What is hierarchical data transfer in functional location

hai,
i want to know indetail about hierarchical data transfer and horizontal data transfer in functional location.
can any one help me in this regard....
plz give information with some example if you dont mind...
thanks in advance
regards
gunnu.

Hi
From SAP HELP
Hierarchical Data Transfer
Definition
You can maintain data at a high level within a hierarchical object structure. The system will automatically transfer the data changes to the levels below that are affected.
The maintenance planner group is changed for the clarification plant described in Functional Location. The employee responsible for maintaining the master data makes the change to the master record of the highest functional location C1 and saves the changes. The system automatically makes the same change for all affected functional locations below the functional location C1, and issues a message to inform the employee of these changes.
Horizontal Data Transfer
Definition
With horizontal data transfer you can differentiate between:
Data transfer from reference location to functional location
Data transfer from functional location to installed piece of equipment
The ABC indicator of the functional location C1-B02-1 "Ventilator" is to be changed for several clarification plants.
The employee responsible for maintaining the master data makes the change in the master record of the reference functional location and saves the entries.
The system automatically makes the same change for all affected functional locations that were assigned to this reference location and for the pieces of equipment that are installed at these locations. The system then issues a message informing the employee of the changes.
Regards
thyagarajan

Similar Messages

What is the "Data Transfer Process" in the BI7.0, and how does it work?

Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !

HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks

Classification overview Data for the functional location in Emigall

Hi,
I am trying to upload the functional location for the connection object. and during that i would like to upload the Classification data through Emigall
Can i do that in emigall and do we have a function module or a BAPI for it.to do that.
Can anybody help me on this.
Thank you in advance.
Regards,
Robert

i don't think you can directly upload classification along with your functional location data in EMIGALL. But there is an object OBJCLS_D in EMIGALL that you can probably use. There is a BAPI BAPI_OBJCL_CREATE that may also be useful if you want to write your own program.

Hierarchical data transfer objects confusing Flex compiler...

I just posted this same query on FlexCoders... but then I
thought this might be a better target group to ask, so here goes:
We are working on a set of data transfer objects where we
have matching server-side java classes and client-side AS classes.
Some of these DTO contain lists of other DTOs. As an example:
A.java:
public class A {
List<B> blist
In A.as we have...
class A {
public var blist : ArrayCollection;
And we have B.java and B.as
Then we have a RemoteObject call to pull down a bunch of A
objects....
Here's the problem, Flex does not compile B.as at build-time.
So if B.as has a compiler problem, you never know about it,
except that the 'blist' in A never gets populated. If you break
down the data transfer and debug it. You find that during
RemoteObject call, the blist data comes "down the wire", but as an
ArrayCollection generic Objects, they never get turned into
instances of Bs...
I am guessing that this is happening because at compile time,
there is not direct reference to B in the clientside project. Our
covering .mxml wants one or more A objects, and inside A the blist
is an ArrayCollection. So the compiler doesn't see a reference to
B..
So anyone know how we can fairly seamlessly make sure B.as
gets compiled at build time so we'd know of compiler issues with it
rather than spending lots of time debugging mysterious null values?
(This appears to happen whether the project is set to compile
on the client-side or the server-side. We are using Flex and FDS
2.0.1 and Java 1.5)

up...

Error with data transfer in functional module

Hi all,
I need to upload file to the employee through BDS. (oaor transcation). i am using functional module
function zin_bds_dms_upload.
""Local Interface:
*" IMPORTING
*"     VALUE(P_CLASS) TYPE BDN_CON-CLASSNAME
*"     VALUE(P_OBJCT) TYPE BDN_CON-OBJKEY
*"     VALUE(P_DESCR) TYPE BDN_CON-DESCRIPT
*"     REFERENCE(P_PATH) TYPE SAPB-SAPFILES
data: begin of i_bds_conn occurs 10, " ITAB for the actual
         bdn_tab_i type num08,
        client type mandt,
        classname type      seoclsname,
        classtype     type bds_clstyp,
        objkey type bds_typeid,
        log_system    type swo_typeid,
        loio_id   type char42,
        doc_ver_no    type num08,
        doc_var_id    type num08,
        doc_var_tg    type bds_var_tg,
        descript    type sdok_descr,
        langu   type spras,
        comp_id   type bds_compid,
        mimetype type bds_mimetp,
        crea_user   type sdok_crusr,
        crea_time   type sdok_crtst,
        chng_user   type sdok_chusr,
        chng_time   type sdok_chtst,
        contrep   type bds_conrep,
        docuclass   type sdok_prv_m,
        doc_type    type sdok_prv_s,
        expirytime    type sdok_prv_m,
        bds_docid   type sdok_prv_l,
        loio_id_to    type sdok_loid,
        rela_id     type      bds_relaid,
        state   type sdok_phsta,
        bds_status    type bds_state,
        stor_tab type saearstat,
        bdn_tab_d     type bar_keep,
        note_type     type bds_state,
        objecttext type toasp-objecttext,
        objecttext2 type toasd-objecttext,
        objecttext3 type toasr-objecttext,
        ntext type tojtt-ntext,
end of i_bds_conn.
data: begin of bds_doctype_list occurs 10,
mandt type mandt,
classname type bapibds01-classname,
contrep type bapibds01-contrep,
docuclass type bapibds01-doc_class,
docuclass_text type toasd-objecttext,
doc_type type bapibds01-doc_type,
doc_type_text type toasp-objecttext,
appl_type type toadd-appl_type,
appl_type_text(50) type c,
standard type toadv-standard,
check_box type toadv-standard,
end of bds_doctype_list.
data: file_extension type toadd-doc_type, " file-extension
i_files type bapifiles occurs 1 with header line,
i_signature type bapisignat occurs 1 with header line,
logical_system type bds_conn00-log_system.
data: classname_select type bdn_con-classname,
classtype_select type bdn_con-classtype,
objkey_select type bdn_con-objkey,
mask(20) type c,
answer type c,
mimetype type toadd-mimetype,
i_toadd type toadd,
file_path type sapb-sapfiles,
filename_all type sapb-sapfiles,
file_path_memory(250) type c, " path für SAP memory
file_path_length type i, " length of the file_path
file_name type sapb-sapfiles.
classname_select = p_class.
classtype_select = 'BO'.
objkey_select = p_objct.
filename_all = p_path.
get parameter id 'OAP' field file_path.
if sy-subrc <> 0. " no file_path found.
    file_path = space.
endif.
concatenate ',.' '' ',.' '' '.' into mask.
-- split filename -- *
perform split_path(oaall) using filename_all file_path file_name.
-- set new file_path to SAP memory -- *
file_path_length = strlen( file_path ).
if file_path <> space and file_path_length < 250.
    file_path_memory = file_path.
    set parameter id 'OAP' field file_path_memory.
else.
    file_path_memory = space.
    set parameter id 'OAP' field file_path_memory.
endif.
-- check documentclass -- *
perform get_file_extension using file_name
file_extension.
-- check file extension -- *
if file_extension = space.
-> if no docuclass is found from the document
-> default docuclass from the doctype!
    file_extension = bds_doctype_list-docuclass.
endif.
-- get the mimetype of the docuclass -- *
perform mimetype_get(oaall) using file_extension
changing i_toadd.
move i_toadd-mimetype to mimetype.
-- fill file and signature structure -- *
clear: i_files, i_signature.
refresh : i_files, i_signature.
i_files-doc_count = 1.
i_files-directory = file_path.
i_files-filename = file_name.
i_files-mimetype = mimetype.
append i_files.
i_signature-doc_count = 1.
i_signature-prop_name = 'BDS_DOCUMENTCLASS'.
i_signature-prop_value = file_extension.
append i_signature.
i_signature-prop_name = 'BDS_CONTREP'.
if bds_doctype_list-contrep = space.
    i_signature-prop_value = ' '.                           "#EC NOTEXT
else.
    i_signature-prop_value = bds_doctype_list-contrep.
endif.
append i_signature.
i_signature-prop_name = 'BDS_DOCUMENTTYPE'.
i_signature-prop_value = bds_doctype_list-doc_type.
append i_signature.
i_signature-prop_name = 'DESCRIPTION'.
i_signature-prop_value = p_descr.
append i_signature.
i_signature-prop_name = 'LANGUAGE'.
i_signature-prop_value = sy-langu.
append i_signature.
-- create new document via KPro -- *
call function 'BDS_BUSINESSDOCUMENT_CREATEF'
    exporting
      logical_system = logical_system
      classname      = classname_select
      classtype      = classtype_select
      client         = sy-mandt
      object_key     = objkey_select
    tables
      files          = i_files
      signature      = i_signature
    exceptions
      internal_error = 1
      others         = 2.
endfunction.
*& Form GET_FILE_EXTENSION
try to get the extension of the uploaded file
form get_file_extension using file_name file_extension.
-- data declaration ------------------------------------------------ *
data: length type i,
single_c type c.
data: begin of bds_doctype_list occurs 10,
mandt type mandt,
classname type bapibds01-classname,
contrep type bapibds01-contrep,
docuclass type bapibds01-doc_class,
docuclass_text type toasd-objecttext,
doc_type type bapibds01-doc_type,
doc_type_text type toasp-objecttext,
appl_type type toadd-appl_type,
appl_type_text(50) type c,
standard type toadv-standard,
check_box type toadv-standard,
end of bds_doctype_list.
clear: single_c.
length = strlen( file_name ).
if length > 0.
    while length > 0.
      single_c = file_name+length(1).
      if single_c co '.'.
        length = length + 1.
        exit.
      else.
        length = length - 1.
      endif.
    endwhile.
    if length > 0.
      file_extension = file_name+length.
    else.
      file_extension = space.
    endif.
else.
    file_extension = space.
endif.
if file_extension <> space.
    set locale language sy-langu.
    translate file_extension to upper case.              "#EC TRANSLANG
    set locale language space.
endif.
endform.                    "get_file_extension
example : class = PREL
object = pernr_no
desc = 'leav application'
p_path = file_path
I used this in abap program then it is uploading fine but when used in the web dynpro file is not uploading. On debugging it is showing error in function module SDOK_PHIOS_CHECKIN
error key 5 ie error in transfer.
So please suggest how to upload in web dynpro abap.
Edited by: Bhavya belagal on Dec 22, 2010 11:55 AM
Edited by: Bhavya belagal on Dec 22, 2010 12:09 PM

Hallo Bhavya,
Please do not post like this as it is not readable . Mostly when you describe it in a simple manner you would get more response.
See this thread for answers from Thomas Jung [Re: Approach content repository other way then URL approach|Re: Approach content repository other way then URL approach]
Wiki [http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass|http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass]
Edited by: Baskaran Senthivel on Dec 22, 2010 2:42 PM

What is the Data limit we can transfer from an iview

Hi All
     What is maximum data transfer from an iview ?
     Is there any specific setting we need to do ? Can we increase the Data limit?
Thanx in advance
Prasad K

Hi
    Clearly ...If i create an iview for SAP R/3 system ...so howmuch data i can
    transfer to R/3 from portal.
    I hope some one can help me on this
Advance thanx and points
Prasad K

Genral question on equipment and functional location....

hi,
what I have to learn on functional location and equipment other than the below concepts
creating euipment and installation,
and customizing like screen sequences of Fun. locations and equipment....
and field selection for functional locations and equipment...
stucture indicator for F locations...
category of functional locations and equipment...
becoz i am going to allot for a project more over this is my first proect.......
Plz help me.........,
thanks in before
gunnu

Hi,
Under Equipments:
1. Equipment Master Data
2. Equipment BoM
3. Measuring Point
4. Serial Number Assignment
5. Installation / Dismantling with Superior Equipment / Functional Location
6. PRT as Equipment (Production Resource Tools)
7. Fleet Equipments
You can find all the helps in Help.sap.com under Plant Maintenance module. Just have a search in google.
[Equipments & Technical Objects|http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 28, 2011 1:10 PM

Data transfer cost

If I exec a sql command outside azure on another server like
sqlcmd -S sld51cxbyz.database.windows.net -U bleetmaa@sld51cxbyz -P Kj73Bh71D -d MigrationFromAX -Q "exec dbo.runAzureDbJobs"
runAzureDbJobs is a bunch of procs who is merging two tables located inside azure.
What will the data transfer cost? Does the procs executet inside azure or will the data transfer between the external server and azure?
bleetmaa

Hi,
If you Work role and your sql database in the same region, you are not charged.
see this:
Is data transfer between Azure services located within the same region charged?
No. For example, an Azure SQL database in the same region will not have any additional data transfer costs.
If they are in different regions, you could be charged .
Is data transfer between Azure services located in two regions charged?
Yes. Outbound data transfer is charged at the normal rate and inbound data transfer is free.
See the pricing Page:
http://azure.microsoft.com/en-us/pricing/details/data-transfers/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help required: class assignment and values for functional location

Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

How can I check the data transfer rate of my FW800 port

I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?

When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.

ILOM0001 - functional location description (pltxt)

Hi,
problem:
the (same) description (PLTXT) of functional location has to be saved in TWO different languages every time any change is done on a functional location AND save is (pressed) processed.
User exit ILOM0001 is already implemented and can be used for further enhancements.
Open for any suggestions.
Thanks a lot for any response.

Thanks so far.
@Dwaraka
I already thought about a direct update of the IFLOTX table. But I also learned (: NOT to access standard SAP DB-Tables directly!
The user exit ILOM0001 is used only be the one project. So no issues on that end.
@Pete
It's not causing a problem -> I have to realise the proper saving/update of the same description in two different languages every time the 'SAVE' is processed.
Users can logon in (2) different languages (international company). But in EDIT mode for the technical object (func. location) the description value has to be the same!
Did I answer all your questions?
Thank's for further replies.
Eduard
At last the problem was solved. (not that nice - but anyway)
- The functional location is created (and saved) using SAP standard BAPI's.
in the User Exit i put coding which INSERTs the same PLTXT (with respectively other language code) using SAP update function module for IFLOTX. this part runs only if transaction (sy-tcode) IL01 or a specific condition are set.
- During the process the user (always!) needs to modify some Data of the functional location. [1. SET PARAMETER ID ifl FIELD f; 2. call transaction IL02 and skip first screen]
in the User Exit there is bapi call - something like IFLOTX_UPDATE or - the existend PLTXT is copied into the Importing structure of the function module and the language is switched . The text is then modified after COMMIT WORK
It's probably not the best way - but it worked.
Edited by: Eduard Reidel on Sep 15, 2009 6:34 PM

Two Data transfer methods

Hi Gurus
Can any body tell if i will be asked like What are two data transfer methods? Which is the preferred method and why?
thanks in advance
murali

Hi,
The two data transfer methods are PSA and IDoc. In PSA, the number of fields is limited to a maximum of 255 when using TRFCs to transfer data. The length of the data record is limited to 1962 bytes when you use TRFCs.
refer this help link
http://help.sap.com/saphelp_nw04/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Regards,
R.Ravi

Assign equipment from hierarchy to functional location

Hi all,
I'm new to PM so the question might be a bit stupid. But I have got a hierarchy for a piece of equipment. The highest level is a recorder. The lower levels are sensors that i need to calibrate. I now want to assign the sensors (lower level) to functional locations. It can be possible that each lower level is assigned to another functional location. Is this possible? I now get the error message that the piece of equipment is assigned to a hierarchy.
Thanks for your help

This can be achieved but obviously the equipment hierarchy would be disturbed because the equipment can either be installed on a functional location or a superior equipment not both the two. What you can do is the functional location for the superior equipment is to be extended so as to cover the subordinate equipments and obviously there would not be any direct link between the equipment and the superior equipment.
Equipment: Recorder installed on FLoc: Plant-Recorder
Equipment: Sensor installed on Floc:Plant-Recorder-Sensor
that is how you can achieve it but the relationship between the equipment and superior equipment is to be compromised.
Regards..

MAM25 Equipment (de) installation to functional location

Hi Guru's,
We are trying to uninstall an equipment from a functional location and then reinstall the same equipment to another functional location, however this does not always work for us.(mam25_030)
It seems to work, when the uninstall happens before the installation. It fails when installation happens before the uninstall. This is however dependend on the order on which the syncBO's are being handled, or so it seems.
- Floc with synckey 1 - uninstall equipment
- Floc with synckey 2 - install equipment
this works
But if the order is this:
- Floc with synckey 2 - uninstall equipment
- Floc with synckey 1 - install equipment
Has anyone come across this feature, and/or has a solution for this. Is there a way to influence the order of the syncBO's?
Thanks,
Karst
ps. Running on MAM25 SP15

This can be achieved but obviously the equipment hierarchy would be disturbed because the equipment can either be installed on a functional location or a superior equipment not both the two. What you can do is the functional location for the superior equipment is to be extended so as to cover the subordinate equipments and obviously there would not be any direct link between the equipment and the superior equipment.
Equipment: Recorder installed on FLoc: Plant-Recorder
Equipment: Sensor installed on Floc:Plant-Recorder-Sensor
that is how you can achieve it but the relationship between the equipment and superior equipment is to be compromised.
Regards..

PM Notification contains functional location after dismantling

Dear Gentlemen,
We are facing the following problem.
An equipment is installed on a functional location.
A maintenance notification is created for the equipment.
The maintenance notification automatically takes on the functional
location number.
Now an order is created for the functional location that does NOT refer
to the notification mentioned. With a reservation referring to the orderthe equipment is dismantled from the functional location with transaction
IE4N.
The equipment is now in stock and no longer installed on the functional
location. However, the original notification still refers to the
functional location.
When we execute transaction IW28 (overview of notifications for the
functional location) the notification is still displayed in spite of thefact that the notification is for the equipment that does not belong to
the functional location anymore.
Is there a way to remove the functional location automatically from the
notification for the equipment after the dismantling operation has takenplace?
Thanks a lot and best regards
Pierre Peeters
Steps for Reconstruction
1) Equipment installed on functional location
2) Transaction IW21 to create a notification for the equipment
3) Notification contains the functional location
4) Transaction IW31 to create an order the functional location
5) Enter the material of the equipment as a reservation
6) Release the order with transaction IW32
7) Transaction IE4N to dismantle the equipment from the functional
location with reference to the reservation from the order
8) Transaction IW28 to display all notifications for the functional
lcoation. The notification is still displayed but the equipment is no
longer installed on the functional location!

Hi Pierre,
The Procedure followed by SAP is to maintain the state of equipments during creation of the notification. The process in the notification is before dismantling of the equipment so standard process says you should complete the noitification rather than changing the equipment in the notification.
Now for better explanation, can you just specify for what case the notification is created? And what is the problem if the functional location is not removed?
Regards,
Chin2

What is hierarchical data transfer in functional location

Similar Messages

Maybe you are looking for