What is included with a NEW Time Capsule

When you open that box and unpack your brand new TC what all is included?

- Time Calpsule
- Power Cord
- 2 CD Disks and thats all and an instruction manual
Hope this helped!
http://discussions.apple.com/thread.jspa?threadID=1506817&tstart=0

Similar Messages

IMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that.

What to do with an old Time Capsule?

I just retired a 5 year old Time Capsule after replacing it with a new 2 TB model.
What could I do with the old one?
Would it be good for extending improving my home network? Existing network seems pretty fast with the new time capsule. Would using the old one on the network slow things down?
Would it make sense to connect it to a Blu-Ray player and use it instead of wifi?
Anything else come to mind?
I have enough doorstops.
Thanks for the advice.

Sell it on ebay.. it is due to die very shortly.. wipe the hard disk and dispose..
Or as suggested to a friend.. it is worth very little. You got your money's worth out of it.

With the new Time Capsule does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

With the new Time Capsule 5th Gen does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

does the beam forming occur with multiple clients
Yes, but Apple is unclear about how many cients can be connected simultaneously with this feature.
do these clients have to be 802.11ac compatible?
Yes

HT1515 How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

How do I use Back to My Mac with a new Time Capsule if I don't have a MobileMe account?

I just got a new time capsule and I'm trying to set it up so that I can remotely access the files when I'm at work/on the go etc. Now I have an iCloud account, but I don't have a MobileMe account. I do have an @me.com address because I enabled Mail thru the iCloud pref pane and I setup the @me.com email address but I'm still not able to use back to my mac.
I am running the latest fully updated version of lion on the latest model air, working with a 2TB 4th gen time capsule

See the following:
Back to My Mac- Supported router devices
Mac OS X 10.7 Help- Use Back to My Mac
Mac OS X- Using and troubleshooting Back to My Mac with your iCloud account on OS X Lion
Setting up and using Back to My Mac with an 802.11n-based AirPort base station, or Time Capsule
What happens to Back to My Mac after I move to iCloud?
Mac OS X 10.7 Help- Share your computer’s screen using Back to My Mac
What happens to Back to My Mac after I move to iCloud?

Trouble communicating with My new Time capsule 1TB

I am having trouble picking up the new time capsule that we got all other computer we have are picking up fine

You may need to update 10.4 to the current level (10.4.11) to get a response. your profile says you are at 10.4.3.
This is from the Time Capsule system requirements:
For shared hard drive: Mac with Mac OS X v10.4.8 or later

Time machine not connecting with new time capsule

Will someone please help? I have just recently joined the MAC family and purchased a new Macbook along with a new time capsule. It took unbelievably long to get things running (ie wireless access with 2 other PC based desktops and a PC laptop and shared network printing with an USB connected printer to the time capsule)- I thought macs were supposed to be easy?! Anyways, the only thing that I cannot figure out is how to properly set up time machine. I follow the instructions and turn time machine on, choose my backup disc (which is the time capsule), but when I click "use for backup", I keep getting the "connection failed- server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again" What am I supposed to do now? What is there to check when all of the other computers are able to access the internet (including the Macbook) and wirelessly print. The stupid timecapsule router function is working but the backup portion of it is not???!!!! Please help someone who is about to give the mac and the time capsule to the first person walking down the street - it has been a frustrating 2 days.

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click
Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

The new Time Capsule is amazing

I just got my new Time Capsule with 2TB storage. It replaced the previous generation Time Capsule, again with 2TB of storage.
In my network I have a Retina Macbook Pro (early 2013 model) and a 11" Macbook Air (mid 2013). My internet connection is 150Mbit/sec download and 5Mbit/Upload.
With the previous Time Capsule my rMBP would achieve a maximum of 15MB/sec download and my MBA 16,5/sec.
Now, with the new Time Capsule, my rMBP achieved a whopping 17MB/sec!!! I still haven't tested the MBA, but I am confident it can achieve up to 18MB/sec (my maximum download speed).
I can only say that I am amazed how good the new Time Capsule is. Kudos to Apple!

The Gen1 hard disk was a noisy beast although you would have to be up close to hear it still. Modern slow green drives are much better and run cooler.
The new TC runs the standard WD green drive.
See the review here which has a tear down included.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
The problem in Gen1 was a philosophy and a take over by the Interior Decorators at Apple rather than the Engineers. The excellent fan control built into the unit was dismissed as Overheated Engineer Imagination.. OEI for short. The fact that they stuffed a hard disk and power supply into a box slightly bigger than the Extreme.. had nothing to do with subsequent problems.. gollum.. gollum.. according to the Interior Decorator department. Engineers did actually calculate the reactor melt down temperature and turned on the fan to prevent said event.. they turned it on at 100% speed and 100% noise. Because it was seconds away from disaster..
Gen4 the design finally used the fan properly and offers some proportional control.. but you cannot expect no noise out of a plastic box dissipating 30W when it is doing the full job, backups, routing, wireless, gigabit. It still fails in having no fresh air inlet. So stand it on feet to stop the heat build up underneath.
During normal duties though and in normal weather.. you will hardly ever hear it.

New Time Capsule does not see Airport express

Hi
We purchased A new Time Capsule but are not able to get the existing Airport Expresses to work with it. I tried looking for the AE with AIrport Utility and cant see them.
Any idea how to get these to work with our new Time Capsule 3 TB? My Airpot Utility is Version 6.2
Thanks
Jenny

I've reset one of them. no luck
Suggest that you try the following if you have not already done so.
Power down the AirPort Express (AX) for a few moments
Hold in the reset button and keep holding it in for 10-12 seconds while you plug the AX back in to power
Release the reset button and allow 40-45 seconds for the AX to restart to a slow, blinking amber light
Move the AX near your Time Capsule and computer
Temporarily, connect a spare Ethernet cable from your computer to the AX
Open AirPort Utility to configure the AX
If you do not have a spare Ethernet cable handy, the AX is broadcasting a wireless signal with a name like Apple Network xxxxxx. You must first connect to this network from your computer.
Then, open AirPort Utility. You may be asked to "switch" networks so that AirPort Utility can connect
If you use the recommended Ethernet cable method, you can disconnect the Ethernet cable once the AX has been Updated. Then, move the AX to the desired location.
Configure the second AX like you did the first.
If you have the older "b/g" version of the Express devices, unfortunately you will need to configure the Time Capsule and Express devices to Participate in a WDS network if you need to enable the Ethernet ports on the AX devices.
This will result in the Time Capsule being changed to a "g" wireless router, since WDS will only operate at "g" wireless speeds.

I have replaced my old Mac Mini with new one. What should I do about my Time Capsule?

With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space. I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine.
I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive.
When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini.
I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer.
My inclination is to clear out the contents of the Time Capsule now and start all over again.
I have looked through information provided by Apple but not found answers to my questions.

The situation concerning the hard drive is complicated. It is not included in the list of Excluded Items.
If the drive is not "Excluded", then it must be included. That is the way that Apple's software works.
But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
Sorry, I do not understand what you are trying to say here.
What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
have not seen the 'Quick Erase' option.
You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk. The Quick Erase option will appear.

I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

What is included with a NEW Time Capsule

Similar Messages

Maybe you are looking for