What is iMessage error code:0732-3334-3378?

What is iMessage error code:0732-3334-3378? Does this mean that iMessage is not supported on my late 2008 MacBook?

Run Disk Utility and repair your permissions. After that, restart with Command-S, and, when black screen appears, write:
fsck -y (remember the space, and, as for - , you get it holding down the ' key). Hold down Enter key.
Waiting for repairs, and repeat that command line again. Then, type: reboot and Enter key. You restart normally. See if your problems are gone.

Similar Messages

  • TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

    itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
    I get the following:
      (1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
      (2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
      (3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
      (4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
    Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
    I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

    Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

  • To what does G4 error code post16/4609 refer?

    to what does G4 error code post16/4609 refer?
    G4 MDD 1.42 PPC passes all hardware tests but gives post16/4609 error at start up.
    What does it mean?
    What is the resolution?

    I don't get any unhappy beeps.
    I get the chime. If I am not patient restarting I get high speed fan - I shut off be patience restart and get chime and search for drive then circle slash. hardware test gives me the master post 16 / 4609. - suggesting a bad drive according to other apple pundits. However, I have put two new 250GB WD drives in and still get a mass storage error. My G4 Mdd 1.42 supports drives 128GB+. I've replaced IDE cables and have master drive with out a jumper and have tried slave at CS and 3/4 slave setting all with the same result.
    Target boot got me to the "firewire drive" showed me one unformatted 250GB drive and I used disc utility to partition it according the PPC settings. Still same error.
    What gives?

  • What is the error code mean? And how to solve it ?Please give your answer. Thanks

    What is the error code  mean? And how to solve it ？Please give your answer. Thanks
    Attachments:
    QQ截图20140403134626.png ‏59 KB

    duplicate post
    LabVIEW Champion . Do more with less code and in less time .

  • What is the error code -5010D

    what is the error code -5010D

    A little Googling seems to indicate a hard drive problem, which sounds right given the symptoms you're seeing. Make sure you've gotten a good backup of everything. The good news is hard drives are cheap and easy to install. You can look up the procedure for your machine at ifixit.com.

  • What is the error code:0x80020042?

    what is the error code:0x80020042?

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • What's the error code: 1661 during the IOS5 restore?

    what's the error code: 1661 during the IOS5 restore?

    What country are you in, and are you trying to use another country's store ?

  • Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235

    Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
    Fans are running permanantly and this is the error I get when running apple hardware test.

    SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
    Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink.

  • Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

    What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！                                               
    ——1110340026
    Attachments:
    QQ图片20140403140655.jpg ‏108 KB

    Sannieboyyyy wrote:
    Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
    Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
    Here are the problems with the VI:
    If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
    You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
    Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
    Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
    LabVIEW Champion . Do more with less code and in less time .

  • When synchig my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    When synching my iphone to my itunes, I get an error message at the end with code 1150.  What is this error code and what does it mean?

    try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

  • What does the error code 0x80090318 mean connecting to IStore?

    What does the error code 0x80090318 mean connecting to IStore?

    I think the problem was using a WPA2 network rather than a WPA network. When I tried connecting to a WPA network, everything went fine.

  • HT201210 what is the error code 1051 im trying to fix the iphone 3G it keeps telling me to conect to itunes it starts to install the gives me the error code

    what is the error code 1051 im trying to fix the iphone 3G it keeps telling me to conect to itunes it starts to install the gives me the error code

    I suspect you meant 1015, not 1051. You have a jailbroken phone. you can't get help here.

  • TS3297 What is the error code 6003 means

    What is the error code 6003 means

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • TS2446 What's the error code 1009 means ?

    What's the error code 1009 means ?

    What country are you in, and are you trying to use another country's store ?

  • For itunes what is 13014 error code

    what is 13014 error code for itunes mac

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

Maybe you are looking for