What is Hotspot Mode in the Graphics toolbar?

I am new to FrameMaker and am trying to figure out what the Hotspot Mode is for. Thanks.

And if you like listening to the narrator of the video...  I'll be doing a series of 5 Adobe TCS webinars between now and the end of August. The first is starting at 10am Pacific today. Make sure to tell any colleagues that use Fm, Rh, Cp, EPUB.
How-To Webinar: FrameMaker DITA output to PDF — adobe.ly/14ZzI3E
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11

Similar Messages

  • Graphics toolbar stuck in horizontal mode

    Hi,
    They just installed Frame 12 on my Windows 7 laptop.
    When I first opened Frame, the graphics toolbar opened vertically. As I was moving it around, it accidentally jumped into the toolbar area at the top of the window and turn horizontal. After dragging it back into the empty part of the window, it stayed horizontal. I can't find any feature on the graphics tool bar to change it back to a vertical layout.
    How do I fix this?
    Yours,
    Michael F
    =======

    It's vertical again, but it makes no sense.
    I was dragging the graphics toolbar around the screen and dragged it over the catalog panel on the right side when suddenly it flipped to vertical and the minute double caret controls reappeared. The toolbar now flips either way and retains the controls.
    This seems like a part of the UI is out of control when it takes accidental behavior to fix a problem.
    Yours,
    Michael F
    ========

  • What has happened to the graphics in my emails??

    What has happened to all the graphics in my emails?

    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    You can check for problems with the places.sqlite database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

  • Why does Graphics Toolbar continually reset itself?

    I have used FM since version 5, but since FM9, the Graphics Toolbar continually resets itself to the defaults so that you need to constantly set the various tools that you use the way that you want them (color RED, line 3pt, line with arrow at one end, etc).
    Is this a bug? Or is there a way to make it stay the way that you set it? I use this Toolbar all through the work day, and it gets very irritating to have to constantly change how I want it.

    Nope, unfortunately never been able to do that. I use the Graphics Toolbar sporadically while documenting manuals. It will be OK for multiple times of using it, then the next time that I need to use it, Bingo--I see that it has reset everything back to defaults. To determine what causes it, I would have to watch it after absolutely everything that I do, which I've actually tried to do. It doesn't seem to happen by simply saving a file or opening another file while the one that I'm working on is still open.
    It could be an insidious bug that is caused by the user performing a series of steps and not just one thing. In any event, I'm surprised that no one else has experienced this. Am I simply a more prolific user of the Graphics Toolbar and, thus, prone to stumbling on a hidden bug?

  • My graphics toolbar has disappeared (FrameMaker 11 on Windows 7).

    My graphics toolbar has disappeared (FrameMaker 11 on Windows 7).
    In View > Toolbars, the Graphics Toolbar item is checked.
    Clicking Graphics > Tools does nothing whatsoever.
    HELP!  I need to get the graphics toolbar back.

    Matt, Thanks for responding.  I finally found the graphics toolbar. It was docked--and hidden--in the row at the top with all the other shortcut icons. It was so far on the right that it was out of sight. It was revealed only after I (accidentally) stretched the FrameMaker window way out to the right and into my second monitor.  I apparently docked the toolbar there without realizing I'd done it. 

  • What is PC mode?

    This was asked by someone else before but never answered as far as I know. What is PC mode in the media share app? It seems to be redundant with the USB memory management option that pops up when you connect to a PC with a USB cable.....except that it does NOT work right when one tries to move files or folders. Only the USB memory manager worked for me.

    I've used android and developed for it for awhile (since G1), so I am sure this is a remnant of a earlier time. The USB notification drop-down option is the new better way. This was probably left in to support legacy apps as they make/made the switch, I would expect it to be dropped as the new android versions and new apps are released.

  • When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Websites remembering you and automatically log you in is stored in a cookie.
    *Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    *Tools > Options > Privacy > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear Cookies
    *do not clear Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

  • Qosmio X305 will only boot in safe mode or when the graphics card disabled

    Hi All
    I am having a very concerning issue with my laptop (Toshiba Qosmio X305). It will only boot in safe mode or if I disable the graphics card.
    Awhile back I upgraded the drivers for the nVidia 9800M GTX from the nVidia website, it worked fine for awhile, but then it started crashing randomly by giving me a full screen of random color then switching off. I fixed this by rolling back to the previous version of the drivers (the drivers that came with the laptop software).
    After that it working perfectly for months but yesterday my machine started crashing and I could not get it to boot correctly.
    I have completely deleted (not just a quick format) both the hard drives that came internally in the laptop and I have installed a clean version (the out of the box option) of the x64 Vista that came with the laptop from the recovery disks I created. After I did the install, it boots fine as only the standard VGA device is used, as soon as I installed the driver off the drivers and applications disk it would not boot correctly:
    Just after the status bar comes up and it is about to show the windows logo, just before login, I get a black screen. I can hear that it is booting fine and I can even log in to windows and by memory make things run, but I can't see anything. I then got the latest drivers, again from the nVidia website and they are not helping at all.
    My system is as follows (nothing has been added, its is just how I got it):
    Vista Ultimate x64
    4.00 GB RAM
    Intel Core 2 Quad
    Like I said previously it is a clean install of the operating system, I have not added any programs, except for installing and then updating the display drivers.
    Any help would be much appreciated!

    Hi buddy,
    It seems that this is a typical example, that only pretested display drivers from Toshiba should be used. Why?
    The nVidia drivers are not pretested and they dont have an overheat protection. So for me it sounds like that the nVidia driver has destroyed your graphic card. That means no driver will help you and reinstallation of the whole system too.
    I think the only option is replacing the graphic card. Therefore you should contact an authorized service provider in your country. Here you can search:
    http://www.csd.toshiba.com
    Explain the whole story and then you will see, what the technicians say. If your notebook is under warranty, hopefully this will be covered too. Normally other display drivers you have to install on your own risk
    Good luck! :)

  • I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    ?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    pkg4ibm wrote:
    editing a url on the graphic...
    Not sure what you mean by that: is that URL in an image, or is it actual text?
    If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
    If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

  • After stand-by mode screen turns green or the graphics get messy - Satellite M100-165

    When i leave my laptop for more than 20 minutes on stand by mode and i try to activate it again the screen turns green or the graphics get messy.
    In order to work i have to reset and turn on again. Does anybody know what can i do about this issue?
    Thanks in advance.

    Very strange your description.
    Did you try to update the BIOS or the graphic card driver?
    If not so please check the available versions on the Toshiba driver page and if these applications are newer so try to upgrade it.

  • I was in full screen mode and now that I have exited, the main toolbar for Safari is gone.  So please don't say go to View.  Each time I click off of safari to the desktop, it shows me the Finder Toolbar.  I have opened and closed Safari many many times.

    I was in full screen mode and now that I have exited, the main toolbar for Safari is gone.  So please don't say go to View.  Each time I click off of safari to the desktop, it shows me the Finder Toolbar.  I have opened and closed Safari many many times.

    No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
    With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
    further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

  • HT6058 I started to down load the update and (7.0.4) and got disconnected now my Iphone 5 is looking for itunes but I can not log on because my hotspot is on the phone.  what do I do?

    My phone started to download IoS 7.0.4 with my hotspot on the phone from itunes.  I have no internet connectivity and the phone will only display connect to iTunes on the screen.  What do I do?

    You will need to find a place where you can connect the computer to the internet so you can restore the iPhone - no way around that at this point.
    Were you using your iPhone's hotspot as the internet connection for the computer to download and install an update on that very same iPhone that was providing the internet connection?  If so, honestly, that was not a smart thing to do at all.  In order to apply the downloaded update,the phone had to restart and disconnect - it could not possible install an update without doing that.
    Regardless, it is now in recovery mode.  The only way to recover it is to restore it with iTunes on your computer and that will require an internet connection.

  • How do you stop photoshop from flickering when the graphics processing mode is set to basic? (Using windows 8)

    I am using Photoshop CC (2014) and I can not get the screen to stop flickering even when I set the graphics processing drawing mode to basic ( which is what other people have suggested to do). I am using windows 8.

    Update your video card driver from the GPU maker's website.

  • I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    It is now confirmed  that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This might be of some interest to you at this time: Life After MobileMe.
    OT

  • Ipad air 2 there's no silent mode like the other iPads ?? the button that does it does not exist on the iPad air 2 what does replace it??

    ipad air 2 there's no silent mode like the other iPads ?? the button that does it does not exist on the iPad air 2 what does replace it??

    hi the older button could be set to either "force portrait mode" or "silent mode". now you can do both in the iOS control center (swipe from the bottom of the screen), so the need for a button isn't needed anymore.

Maybe you are looking for