days and not others.
See http://kb.mozillazine.org/Clipboard_not_working
Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete -
I am not very tech savy and apologize in advance if my question is not clear. I use the Mail application on my mac and I have two users on my computer, one for gmail and another for my work email. All email addresses appear in the mail application on one page. When I open my email and click on a message it often goes to the other user screen and cuts off the top of my screen which shows the bar for Chrome, file, edit, view, history etc....Still functional but very annoying. How do I choose a user screen and stop having it switch back and forth.
Thank you.Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline -
When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
== This happened ==
Every time Firefox opened
== I installed the new FirefoxPlease can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.
-
I proyect is 30 minutes long, im using only AVI files, no mpegs or anything, when I tried to used the encoder because it gave me the message "Failed to return a video frame", but i checked, started the proyect over...and there is no empty frame or anything....Please help!!!!!
The Failed to Return Video Frame error is often associated with a gap between Clips in the Timeline.
Zoom your Timeline view to max horizontal, hit Home and then PageDn repeatedly. Watch the CTI and also watch for any visible gap. The CTI should jump directly to the next Clip (be careful, as it will also include any Clip on any other Video Track, or Audio Track). If it seems to "hiccup," or "jutter," you have likely found your gap.Though it can only be as small as 1 frame, even with the Timeline zoomed in to max, they can be difficult to see.
Close the gap, and do not create another along the Timeline by doing so. Test your Export without the gaps, and see if it completes.
Good luck, and be sure to watch closely and carefully, as gaps can be tough to spot.
Hunt -
Clicking the Stamp tool doesn't select the most recently used stamp - Acrobat X
My issue is pretty much what the title says. Clicking the Stamp tool doesn't select the most recently used stamp. According to the Help screens and training videos, it should. I've checked Edit > Prefernces and could not find a setting that adjusted this behavior of the Stamp tool. Does anyone know what can be done to fix this? BTW - It's not just my installation of Acrobat X. Other users at my firm are having the same issue. The OS is Windows 7. Users have administrator rights. Thanks in advance.
Hello Abhilasha,
So, what your saying is that this function, the ability to select the most recently used stamp by clicking the stamp tool, has been removed, in spite of the fact that Acrobat's Help pages says it can be done (Using Acrobat X Standard > Collaboration > Commenting > Apply a Stamp > Step 1 > Second bullet). I wish they would put it back. It was quite handy.
Perhaps I should adjust my request. Do you (or anyone else) know of a way to use the same stamp several times in a row without having to choose the stamp from the stamps list? For example, if you needed to put a check-mark stamp in several places in a document, it would be a pain to have to go back to the list each time. Is there perhaps an undocumented feature (maybe holding down a particular key while using the stamp) that would allow for multiple stamping?
Thank you,
Phillip
Maybe you are looking for
-
Firefox crashed without even opening the main window - just the apology pop-up appeared. Nothing I could do would open the programme. MS Fixit identified a problem with IE8 and put it down to AVG8 Link Scanner. I disabled this, and tried Firefox agai
-
Hello Experts, Although I am not a PI expert i would like to ask , Can I have Dynamic Queue name generation on the basis of the payload which i am receiving Quality of service my be any EO or EOIO . For example My pay load stream my contain Data fo
-
No results with Search in 9.0.2
None of our searches (advanced search, basic search and custom search) are working. It doesn't work to find a name of a page and no keywords either. What could be the problem?
-
Hi, As per the new excise rate changes ie, 14 to 10%, i have changed the % in FV12 with valid date. Issue is when i post GR my old po's, system is taking 10% instead of 14%.. whn i change the posting date before 7/12, it's giving 14%.. If i want to c
-
Hi I wrote a programme for removing and adding roles on mass in ECC6, our security team would now like to have this programme avialble in SAP CRM, where I have come across a bit of a snag. The FM and everything are there ok, but I get an error on the