What is  help to create prototype of SEM BCS?

Hi guys,
Can give me an idea about the role:"help to create  prototype of SEM BCS"?
thanks

hi,
you create window
for secondary window :
right click on window ->create template--> go template tab
under template create TEXT node in that label is hard code
For main window:
right click on window ->create table line-->table tab
under template create TEXT node in that label is hard code
regards,
bhupal.
Edited by: bhupal reddy on Aug 6, 2008 8:19 AM

Similar Messages

  • Difference between SAP BPC & SEM BCS

    Hi Gurus,
    What is the difference between SAP BPC & SEM BCS And throw some light on both?
    Thanks in Advance,
    Sandy.

    Hi Sandy,
    The functionality in BPC mainly 1) Planning   2) Consolidation
    1) Planning : You can have any type planning scenario.  Ex.: Sales planning.  Based on the actual previous data
    we will have some projection reports on the sales for future sales, so we can have planning scenario here . We can change
    the projections as per our requirement for any number of times.
    Ex 2: HR Planning.  Based on the market condition we have recruitment planning, based on the actual data (Existing Emp.)
    Ex 3: Accounts Expenditure planning like this we can have planning forecastings.
    2) Consolidations : We can consolidate the group company, companies with currency translations, allocations, Inter Unit
    eliminations, consolidated P&L accounts & Consolidated Balance Sheets are possible in this.
    But where as in BCS you can do only 2 part.  The first part is not possible.  Hence I personally suggest you to learn BPC NW
    it will be more useful.  BPC is now going to integrated with BO (Buss. Objects) also from 7.5 ver onwards.
    I hope this may help you.
    Regards,
    B.S.RAGHU

  • Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

    Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!

    settings >>>>notifications>>>>Mail >>>>allow notifications >>>off  (your choice )
    settings>>>sounds>>>new mail>>>>none  ( will kill rings )

  • Need help to create report with jpeg/gif image

    Hello,
    I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
    Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
    Thanks,
    John

    Hi,
    I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
    Thanks,
    John

  • Need help in Creating DB manually with OFA

    Hi,
    I want to create database in 10g manually and for this purpose
    I need help.
    since we can use OFA for storing Control files, and redolog file
    and datafile by describing them in Create database command but
    how to store any instance related file like spfile, pfile or network
    related file.
    once the oracle 10g database software is installed then if we want
    to create database then how can we separate the database file and
    all other instance files from software binaries because I've noted
    that creating database with DBCA create all instance files along with
    binary files of the software although DBCA give you option of creating
    database related file in some other location/directory.
    kindly help me in this I want to achieve above task in compliance with
    OFA
    Thanks and Regards,
    D.Abbasi

    Abbasi wrote:
    Hi,
    I want to create database in 10g manually and for this purpose
    I need help.
    since we can use OFA for storing Control files, and redolog file
    and datafile by describing them in Create database command but
    how to store any instance related file like spfile, pfile or network
    related file.
    once the oracle 10g database software is installed then if we want
    to create database then how can we separate the database file and
    all other instance files from software binaries because I've noted
    that creating database with DBCA create all instance files along with
    binary files of the software although DBCA give you option of creating
    database related file in some other location/directory.
    kindly help me in this I want to achieve above task in compliance with
    OFA
    Thanks and Regards,
    D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
    As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
    BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
    Edited by: EdStevens on Aug 16, 2009 8:46 PM

  • Need help in creating RAID 5

    Hi everyone,
    i'm fairly new to RAID scene and i need help for creating RAID 5 with 8 disk's. 
    I have HP ProLiant DL380 G6 with 8 disk's, each 500 GB.
    i'm trying to create RAID 5 and to have one spare disk. I have made array from 7 disk and then create logical drive.
    the last disk (8-th) i used as spare. 
    up to now i think i'm ok???
    what confuse me is:
    7 HDD X 500GB= 3500GB
    after creating array i get 3200 GB, where i lose 300 GB??
    after creating logical drive i get 2700 GB, where i lose 500 GB???
    from 2700GB i give 150GB for system partition and for data storage i have only 2550 GB.
    Why i lose 800GB??
    Can someone explain me how RAID 5 works, do i create it correctly and why i lose so much space???
    Is there other way to create RAID 5 without losing so much space? 
    Thanks you in advnce. 

    The first 'loss' you encounter (300MB) is due to megabyte counting/rounding.  A 500GB disk contains about 500.000.000 bytes. This quite a bit less than if counted properly using binary. you loose about 24288000 bytes per disk this way!
    http://en.wikipedia.org/wiki/Mibibyte |
    http://en.wikipedia.org/wiki/Megabyte
    the second loss is due to how raid works.in raid 5 data is written to multiple disks to improve reliability. the simplies t form uses 3 disks: a write will cause half of the data to be written to disk 1, half to disk 2 and the XOR of both datahalfs to disk
    3. In this scenario you will loose 33% of storage space and you can loose up to one of 3 disks.
    By adding more disks, data can be spread more and the ratio available/raw will increase, or you can write aditionnal crc data and increase resliency for failures.
    http://en.wikipedia.org/wiki/RAID
    To check the exact algoritmes using on you RAID adapter, I would recommend contacting the vendor (or checking their support site) From your numbres, I do not think you will be able to configure RAID 5 on the same disks and having more available
    space for your data.
    MCP/MCSA/MCTS/MCITP

  • Need Help in creating Unix Shell Script for database

    Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
    Here is the condition which i want to implement.
    1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
    2. Increase size of redolog file.
    3. Load sample schema.
    4. dump the schema.
    5. Create empty db (Script should check if db already exists and drop it in this case).
    6. Create backup using rman.
    7. restore backup which you have backed up.

    This isn't much of a "code-sharing" site but a "knowledge-sharing" site.  Code posted me may be from a questioner who has a problem / issue / error with his code.   But we don't generally see people writing entire scripts as responses to such questions as yours.  There may be other sites where you can get coding done "for free".
    What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
    But the expectation here is for you to write your own code.
    Hemant K Chitale

  • Need help in creating multiple signature forms?

    need help in creating multiple signature forms that can be digitally signed in adobe reader

    Automator gets a bit unweildy when trying to vary things outside of what the actions provide.  Since you are already using an AppeScript in your workflow, might as well do the whole thing:
    set baseFolder to (path to desktop) -- the location to create the folder
    display dialog "Please provide a new folder name:" default answer "test"
    set folderName to text returned of the result
    repeat -- keep repeating until a number is returned
      display dialog "How many subfolders?" default answer "5"
      set theNumber to text returned of the result
        try -- test the result
          set theNumber to theNumber as integer
          exit repeat -- success
        end try
    end repeat
    tell application "Finder"
      try -- make new folder
        set newFolder to (make new folder at baseFolder with properties {name:folderName})
      on error number -48 -- skip errors if the folder is already there
        set newFolder to ((baseFolder as text) & folderName) as alias
      end try
      repeat with X from 1 to theNumber
        try -- make new subfolder
          make new folder at newFolder with properties {name:folderName & X}
        on error number -48 -- skip errors if the folder is already there
        end try
      end repeat
    end tell

  • What is procedure to create a CIN ?

    HI ALL ,
    what is procedure to create a CIN ? Configure in SPRO.tell me the path ,
    IS CIN used Excise material ?  WITHOUT IT POSSIBLE OR NOT ,
    HELP ME OUT.
    THANKS
    SAMAL

    Hi,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc
    Regards,
    Pardeep Malik

  • Help to create a pkgbuild for harpia

    hi i want to create a pkgbuild for the harpia program http://s2i.das.ufsc.br/harpia/en/home.html
    searching in the aur and in the net i couldn't find something
    harpia exist for ubuntu and the .deb file is hosted here http://packages.ubuntu.com/oneiric/all/harpia
    can someone help me create a working pkgbuild for arch through the .deb file
    i tried to create a first approach by creating the following PKGBUILD:
    pkgname=harpia
    pkgver=1.1
    pkgrel=1
    pkgdesc="Image Processing/Computer Vision Automatic Prgm. Tool"
    arch=('any')
    url="http://s2i.das.ufsc.br/harpia/en/home.html"
    license=('GPL2')
    depends=('')
    source=("http://archive.ubuntu.com/ubuntu/pool/universe/h/harpia/${pkgname}_${pkgver}-0ubuntu1.1_all.deb")
    md5sums=('56c6cb146ea5652e41b77506ad8ec263')
    build() {
    bsdtar -C "$pkgdir" -xvf data.tar.gz
    however when i am running the program i am taking the following error:
    Traceback (most recent call last):
    File "/usr/bin/harpia", line 32, in <module>
    from harpia import harpiagcfrontend
    ImportError: No module named harpia
    i guess that the problem might have to do with some dependencies or with the python library, can you provide me with some tips
    thanks

    Well, I'm not going to tell you every little thing .
    I found a likely candidate for python-gnome2 in pacman using a judicious choice of search terms. As for the rest, I suggest you go to the Debian or Ubuntu package lists. The Debian ones are easy to find in Google. These lists contain lots of information about what packages contain and what they provide and where the source code is from.
    Do some detective work, you will figure it out.

  • Need help with creating a brush

    Hi guys,
    I wanted to ask for help with creating a brush (even a link to a tutorial will be goon enough ).
    I got this sample:
    I've created a brush from it, and i'm trying to get this kind of result:
    but it's only duplicates it and gives me this result:
    Can someone help me please understand what i need to define in order to make the brush behave like a continues brush instead of duplicate it?
    Thank you very much
    shlomit

    what you need to do is make a brush that looks like the tip of a brush. photoshop has several already but you can make your own that will be better.
    get a paintbrush and paint a spot kind of like what you did but dont paint a stroke. make it look kindof grungy. then make your brush from that, making sure to desaturate it and everything.
    EDIT:
    oh, and if you bring the fill down to like 10-20% your stroke will look better

  • I need help with creating PDF with Preview...

    Hello
    I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.

    I can't find it.  I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
    EDIT: I realized that you cant do batch sequences in standard.  Any other ideas?

  • I need a help in creating a socket server ...

    Hi
    i need a help with creating a server that listen to a port(specified one). when the connection occured from the client, it should respond with a random number generator only.
    it's a socket program.
    thank u very much

    kiiwii14 wrote:
    i mean i didn't take java yet in the college. and, i'm gonna take it next course.
    and,the Dr. gave us an assignment to do it in java. and, i ask him to do it in other language(c++) but he insist to do it in java. so, i'm asking for help...
    i hope it's clear know...If you know some c++, the learning curve doesn't have to be very steep. If you haven't got an IDE yet, that's the first thing to do - Eclipse is free and quite good. Ask it to create a new class, e.g. NumberServer and have the option to create a main method checked. Finish the server part first - you should be able to communicate with it through telnet. Put in a lot of System.out.println so you see what your program is doing, or better yet, learn to use the IDE's debugger - which is good in Eclipse. Read the javadocs for the classes mentioned in an earlier response, and search this forum or Google for their usage if you find the documentation lacking. Then when you have specific problems that you need help with, you can create new questions for them here.

  • Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server

    Hi All,
    I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform.
    One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 32-bit or a 64-bit kernel will be run (unless you override it)
    I hence downloaded the iso from http://www.sun.com/software/solaris/get.jsp and I installed it. When I run uname -a command on the terminal, this is what is displayed -
    SunOS unknown 5.10 Generic_127128-11 i86pc i386 i86pc
    This indicates that the kernel is 32 bit right?
    Please help me create the 64 bit VM.
    Thanks in Advance,
    Raj.

    Hi,
    I am having lots of trouble doing a jumpstart
    installation of Solaris 10
    on a T1000 Server.
    My setup
    Using Debian Sarge as the Jumpstart Server ( I have
    used this machine to install Sol 8 and 9 on Sun
    V240/210. Running TFTP Server, RARPD,
    BOOTPARAMD,NFS.
    T1000 - No OS installed.
    Attempted an Install by doing - boot net -v install
    Below is the screen output.
    Rebooting with command: boot net -v install
    Boot device: /pci@7c0/pci@0/network@4 File and args:
    -v install
    100 Mbps FDX Link up
    Requesting Internet Address for 0:14:4f:21:b9:c4
    Requesting Internet Address for 0:14:4f:21:b9:c4
    100 Mbps FDX Link up
    Using RARP/BOOTPARAMS...
    Internet address is: 192.168.2.35
    hostname: sun-server
    domainname: milky
    Found 192.168.2.1 @ 0:20:e0:65:48:3d
    root server: 192.168.2.1 (192.168.2.1)
    root directory:
    /jumpstart/2.10/Solaris_10/Tools/Boot
    Found 192.168.5 @ 0:d:56:10:13:28Don't see any problem here.
    boot: cannot open kernel/sparcv9/unix
    Enter filename [kernel/sparcv9/unix]:
    Do it a favour. Go Sarge box and goto /jumpstart/2.10/Solaris_10/Tools/Boot
    and check do you have required kernel (kernel/sparcv9/unix)
    also check your privilege for the file please.
    I think it is possibly not mounting the nfs share. I
    have already changed the NFS_client variable to 3
    under etc/default/nfs in the Boot directory.
    I would appreciate any help or suggestions.

  • HANA auditing, what file types get created?

    Hello,
    I've read through the blog 'SAP HANA audit trail, best practice' by  Frank Buchholz to create audit policies in HANA. Great blog and really appreciate sharing his experience. I've also worked with my hosting team to make audit configuration changes.
    They've now asked me to check to see that the policies I've setup are creating records, and they've given me the path to check. The problem I have is I don't know what to look for. What file types are created in the OS SYSLOG by the audit policies? Would the files have the same name as the policies themselves? (self auditing, user SYSTEM, technical users, etc..) Does anyone have a sample with a screenshot to share?
    Thanks for the help.
    Cheers, Paul

    This web site may be a good place to start:
    http://www.fileinfo.com/filetypes/common
    There are other places that you may search on the Internet that may help close the gap.
    Ciao.

Maybe you are looking for