What is hashmap user for?

What is a hashmap and what is it user for versus using an array or vector?
Thanks.

What is a hashmap and what is it user for versus
using an array or vector?A HashMap is a combination of a mathematical abstraction called a map and an implementation data structure called a hash table.
A map consists of keys and for each key a corresponding item. You access the map by presenting the key. In return you get the associated item. Keys must be unique.
A hash table basically is an array. It uses a so called hash function to transform the key value to a corresponding array index (where the item is stored). This is the fastest way possible to access an array on value. The drawback is that keys aren't kept sorted. If you want that you can instead use a TreeMap which uses a tree as implementation data structure instead of a hash table. The keys will be kept sorted but you pay with a slightly slower access.
So a HashMap is used when you want to store key/item pairs, very fast access based on key value, and don't care for sorted keys.

Similar Messages

What 's the user for SLD

Hi all :
     I'd like to log onto SLD with J2EE_admin and XIsuper, after log on , all buttons like 'Administration' are all grey (don't work). some message at the top says that missing role for these two users. I tried add all roles to the two users with SU01 , but that doesn't work.
     Would you please tell me how to correct this , how to add roles to these two users. or are there any more users to log on and administrator on SLD?
     couldn't thank you more !!!

Plz refer the following link,
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Following are SLD Specific roles.
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
As per your requirement add the corresponding role to your ID.
For the UME access privileges are controlled by UME actions. So go to the role maintenance screen, In Assigned Actions tab search for actions "LcrUser" and assign it to role.
See the below thread.
/thread/341804 [original link is broken]
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm

What is Field User for Annual Salary

Hi All,
I want to fetch data of Annual Salary of an employee. I can see them in PA20 but when I go to the table PA0008 to find the value of this ( Field - ANSAL ) its not stored all the time.
Where can i find the value of Annual Salary if its not present in PA0008 but its appearing in PA20 display.
Regards,
Vidya.....

hi vidya,
if indirect valuation is being used, the annual salary field ANSAL also may not be populated. Again, there are some SAP function modules to help us out:
RP_ANSAL_FROM_PERNR - Use this one if all you have is PERNR
RP_ANSAL_FROM_INFOTYPE - Good if you have already data for infotypes 0001 & 0008
RP_ANSAL_FROM_WAGETYPES - It requires a list of wage types used in 8
Regards
Anup.

I'm looking for an app that will allow a presenter to give ipads to several other users in a room and control what's on display for the group

please let me know if you know of any good apps to sync up several ipads in a room with one person in control. I'm looking for an app that will allow a presenter to control what's on display for several other ipad users in a room. I'd like to be able to do presentations over the ipad, but i want the presenter to control the screens so folks in the meetings don't get distracted by playing with the ipad. i'd like to avoid using a web meeting service and do this without having to connect to any kind of network since i'll often be doing this outside of my office.

Try http://mysyncpad.com/. I'm not sure if it will do all you need, but it's the closest I've seen.

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What are the best practices to migrate VPN users for Inter forest mgration?

What are the best practices to migrate VPN users for Inter forest mgration?

It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
Quest (QMM) has a VPN migration solution/tool.
ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

WHAT IS THE MECHANISM FOR AUDITING PORTAL USER ACTIVITY

Is there any default mechanism for auditing a portal users access to
tables. At the DB level, we are seeing the portal_public user but we want to see the portal user instead; e.g. we need to report on activity such as: portal user johndoe deleted a row of data from a table.
johndoe is only a portal user not a database user.
We are trying to keep from writing additional custom code to auditing. We are
using wwctx_api.get_user_id in other parts of the application and we would like
to avoid writing a custom auditing module.

William,
I'm not sure if this is what you are looking for, but...
When you create (or edit) a component in Portal 10g, there is a Log Activity check box. If you check this box, then go to Manage the component (in the Portal Navigator), there are Develop, Manage and Access tabs. The Manage tab has a Monitor icon, which has the information you may be looking for. This does not seem to be available directly for database tables. However, I created a Calendar, based on a database table I created to keep track of the Calendar Events. I also created a form to allow users to add Calendar Event entries. I turned logging on for both components. The Monitoring allows me to see when each user has accessed the Calendar, and who and when they insert, update or delete entries from the Calendar table.
-Ricky Burke

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. what i can do for that ?

This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled i have never use any other id so i am confused.... what i can do for that ? any idea...

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 5
According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

Hi. Dear users. What about Web Browsers for Mac and IPhone 4S devices

Hi. Dear users. What about Web Browsers for Mac and IPhone 4S devices?
Test Labs: THG and something else.
Thanks for responses and future responses.
Big Thanks.

"What about?" Both come with Safari as a Web Browser.
Can you be a little more specific as to the information you are requesting?

Re: (forte-users) Ok, what's the "secret" for setting serverside envi

Dear Robinson,
It seems to be that you have 2 ways of solving the problem:
1) restart forte after setting the environment variables
2) write a little application which sets the required variables, using
the task.part.OperatingSystem.SetEnv(name,value) method.
If you have to chage the variables rarely, then it`s easier to restart forte,
otherwise I would suggest to use the SetEnv function...
Best Regards,
Tamas Deak
"Robinson, Richard" wrote:
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-

Richard,
There is no way of changing the environment variable once the Node
Manager is up. You will have to shutdown the node manager and then restart
it to have the new environment variables take effect. Sorry, there is no
secret way of doing this that I know of.
But you can set the variables on you development machine and run you
application without distributing. This way the partition will be running in
your client machine and not the server.
Another way we have also got around this is by having a special
environment variable on the client side that opens a admin screen when you
run you application. This admin screen will allow you to change the
environment variables and then set them on the server partition. You will
have to do come coding on the server to make this happen but if you are
using a framework then it should be easy. We call this developer reconnect
facility. It only can be activated by the special client side environment
variable. I comes in very handy when we are development and want to change
the database on the server partition.
Hope this help.
ka
Kamran Amin
Framework, Inc.
303 South Broadway
Tarrytown, NY 10591
(914) 631-2322x121
[email protected]
http://www.frameworkinc.com/
-----Original Message-----
From: Robinson, Richard [mailto:[email protected]]
Sent: Thursday, November 04, 1999 7:23 AM
To: [email protected]
Subject: (forte-users) Ok, what's the "secret" for setting server side
environment varia bles when running in the Forte Development
Environment?
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

How can we identify what are all user exits are there for sales orders,deli

Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel v

Hi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you

What is this password and user for?

I'm switching from Windows to Mac I just set up my airport extreame and I was wondering what is the purpose for the username, password, and hostname under the global Bonjour settings? I am sharing a printer.
Thanks

That means "The user name or password for Hotmail is incorrect"...
Or, there is a problem and the server hiccuped during password transmission and rejected the authentication attempt.

What is hashmap user for?

Similar Messages

Maybe you are looking for