What is Internal IO and External IO?

What is Internal IO and External IO?

Hi SeshuGiri,
an Internal IO represents the data in your internal siebel structure with BO and BC's. If you are developing an integration workflow which exports siebel data into an xml file,
the external io describes the structure of your xml. This can be the same like your internal, but often you have to use the xml tags and structur of your external system. This can be specified
in your external IO. You just have to use the eai data maper to convert your internal io into your external io. I hope this helps you so far.
Cheers joschi1905

Similar Messages

  • Difference between Internal type and External type

    Hi,
    I was trying to load data to a DSO from a flat file.
    while loading data to the field type 0calmonth, input was in format yyyymm. And on activation of data, it would give me an error.
    I want to know what is the difference between the internal format and external format.
    Thanks and Regards,
    Radhika

    hi
    SAP Internal format : YYYYMMDD.
    If u load the date fields in this format,SAP changes this field into User reqired format as
    MMDDYYYY
    DDMMYYYY.
    DD.MM.YYYY
    DD/MM/YYYY
    These setting are user specific.
    Regards
    Satish.

  • Internal format and externa l format

    Hi friends ,
    I would like to know the concept of internal format and external format in B.I FLATFILE EXTRACTION?
    how we have to use those functionalities?
    Thanks in advance,
    kumar.

    Hi,
    In the SAP Help portal see the following link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/3ec9ea4ac011d1894e0000e829fbbd/content.htm
    Rgs
    Antonino

  • Difference between Internal HU and External HU

    Hi guys,
    I am quite new to WM, can you please tell me Difference between Internal HU and External HU

    The HU information is stored in table VEKP (header) and VEPO (item). In the header table you can find Internal HU No (VENUM). This is the internal SAP number automatically assigned as the table key each time you create an HU. However, the HU aslo has an external number (EXIDV) which is the number of the HU that is used when marking the HU. This number allows for a longer ID than the internal number if you want to use.
    Here is the documentation for EXIDV.
    Short Text
    External Handling Unit Identification
    Definition
    Specifies an external identifier for the handling unit.
    Use
    The system automatically generates an internal number that must be unique for each system client. The system also needs external identification so that it can uniquely identify handling units.
    1. Creating a handling unit:
    Identifiers for handling units are determined during creation according to settings in Customizing for number assignment of the packaging material type for the packaging material that is being used. You can also assign default values for identifiers when you create handling units, although these values must correspond to the settings in Customizing.
    2. Processing a handling unit
    To edit existing handling units, enter the handling unit's identification in this field.
    Rgds
    Richard

  • Internal (central) and external speakers (left,right)

    Hi all,
    I looking for a way to put the speakers in the iMac to good use.
    what I know:
    I can't use the headphone-jack and the internal speaker simultaneously,  since there is a hardware switch in the headphone-jack.
    what I don’t know:
    If I would use an usb-sound card, is there a way to use the internal speakers as a central speaker and the sound card for left and right channel?
    Perhaps somebody has an idea to this.
    Thanks
    Patrick

    I don't believe this is entirely true, it appears that while running Windows XP through Bootcamp, because of the absence of some kind of driver, both the internal speakers and the external speakers play the sound. Apparantly some guy was using Skype with his headphones, but the sound was not only coming through his headphone but also through the speakers.
    Long story short, there has to be a way to do it, even though it may be through some ugly firmware hack.

  • Differecne between internal mode and external mode

    Hi all,
           In Integration Builder you have Two Modes 1)Internal Mode and 2) External Mode.Does any one what is the difference between these two terms.Can you please send me the link where can i find the details of this Mode.
    Thanks,
    kiran.

    Hi
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/cd6a8bceed26469f3b0952a030c711/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d7/2f2c1f4b40424f8c6ddca5c3adc486/frameset.htm
    Thanks

  • Making the internal drive and external drive

    My G5 died last week and I got a new macbook pro. I just got an external closure for the internal hard drives. Can The same be done for the burner. I upgraded the burner last year and it is very nice. Please let me know if this is possible and what some good options would be.

    Hi-
    Yes, an optical drive can also be placed into an external housing like this one.
    Or, save money with a refurb model.

  • Differences between Internal Format and External Format

    Hi experts,
    When I was importing master data from InfoObject in BW, there's an option selection in the screen of Data Manager. Its name is Choose format and two selectable options are:
    1. Internal Format
    2. External Format
    I looked into help of BPC and it says:
    Choose the Format
    Note:
    The External Format calls the Output conversion routine of the InfoObject.
    The Internal Format does not call the Output conversion routine.
    I'm not sure what is Output conversion routine of the InfoObject. Could you help me to understand it?
    Thanks,
    Tony

    Hi Tony,
    In BPC Data Manager, you will find Conversions, in that you will find
    External and Internal formats.  This means if you are importing a flat file where in
    Example your date format in that file is 31-10-2009, but our Internal format (BPC format)
    will not accept it.  Our internal format is 2009.OCT.  So accordingly you have to
    mention that.  It may be for any dimension like Accounts, Product and so on.......
    I hope this may help you.
    Raghu B.S.

  • Is there a way to play music through the internal speakers and external speakers at the same time?

    I have iHome speakers and would like to listen to my music through them and the internal speakers of my Macbook pro at the same time.

    More information:
    https://discussions.apple.com/thread/2609977

  • Urgent: what are "virtual host" and "external alias" used for  on SICF?

    I wonder what is their functionality?
    Please help. Points guaranteed. Thanks!

    Payal:
    Your help is great!
    The link says:
    <b>1.2.5.6
    acmegate.acme.com
    <b>acmenet.acme.com</b>
    If more than one host name is assigned to one IP address, one host name is the default name, and the others are aliases. In the table, the default name is in bold type.</b>
    We want:
    1) for all incoming requests from the internet to the ITS use:
       acmegate.acme.com(i.e. the default name. The user will type http://acmegate.acme.com:####/xxxxxx);
    2) for all responses from the ITS to the internet use:
      acmenet.acme.com(i.e. the alias. The user will get
      http://acmenet.acme.com:####/xxxxx).
    If you could help with this, I really appreciate with 10 points.
    Best regards.

  • What is Internal and External format in data source

    Hi friends,
    can any body explain me about Internal format and External format
    while we creating datas0ource. on what basis we choose these.
    could any plz explain me.
    Thanks in advance,
    Thanks and Regards,
    Madhavi

    Hi Madhavi,
    In BW the Internal Format of data is different then external format (the one we use in general) for example date is stored in the format as "YYYYMMDD".
    Now if you are loading some data in BW where the Format is different than YYYYMMDD then you have to convert it using Conversion Routines.
    Please go to SE37 and put CONVER and you can find a  lot of conversion routines , alternatively you can go to infoobject and in General tab you can use F4 help dropdown for various conversion routines available in BW.
    Hope it Helps
    Thanks
    CK

  • Lync Implementation with different internal and external domain sync

    Hello Experts,
    Having Windows 2012r2 with Lync 2013 frontend and Edge 2012 server on Win2012. Internal domain name is test.local and Internet domain name is : tgroup.com. Internally all the clients are able to sync with frontend
    server using [email protected] or [email protected] Internal CA and External Digicert works fine. But only problem is with external clients who want to communicate through edge server. 
    Edge server has 3 LAN ip address (nat with public IP), 10.10.10.2, 10.10.10.3, 10.10.10.4 and another Internal network interface which has ip 10.10.20.3
    which uses that to communicate with front-end. 
    How to achieve this ?  We dont have reverse proxy configured and we have only two servers. 
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    The reverse proxy is used to publish URL's like the meet and dialin url, the address book url and the lync mobile client (smart phones and tablets) urls. This doesn't impact the external desktop user access as thats via the edge server. There is more to
    it than that but for the sake of keeping this simple lets stick to that for now.
    As far as SIP domains go. Think of your Lync users as having a SIP address similar to email addresses. You wouldn't have a user with an internal email address but with a different external email address. In fact best practice is to have the Lync SIP address
    match the email address.
    My reccomendation is to use the ttgoup.com as a sip domain and not the test.local
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • How to validate when date format is diff Internally and externally

    Hello,
    How can I validate the Date format if Internal format and external format is different.
    Ex :
    *  SELECT SINGLE CRTSP
    **                FROM /SAPSLL/PR
    **                INTO L_CRTSP
    **                WHERE CRTSP IN S_CRTSP .
    CRTSP (YYYY/DD/MM HHMMSEC) Internal Format
    S_CRTSP (YYYY/DD/MM) External format - selection option
    I had done following to convert the internal format to external format.
    DATA : LV_DT TYPE STRING.
    DATA :  L_CRTSP TYPE /SAPSLL/CRTSP.
    SELECT SINGLE CRTSP
                    FROM /SAPSLL/PR
                    INTO L_CRTSP.
    MOVE : L_CRTSP TO LV_DT. "(YYYY/DD/MM HHMMSEC)
    L_LEN = STRLEN( LV_DT ).
    L_DATE = LV_DT+0(8).
    I have the date format that i need in L_DATE."  (YYYY/DD/MM)
    Now how should I validate?
    *  SELECT SINGLE CRTSP
    **                FROM /SAPSLL/PR
    **                INTO L_CRTSP
    **                WHERE CRTSP IN S_CRTSP .
    Please let me know how can I validate or how can I write the select query to validate this field.
    There should be some way using Wildcard or some function module...which I am not sure...
    Any suggestions will be appreciated!
    Regards,
    Kittu
    Edited by: Kittu on Jan 6, 2009 12:58 PM

    Hello,
    Thank you for youe response and I apprecaite the help so far.
    This logic work if it is Parameter...When I have select option it is not working as it is not taking the range values...
    SELECT GUID_PR "Primary Key as GUID in "RAW" Format
    CRTSP "PRODUCT CREATED ON
    CHTSP "PRODUCT CHANGED ON
    FROM /SAPSLL/PR
    INTO TABLE T_PR.
    DATA : T_PR1 TYPE TY_PR OCCURS 0 WITH HEADER LINE.
    DATA:  W_TEST    TYPE STRING,
           W_LV_LEN  TYPE I,
           W_LV_LEN1 TYPE I,
           W_LV_DATE(20)  TYPE C,
           W_LV_DATE1(20) TYPE C.
    DATA : W_V(8) TYPE C,
           S_CT(11) TYPE C.
    SORT T_PR BY CRTSP CHTSP.
    LOOP AT T_PR INTO WA_PR.
      W_TEST = WA_PR-CRTSP.
      W_LV_LEN = STRLEN( W_TEST ).
      W_LV_DATE = W_TEST+0(8).
    ** IF WE SELECT ONLY ONE DATE IN SELECT OPTION
    s_crtsp VALUE IS - IEQ20040101..bY REMOVING FIRST THRID DIGITS
    WE ARE GETTING THE S_CRTSP VALUE IS 20040101 AND THIS LOGIC IS WORKING FINE..
       MOVE S_CRTSP TO S_CT.
      W_LV_LEN1 = STRLEN( S_CT ).
      W_LV_DATE1 = S_CT+3(8).
    *  IF W_LV_DATE NE S_CRTSP
    IF W_LV_DATE NE W_LV_DATE1.
      W_FLG = 'X'.
        DELETE T_PR INDEX SY-TABIX.
      ENDIF.
      CLEAR W_FLG.
    ENDLOOP.
    Can we do anything for this...
    ANy suggestions would be apprecaited!
    Regards,
    Kittu

  • Internal and External Portals be hosted & Configured on Same Portal server?

    Hi Experts,
    Is it possible to host and configure the Internal portal and External Portal on the same portal server?
    If yes, kindly provide the inputs.
    We have a scenario wherein we have to use the same portal server for both kinds of users (Internal as well as External).
    We want to provide separate URLs for both the portals and the datasource for the users management would be different for both the scenarios.
    The user managemnet in case of Internal Portal has to be authenticated to an AD server whereas in case of External Portal the user management would be taken care by UME.
    Please suggest and share some docs if possible.
    Thanks & Regards,
    Anurag

    Hi,
    Can we customise the Portal logon page for both the portals differently?
    I've already customised the portal logon page by modifying the UME properties in the Config Tool but that was done keeping in mind the External Portal users. Now, we want to customise the page for Intranet users but with different options at the logon page.
    How can we achieve this functionality as any property that we modify in either VA or Config Tool will affect both types of portal pages.
    For an eg. we have a Self Registration link for the external users which we do not want for the Intranet users. How is this possible?
    If we design a webdynpro java application for the logon page and for authentication purpose, can we call a home page iview on successful authentication?
    And with this customised webdynpro java application, can we connect to the AD server for the user authentication?
    Best Regards,
    Anurag

  • Unable to match internal and external assignemnt of barcodes in OAM1

    I have done the barcode creation using FB03 inernal assignment and then using the function call BAPI_BARCODE_SENDLIST, I have added the required paramters including Doc ID.
    To generate Doc ID, I have done document assignment through OAAD and attached the tif image.
    Still I was unable to match the Internal(BDS_BAR_IN) and external (BDS_BAR_EX), assigned ones in OAM1 trasaction code, and which ever barcodes have been created they are becoming as new entries from both sides.
    Can any one help me on this?
    Thanks
    Aj

    Hi,
    Finally it's resolved...Following is the solution thought to share in the forum:
    The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
    to SERVRESP.
    To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
    shown below:
    sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
    After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
    It's resolved after doing this..

Maybe you are looking for

  • Automator plug-in added to read-only calendar in iCal

    I was trying the 'Tiger Tip of the Week' about creating an Automator workflow saved as an iCal Alarm plug-in. Unfortunately, it added it to the 'Holidays' calendar, which is read-only. I found where the plug-in was saved in my library and deleted it,

  • Outbound delivery creation in case of stock transfer scheduling agreement.

    Dear All, We are creating the Scheduling Agreement for the stock transfer between the 2 plants . and for the stock transfer we are following the outbound delivery route (641 movement type) Issue is as below:- suppose in the scheduling Agreement I hav

  • IPad 2 Podcasts show in iTunes, but not playable in iPad

    Podcasts update regularly in iTunes, like they should.  I plug in the iPad to the computer, it syncs, like it should.  In iTunes I can see the podcasts on my iPad.  Go to the iPad (music->podcasts) and there are icons for each podcast, but they won't

  • No JAX-RPC Context Information Available

    Hello I am new to java and webservice. I am using jdk1.4.2 and jwsdp1.2 and tomcat 4.1.27 I have problems in running ant so i manually ran wscompile, wsdeploy to create and deploy a war file. when i put the war file in the webapps directory of tomcat

  • Animated Flash Component Scaling when used as Button Skin

    I am trying to skin the overSkin of a Flex Button component with an animated Flash .swc component. (Actually, an Accordion Header, but for all practical purposes the same.) All works completely fine, in most cases.  The problem I run into is when I h