What is inflow and outflow?

What is inflow and outflow?

hi,
for example u take stocks in the godown
what r material coming in to the godown is infow
what r the material going out is outflow
so total stock of the material can br found out based on inflow and outflow
this behavior is mainly seen in inventory management
There are two ways of implementing Non cumulative Key figure...inflow outflow is one way of doing that...mainly used in inventory scenario...take an example...you have issued stock and received stock data coming from R/3...in report you need current stock based on key date ( That may be current date ) so u cant directly subtract the two values and cumulate them because its Non cumulative KF and aggregated in different way.....
To implement this we create infoObject for current stock and check the third option in infoObject " Inflow Outflow" and there u will specify Inflow = received qty and Outflow = Issued qty so this infoObject will always contain difference of these two
current stock = received - issued
Also you initialize the current stock with some value initially

Similar Messages

  • Cash Inflows and Outflows- company code wise, project wise etc.

    Hi Gurus,
    Client's requirement says they need cash inflows and cash outflows related to a company code, project wise etc. for a specified period.
    What needs to be done for this requirement? Do we have to implement Cash Management and liquidity forecasting module to fulfill this requirement???
    Please revert asap.
    Thank You

    Hi
    You need to setup the cash journal configuration where cash inflows and outflows will be recorded.
    The path is as follows:
    SPRO>Financial Accounting>Bank Accounting>Business Transactions>Cash Journal
    Hope it will solve your problem.
    Regards
    Tapan

  • Non cumulative key figure is not getting filled based on inflow and outflow

    hi,
    i have a non cumulative key figure which is having inflow and outflow.
    i have these three info objects in dso.
    as i know non *** key figure is calculated based on inflow and outflow.
    i am getting values for inflow and outflow so non *** should be calculated based on this values.
    <b>but the collumn is blank in the dso</b>
    in that non *** keyfigure i have added two info objects in inflow and outflow.
    is there any other setting i nedd to do?
    please sugest me.
    its urgent

    Hi Venkat,
    Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
    For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
    Hope This Helps,
    Regards,
    rik

  • Any SAP report to capture Foreign currency Inflow and outflow

    Hi Guru
    Any report available which can provide Inflow and Outflow amount in a Company code in Foreign currency.
    Account recievable report+ Account Payable report
    I was thinking of using BSIK/BSAK and BSAD/BSID tables for this.
    Report shud have these columns
    For Each Vendor and Customer >>>>>>
    Opening Balance                This month Debit                  This month credit
    it is to  get closing balance..
    please advise.........if no standard report than any logic will also be welcomed.
    Edited by:
    Edited by: AJeet N on Sep 14, 2010 1:27 PM

    You can also try out the report HINUACRP.
    Regards,
    Santosh.

  • Non-cumulative Inflow and Outflow explanation

    Hello Everyone,
    We are just implementing Inventory reporting in BW and cannot understand query results.  We have searched the forums and documenation, but cannot find an answer.
    We have a Non-*** Key Figure that we have defined an Inflow and Outflow for (in the aggregation tab).  Can someone please explain in detail how this Non-*** will be calculated with Inflow and Outflow.
    The Non-*** has Aggregation of SUM and exception of LAST
    Here are our results (and the Inflow and Outflow KF's are ***)
    We have a test query showing the KF for Inflow, KF for Outflow and KF for the Non-*** value.
    The Inflow KF shows 26320
    The Outflow KF shows 12428
    The Non-*** KF (with the 2 above Inflow/Outflow) shows 66002
    We thought this Non-*** would be calculated as Inflow (minus) Outflow.  So the total of the Non-*** we were expecting 13892.
    How does this Non-*** work with Inflow/Outflow?  We can't find anything on this.
    Thanks so much,
    CM

    Hi CM,
    this has been discussed so many number of times in SDN.. and please search the forum on the same..
    Also for ur ref:
    non-cumulative key figures
    Inventory management: non-cumulatives VS. snapshots
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    http://help.sap.com/saphelp_nw70/helpdata/EN/7e/96cc373de44040e10000009b38f8cf/frameset.htm
    How to implent inventory cube 0IC_C03  with Transformation & DTPs
    Thanks
    Assign points if this helps

  • Can anyone explain me abt Cash inflow and outflow

    Hi all,
    Can anyone explain me the cummulative cash inflow and out flow available while creating an info object. with an example in realtime scenario.
    thanxs in advance
    hari

    Hi,
    Mainly inflow and outflow is using in inventory only. So take the inventory live scenario and understand the logic. Pay some passion to read the below doc. Coz it will explain the complete design of the inventory.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Regards,
    Vivek V

  • Inventory Inflow and outflow calculation

    Hi ,
    I am working with inventory cube my value for the Current stock ie.valuated stock is not getting tally with R/3 hence i would like to calculated that in the Query level and check..when i wrote formulae like this
    Current stock = value stock recieved - value stock issued
    but when we click on ok button we get the enhance button but in BI 7.0 we had some else setting becasue i am not getting this option to set the aggregation and exception aggregation please kindly can anyone will help..
    thanks

    Done

  • Non cumulative with inflow and out flow vales cant be seen in report

    Hello
    I have 0VALSTCKVAL Value of Valuated stock with inflow 0RECVS_VAL and Outflow 0ISSVS_VAL.
    The Data is loaded into 0IC_C03 cube From BX Extractor and when I create the BEx Report it shows me the value only for the 0VALSTCKVAL.
    I cannot see the value for inflow 0RECVS_VAL and Outflow 0ISSVS_VAL. What is the logic used behind this!
    How can we know the reference value?
    Informations please!
    Points will be assigned!!
    Thanks
    Ram

    Hello
    0ISSVS_VAL :   *12.236,39  *
    0RECVS_VAL : *23.155,20 *
    0VALSTCKVAL:  39.897,96 EUR
    I have the issued stock ,received stock and the valuated stock! The issued stock and the received stock is used as an inflow and outflow for valuated stock.
    Now how the values is calculated ?
    Thanks
    Ram!
    Points will be assigned!

  • Inflow and out flow

    i dont know whether i am right or wrong
    in info object
    ->under aggregation
    ->non cumulatine changes
    inflow-------
    outflow----
    for example take obalance
    inflow- credit
    outflow- debit
    so we get the output of  0balance
    is my example correct?
    please suggest me
    i will asssign points

    Hello
    0ISSVS_VAL :   *12.236,39  *
    0RECVS_VAL : *23.155,20 *
    0VALSTCKVAL:  39.897,96 EUR
    I have the issued stock ,received stock and the valuated stock! The issued stock and the received stock is used as an inflow and outflow for valuated stock.
    Now how the values is calculated ?
    Thanks
    Ram!
    Points will be assigned!

  • The ability to measure cash in and outflows based on the Profit Centers

    Hi,
    As you may be aware, we are currently undertaking a global project to split our Balance Sheet based on the divisional structure (Profit Centres in SAP).  The splitting of Receivables and Payables by Profit Centre. We have an additional requirement in the area of cash flow. What is required is the ability to measure cash in and outflows based on the profit centre that the movement relates to.
    Please help me on the above issue.
    Regards
    Srinivas

    Ok closing based on my research
    It is often not possible to set the size of a buffer so that it never becomes full. Above a certain size, which is greatly dependent on the hardware and the operating system, the performance advantage of the buffer is canceled out by increased operating system paging. A buffer that occupies too much main memory forces the operating system to perform expensive paging.

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

    Sorry didn't know that the first step was just supposed to be "subject".
    So here it is again.
    "I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that."  I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
    Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
    [email protected]

    Hi Sonia,
    While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
    You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    You can download CS4 from here:
    Download CS4 products

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!

Maybe you are looking for