What is iMovie error code -49? I get when I try to share my edited video in 720p with i tunes.

I edited a homevideo on my new mac Book pro 15-inch. When I tried to share in 720p with iTunes I get a message that says it can't prepare it and gives error code -49. Does anyone know what that means? I have abour 90 GB disc space, so that can't be the problem.

Hey,
A lot of times iMovie does that when you are trying to prepare a large file. Try to do the same thing in to iTunes as a Mobile or a Medium file and see if it exports fine?

Similar Messages

  • I am making a movie on iMovie for a math project but when I try to share it on iDVD it says there is an error (-50)???

    I am making a movie on iMovie for a math project but when I try to share it on iDVD it says there is an error (-50)???

    While we all have MacBooks in this forum not all of us use iMovie. There's a iMovie Support Community where everybody uses iMovie. You should also post this question there.  https://discussions.apple.com/community/ilife/imovie
    And the iDVD forum https://discussions.apple.com/community/ilife/idvd

  • Why does error code 4005 pop up when i try to restore my ipod 5?

    why does error code 4005 pop up when i try to restore my ipod 5?

    Have you tried this support article ?      http://support.apple.com/kb/ts3074

  • I uninstalled and reinstalled but at the end of installation there were erros.  See attached screen shot.  I now cannot open the application.  error code 10810 comes up when I try to open.

    I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors.  See attached screen shot.  Now I cannot open the application.  Error code 10810 comes up when I try to open (see 2nd screenshot).  Please help.  I have now lost photoshop altogether whereas previous at least I still could use it but could not update.  Thank you for any help to instal successfully.  Dr Koh

    Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
    ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
    Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
    Dr Koh

  • What release level of code do you get when you download a disk image (ISO/IMG) of a click-to-run Office 2013 product?

    I’ve asked a similar question to this on an Office Community Forum but nobody knows the answer.  So
    I was hoping that an IT professional responsible for installing and deploying Office 2013 might know.
    If you download an installation disk image (ISO/IMG) of a click-to-run Office 2013 product from office.microsoft.com/myaccount (Account Options:
    Install from a disc > I want to burn a disc), what release level of code do you get? 
    Now that Service Pack 1 is available, do you get a disk image with Service Pack 1 incorporated? 
    Or do you still get the RTM (Release to Manufacturing) level of code?

    Diane, thank you for the reply.
    I was hoping that someone who has downloaded a disk image since SP1 became available would be able to confirm that for a fact.
    I have just found a good description of Click-to-Run on Technet that I didn't know existed.  The link is: http://technet.microsoft.com/en-us/library/jj219427(v=office.15)
    The article states:
    "Click-to-Run products that you download and install from Microsoft are up-to-date from the start. You won’t have to download and apply any updates or service packs immediately after you install the Office product."
    This statement is probably true if you click the Install button on office.microsoft.com/myaccount and install "in real-time" over the Internet.  However, I know for a fact that it is not true if you order a backup disk (Account
    Options: Install from a disc > I want to purchase a disc).  All you get is RTM level code (15.0.4420.1017).
    So I still feel uneasy about what release level you get if you download a disk image.  I don't want to download what might be the better part of 1GB of code over the Internet only to discover it is back level.
    Addendum (6 April 2014): I decided to perform an experiment.  I looked at the size of the data on my backup disk which contains RTM level code.  It is 2.04GB.  I then went to office.microsoft.com/myaccount and clicked to download a disk
    image of my Office 2013 product.  The pop-up window that asks me whether I want to Run or Save the file informed me that the size of the file is 2.04GB!!!  I cancelled the download.  I strongly suspect that, if I had continued with the
    download, I would have received the same RTM level code I already have dating back to October 2012.  I think this is awful customer service.  To some extent, I can understand the logistical problems of replacing backup disks lying in warehouses
    waiting to be shipped.  But I cannot understand why disk images on download servers cannot be refreshed quickly.

  • I keep getting Error Code 4002 in iTunes when I try to update my iTunes Match.  I have turned off iTunes Match, then reinstalled it, but that does not seem to work.  I also get another Error Code (4010) sometimes.  Can someone offer advice?

    I keep getting Error Code 4002 in iTuens when  try to update my iTunes Match.  I have turned off Match, then reconnected, but the code keeps coming.  So does Error Code 4010 at times.  Can someone help?

    iTunes store, App Store, iTunes Match and various other services have been down for the past several hours. Apple's System Status page at http://www.apple.com/support/systemstatus/ now shows them back up but they are STILL NOT up for me or many other users. The error codes 4000 series refer to connection errors, I've gotten several from 4001-4010 all day. We're kind of at the mercy of Apple at this point. It would be nice if they would give us some notification about their problems since we are paying for their service.

  • I get an error code (13041, this time) when I try to download Adobe Reader version 10.1.0

    My system is still using Windows XP. My banks and epost insist that I must use Adobe Reader, so finging a way to install it without error codes hampering the installation would be appreciated.

    This error stands for extract files memory error.
    Do not use EXE version - search this forum for FTP link, download and install MSI version of Reader 10.1 installer.

  • Error code: ssl_error_no_cypher_overlap comes up when I try to veiw the log in screen on tumblr, how to fix this in FireFox 26.0?

    I can browse through tumblr just fine, but whenever I go to the login page it said:
    Secure Connection Failed. An error occurred during a connection to www.tumblr.com. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
    I understand that tumblr has certification errors but that never happened to me before I until I upgraded to Firefox 26.0. I like FF and I don't want to use any other browser.
    How to fix this?

    Does it help if you either disable SSL3 or disable TLS as a test?
    security.tls.version.min = 1 and security.tls.version.max = 1 disables SSL3 and enables TLS 1.0
    security.tls.version.max = 0 and security.tls.version.max = 0 enables SSL3 and disables TLS 1.0
    Type <b>about:config</b> in the location (address) bar and press the <i>Enter</i> key to open the <i>about:config</i> page like you open a website by typing the URL in the location bar.
    *If you see a warning message then you can confirm that you want to access the about:config page.
    *http://kb.mozillazine.org/about:config
    See:
    *http://kb.mozillazine.org/security.tls.version.*
    0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.
    You can try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
    If that helped to solve the problem then you can remove the renamed cert8.db.old file.
    Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.
    Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
    If that didn't help then remove or rename secmod.db (secmod.db.old) as well.

  • Error code -32731 pops up when I try to move files onto LaCie External HD.

    I have a Macbook Air 2014 with i7 and 8gb ram. I have around 20gb left on the internal hard drive.
    My current OS is Yosemite, 10.10.2.
    I'm unable to paste/move files to my external hard drive and am instead presented with error code -32731. The exact message reads:
    "The operation can’t be completed because an unexpected error occurred (error code -32731)."
    Related, it seems as if I can't download files directly to the hard drive. In many ways it seems as if I can't write to the drive at all. However, I have those permissions when looking at info.
    Any ideas? Thank you very much.
    Chris

    Some other things to look at.
    https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

  • TS3297 What is Error 8201 that I get when I try to download songs from iTunes?

    Anyone help?

    See if either of these threads help fix it :
    https://discussions.apple.com/message/17237169#17237169
    https://discussions.apple.com/message/18957739#18957739

  • I receive an error code:5,157,69 when I try to scan using my MX922. It is connected via wireless

    I have my new MX922 connected to my home network via wireless. When I attempt to scan photos I receive an error message stating that the scanning software was unable to communicate with the scanner. Code:5,157,69.
    I have no issues when printing or faxing it is only the scanning function. I am using the Canon supplied software - My Image Garden - to do the scan.
    Please advise.
    Solved!
    Go to Solution.

    Hi!
    To ensure the most accurate information is provided, we will need to know the version of Windows or Mac in use.
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • My iPod won't sync, and an error code 13019 appears. When I try to restore my iPod, error code 3194 appears.

    Itunes is up to date. I have a 2nd generation iPod touch.

    Try this previous discussion:
    https://discussions.apple.com/message/16782232#16782232

  • After trying all suggested fixes, download error - javascript application still occurs when I try to download using Ant video downloader - help?

    This started after the latest security update for Firefox26 self installed. I have tried all of the suggested fixes; restarting in default mode, un-installing then re-installing the Ant video down loader etc all to no avail. How do I fix this?

    Ant Video Downloader 2.4.7.11 is a Firefox add-on that doesn't look like it's been updated yet for Firefox 26. See https://addons.mozilla.org/en-US/firefox/addon/video-downloader-player/
    The best I can suggest is to contact the add-on developer.

  • HT201250 what does reported "error code 6584" mean ?

    What does reported "error code 6584" mean ? when trying to get into my time machine back up.

    First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
    1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
    2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
    3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
    4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

  • TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

    itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
    I get the following:
      (1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
      (2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
      (3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
      (4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
    Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
    I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

    Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

Maybe you are looking for