What is infoobject technical name labor: mara-labor

Hi all
what is the infobject technical name of LABOR : MARA-LABOR
LABOR found in the transfer rule but it is not enable. how i am enable in the transfer rule
REGARDS
SANGRAM

check this out...
query problem field is not avable in the cube
assign points if useful ****
Thanks,
Raj

Similar Messages

Virtual infoobjects: technical name in source and target systems

Hello Everybody,
actually I got a problem: I´ve created a virtual characteristic which is working fine on development system.
However after transporting to target system the BADI implementation containing the virtual infoobject dumps:
assign component 'Z____723' of structure cs_data to .
Is there any other way to avoid using these technical names 'Z____723' and use e.g. 0customer instead?
I would have expected, that the technical name for the virtual characteristic in my case 'Z____723' for 0customer will be the same in dev as in prod.
Thank You!
Goliad001

In my case I need to copy a Production Client (say 900) to a Test Client on a test machine (say client 700), what I came to know was that this is basically a client copy, but since the size of data involved is to the tune of 500GB +, it is System Copy.
Client Copy and System Copy are two different method to transfer the data and process are toatally different.
>> Also if on the present test machine I am to keep the present client 700 and if the resources permit, create a new client (say 800) and copy client 900 to it, is it a System Copy.
No. It will be client copy which is not possible as your Source/Target system are on different Support Pack level.
Or if I copy the client 900 to the existing client 700, is this a System Refresh ???
No. It will again a Client copy. You have confused between System Copy and Client Copy. I would suggest to to read first what is the difference between these two and the process to do that.
Regards,
Subhash

Technical Names

Hi,
Could any one please let me know what are the technical names of the below objects in R/3 and the table name(s)where they can be found.
1>Main Customer
2>Business unit from Profit Center.
Thank You.
Regards.
Vaishu.

Hello VaisHu,
How r u ?
Go To SE11 and in Tables type in DD03T and then select Table Contents (CTRL + SHIFT + F10). Then give the DDTEXT you want to take and see the FIELD NAME and TABLE NAME.
Also, I have not seen these 2 Descriptions exactly in R/3.
Best Regards....
Sankar Kumar
+91 98403 47141

ODS technical names

Hi All,
can somebody help me with the technical name of the ODS
Active table = /bic/AA<ODS name>00
Change Log =??
New table=??
can somebody give what are the technical names for the above tables of the ODS and also correct me if i am right with Active table name.
Is change log table and the PSA table one and the same.
thanks and regards
sree

HI,
An ODS consist of these tables:
/BIC/A(odsname)00 Active records
/BIC/A(odsname)40 New records
/BIC/A(odsname)50 Rollback (for internal use only)
/BIC/BXXXXXXXX Changelog
You can also find that using ODS -> manage -> Content -> Change log table.
Check this for more info
http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81eef52c511d182c50000e829fbfe/frameset.htm
technically the changelog table of an ODS is a PSA-Table. you have to read all three tables sequentially to get to the PSA-Table name which is your changelog table name.
Assign Points if useful
Regards
Pavan Prakhya

Technical names of infoobjects in infosets

Hi,
I have create an Infoset through several ODS and cubes. System automatically generates technical names starting with F, at design screen for each infoobject in ODS or cubes. But i want to see and use original tech. names of objects especialy on the BEX design screen. F names are confusing me.
Is that possible ?
best regards,
Yigit

Technical names are assigned sequentialy.
You can enter in Infosets definition and push the button of technical names (the most right one)
In BEX i think is not possible.

Technical Name of Existing InfoObject

How can I change the technical name of an existing InfoObject? Thanks

I think this is not possible...you have to create another one as copy (but this will not allow you to replace the old with the new one in all the objects in which these objects are contained as providers, query and so on...)
Bye,
ROberto

Multiple Infoobject with same technical name

Hi All,
I have a very basic question which confuses me a lot.
I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area - ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
Sorry if i am too elaborate, I hope i have made my questions clear.

Hi,
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
A. same 0CUSTMER you can use the different places it holds same data.
source is the 0CUST_ATTR -> target is 0CUSTOMER.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
A. it will contain the same set of data.
it has the overwrite function.
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
Thanks,
Phani.

How to identify the technical names in infoobjects inInfoset

Hi,
I want to design the query based ob infoset(SAP BW). Infoobjects shown in the infoset have different technical names.
There are 4 infoobjects in query designer having same descriptions. How should I identify technical name of infoobjects and differentiate between them?
Regards,
Shital

Hello Sheetal,
Click on the Technical names button in query designer, it will be in between context menu and table display.
Regards,
Pavan.

Report output showing in technical names

Hi,
When I execute a query, input variables and report out put are shown up generally in InfoObject descriptions before. Just suddenly what happened don't know these reports are showing up output in Technical names, Input variables and the report as well. Where do you make this to set as default to display in InfoObjects descriptions input variables and the report as well instead of technical names. Kindly help, I appreciate your answers. Thanks
regards,
reddy
Edited by: chreddeppa on Oct 21, 2011 8:13 PM

Sometime it happens because of the lanugate setting of the browser.
If the browser is internet explorer, you can go to Tools > Internet Option > General > Language and if you are using English, it should be added there (and I guess as first language).
Try if it solves your issue.
Regards,
Gaurav

Trace routine if we know Technical Name of it?

Hi,
I had Transport request which has a routine included by means of its technical name!
But the objects i had included in the trasnport request definitely not a routine---
So how can i trace that routine where it was used?????
Raj

Routines are usually associated @ InfoObject, Transfer Rule & Update Rule levels. So if your transport is small, you can do a manual check at each of these places.
Alternatively this is what you can do.
- Try to recreate the transport in the "Transport Connection" in Workbench
- Pull in the necessary Objects that you have transported to your transport window. Now the objects that are collected can be displayed as Hierarchy(Default) or List. Choose List and it will display the routines. That way you can identify.
Regards
Anujit Ghosh

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

Technical names in Business Role selection screen

Hello,
When I log on to the WebUI I get the selection screen for the Business Roles (correct because I'm assigned to multiple).
But in the selection screen the Technical Names of the Business Role is hown too and I don't want to show these to the users.
So does anybody know how we can disable showing the technical names in the business role selection screen?
Can it be done in BSP crm_ui_start > Page Fragments > selectBusinessRole.htm Selection of Business Role? If so, what do i have to change?
Thnx!
Regards,
Joost

Hi Joost,
This technical information is the tooltip that is comming from the following line.
crm_ui_start > Page Fragments > selectBusinessRole.htm
at line no 29
tooltip="<%= profile_detail %>"
If you can remove this line then technical information, that comes up when you do mouse over the role description, wouldn't come.
Regards
Ajay

Display the technical name of the last level of the hierarchy

Hello,
I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
Please Advice,
David

David,
Check the below possibilities.
1. You can do that in a workbook.
2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

The technical name of object QVIW zabcd is not valid

Hello Gurus
I am facing a weird problem.
I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
Please help me asap
Our system is on SP18 both for abap and Java

Hi Bala Duwuri,
Thanks for the input...
Can you please give me your valuable inputs on this ........
I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
Right now am following the below link But in that no where they were talking about the webdynpro eventing.
then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
Thanks in Advance,
Dharani

Make appear technical name and name of a query in separates columns

Hello everybody,
I have a question about menus of the Bex explorer (but maybe it's related to any menus of SAP).
I would like to show the technical name of a query or a workbook in a single column, something like :
Technical name | Name of the query/workbook | Last modification
For now, I can only the technical name or the name (or both side by side) but I can't have three separated columns.
Is there any mean you know to do this ?
Regards,
Julien DERIOT

Thanks for your quick answer but it's not exactly what I'm looking for.
When I speak about the bex, I mean when you click on the icon to open a query/workbook, you see all of them inside a window.
Actually, I can see :
Name workbook | Last changed on
And I would like to see :
Technical name | Name workbook | Last changed on

What is infoobject technical name labor: mara-labor

Similar Messages

Maybe you are looking for