What is "Internal Muxer Error" - How to fix it???
I'm trying to burn a simple/basic project: 5 short films (one 15min, the others under 4min) that I put into a template - and I have no additional menus save the first. I have no transistions or anything else complicated. Just the menu and the movies.
Here's the backstory: I had built this same project before, successfully burned at least 10 DVD's of it, and then moved it from my hard drive to my external hard drive. When I went back later to burn some more, I re-connected the assets with the project and tried to burn again - only to get this "Internal Muxer Error" that stops the building/formatting. I went through all the preferences and all other options - I retraced my steps as best I could, to no avail. So I resorted to moving my assets back onto my hard drive and I re-created my project from scratch.
And I'm still getting this "Internal Muxer Error" in the "build" stage of the burn process - even though I did the same things to this new project that I had done when I first started.
What is this error and how can it be fixed? I noticed a thread about the error below, but I didn't understand a thing in that discussion. And my project is different from that one because I am not using multiple angles or anything spiffy. I think I'm making about the most basic project you can come up with.
Any help/suggestions are greatly appreciated. Thank you so much in advance.
Building Project Short Films
9/7/05 11:32:18 PM
Build Folder /Users/danielbell/Desktop/Short Films 2003-2005
Starting DVD Build SHORT_FILMS...
Compiler Initializing...
Precompiling Project SHORT_FILMS
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM4
Created 5 PGCs in VTSM5
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
Compiling Menu PGCs...
Writing VTS040.VOB
Compiling Menu PGCs...
Writing VTS050.VOB
5 VTSs and 5 Titles will be created...
Compiling VTS#1 (Outlook)...
Muxing VTS011.VOB
Internal Muxer Error
Build cancelled
thanks!
Similar Messages
-
Internal Muxing Error - How I Fixed Mine - FYI
FYI: I received the "internal muxing error" message during a build. I thought I'd post what happened, what I found and how I mixed mine in case it helps someone else.
I was building a project using a "project template" that I've used many many times in the past. (I just drop a new menu and new assets into an old project thats been saved without any assets). The project consisted of a menu connected to 4 tracks. Each track contains a 30 min film.
About 70% of the way through I received the "internal muxing error" and the build stopped. This was when muxing Part 3. This happened each time I re-tried the build.
To cut a long story short:
I checked the built project which was 3/4 complete. I had a look at the build log and it indicated which VOB was the last and thus which one had the problem. Oddly enough a VOB for the next track had been created.
In each track I placed 1 second of black, (a special mpeg2 and ac3 assst), at the start of the track,followed by the main asset, followed by 1 second of black again. The always worked and looked good on playback.
I traced the probelm, through some trail and error to the 1 second of black at the end of track 3. eg; removing it resulted in a clean build, putting it back resulted in the build failing.
I wanted to keep the 1 second of black at the end of the track, so I ended up trimming the video asset just enough so that it was about 1/2 second shorter than the audio asset, and adding back the 1 second of black at the end of the track.
Oddly enough, this build worked. I burnt the dvd and it was fine. Everything worked.
I really don't understand what causes the "internal muxing error" message. (I've printed some other posts and will read through them in detail when I get the chance). And I really don't understand how what I did fixed it. And as I've used this "project template" dozens of times in the past I don't understand why it suddenly failed, besides new assets everything was the same, and even the new assets were "standard", nothing new about them.
So there it is. Weird.Jay, thanks for the summary.
-
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
my iphone5s is dead...plugged it into computer to charge, and it says "internal device error" how can i fix....i already tried plugging it into all other ports
tried another computer?
if it works there then your itunes install have gotten defect -
A unique Internal Muxer Error problem
I'm using DVD Studio Pro 4.1.1
I've searched through threads and have found that people have gotten this message, but never under the circumstances which I got it at.
I have a stand alone DVD recorder that records DVD-RAM discs. I was hoping to record my favorite TV show and then rip it to my computer so that I could:
1. Cut out the commercials without having to sit and watch it, I could just cut out the commercials using MPEG Streamclip
2. Get more on video on my DVD
So, I ripped the MPEG2 from the DVD. It was recorded in XP mode, which fits 1 hour. Since the show is 30 minutes, I figured I could fit 3 episodes on a disc (I'm very picky about video quality) because without commercials they'd be about 20 minutes each.
I used Toast Titanium 8 to rip the video from the DVD-RAM disc, and it rips it as a mpeg2. Now, I know DVD Studio Pro 4 cannot handle MPEG2 video that is already muxed, so I demuxed the video and the audio. I pull them into DVD Studio Pro without any issue and got everything set. I just have a basic menu, no chapter markers for each title, nothing. The total file size is a little larger than allowed, but that's okay cause I can just compress it when burning it with Toast, that way the disc is 4.36gb at the highest bitrate possible.
When I go to build though I get the dreaded Internal Muxer Error.
The video is encoded at 8.9mbps, and the audio is AC3 192kbps.
Now, I would just use Toast to make the DVD but Toast keeps wanting to re-encode it because I don't think it will burn anything about 8mbps.
Heres the info of the m2v file from Quicktime:
MPEG2 Video, 640 x 480
FPS: 29.94
8.94 mbits/sec
Could the FPS be the issue? I mean, the DVD RAM disc plays fine on my DVD Recorder.
Does anyone have any suggestions? If it's encoded at too high of a quality, is there a way to lower the bitrate slightly? I've worked in video for a while but have never had to take a mpeg2 video file and re-encode it, usually any re-encoding I'd do with DVD2Xone or Toast Titanium, using their disc image compressing. When re-encoding the mpeg2 itself with Toast the quality was bad and it was filled with interlace looking lines, except bigger.
Any help would be greatly appreciated!Hi Adam
Sorry to tell you this (especially after all the hard work you put in explaining it) but this forum is used as a legitimate arena for users of DVDSP to post questions.
It may not seem like much to you but what your doing is illegal and someone (maybe me :)) will be losing money on something they put much work into - really.
I would suggest posting somewhere else.
Eric -
I have completed many copies of my DVD and have finally corrected all the errors that I can find and now when I go to Build in DVD Studio Pro in will not finish. It gives me an Internal Muxer Error. I thought this was just the audio, so I eliminated all the audio and it still does it. The main changes I have made are corrections in spelling. This is about 2 hours long, but is made of 16 separate timelines all put on one track. Does anyone know what is happening?
You should be able to hear the AC3 file
Can you hear the aif file play in Quicktime Player or iTunes?
Also double check the AC3 settings - A data rate of 160 or 192 is usually good, you should set Dialog Normalization to -31, preprocessing to none
Take a look about halfway down the following page for the settings (those above and some others)
http://dvdstepbystep.com/fasttrackover.php
Double check to make sure the audio is in the right track (it can happeen) and
make sure you did not place the audio in an audio track that you somehow disabled
I had this happeen recently on some AC3 files thaat I used in a DVD SP 3 project - no sound but it worked in DVD SP 4.
Did you do the troubleshoot - repair permissions, delete prefs, etc.? -
I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune
If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks
Hello there, Kyle.Kuz.
The following Knowledge Base article that provides some helpful pointers to help resolve your issue is:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?
AIR give you classes to detect an on-line or off-line status, it's in
this way for the sake of flexibility for instance what happens if you
only what to sync data only on Saturdays at 2 am? If it were done
automatically that'll be a problem. And it isn't so complicated.
You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
it's an application that does everything you have in mind.
I don't understand your question abou file types.
An AIR app can communicate with almost every backend served tech
CF, .Net, PHP, RoR.
Sincerely,
Michael
El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
>
I have to say that I'm loving the picture! well cool!
>
Sorry but I don't quiet understand. I thought AIR did the updating
automatically? I didn't realise the developer had to program the
logic of how the updates take place? Is it a case in most AIR apps
that when online the app updates the server and once every intervel
(of however long) the local SQLite DB is synced to the more updated
server DB. Then when offline the developer has to sense that the app
is offline and store a log manually of the updates without any help
from AIR itself, and then update once it comes online again?
>
Can AIR link to anything more than a database on the server side
apart from webservices, for example .as files or any other file types?
>
What type of server is a Flex app stored on, is it a specific Adobe
server rather than a Java or .NET server?
>
Thank you so much for your last comment!
IrishAIRMax
> -
The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?
Take it to an Apple Store or other service provider for testing.
-
When converting a .pptx file of 6MB to .pdf, the file size ballooned to 25MB. The original file was created on a PC. What happened? Why? How to fix? Thx.
gssharpe wrote:
What happened?
Nothing much. Different formats.
How to fix?
Try editing the original file. Resample pics to a lower resolution, check out other graphics, check table borders (eliminate any dotted lines or borders), check font usage. When generating PDF, try Save As (instead of Print > Save As), although I don't expect that'll make much difference.
Next, open the PDF in Preview, choose File > Save As, choose Format: PDF, Quartz Filterz: Reduce File Size. If that isn't enough, you can use ColorSync Utility to duplicate the Reduce File Size filter, and then edit it for a more aggressive size reduction. But keep in mind that size reduction means lower quality. -
The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?
If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad. -
Checkdb found 6 allocation errors , how to fix ?
HI Experts,
checkdb found 6 allocation errors, how to fix ?
Thanks in Advance!
VijayCauses
file system corruption,
underlying hardware system issues,
driver issues,
corrupted pages in memory,
problems with the SQL Server Engine.
Possible solutions
1.best solution if CHECKDB reports consistency errors is to restore from a known good backup.
2. If you cannot restore from a backup, then CHECKDB provides a feature to repair errors.
3. If system level problems such as the file system or hardware may be causing these problems, it is recommended you correct these first before restoring or running repair. 4. Allocation error in Index page, please recreate the index.
Thanks - Vanchan.Please MARK AS ANSWER, if my answer is useful to U.
Maybe you are looking for
-
Is it possible to have many users share the same account folder in HD Users?
Hi! New guy here. I'm trying to set up somekind of Schedule for me to be able to use my mac only in the morning and only in the evening. Parental control seems to be able to allow me to do that if i set up two different accounts and assign time limit
-
What is the best way to merge a file content into log file
What is the best way to merge a file content into log file. In worst case, I will read the file line by line as string, then use logger.info(lineString)to output to log file. However, is there better way to do this? The eventual log file will be some
-
Hi all i am new to abap I have the following requirement. kindly help me how to write the select queries to achieve it. its urgent pls help me thanks in advance In June of year 1, new budget prices must be determined for the following year (year 2).
-
Is it normal for laptop HD to be always busy (L745-S4210)???
I'm experiencing choppy video issue on our 2 months old L745-S4210 laptop, which cannot be resolved even with recovery method. One thing I have noticed is HD seems always busy, which could potentially cause choppy video. Can someone check your laptop
-
Hi, Any one can point to SolMan 7.1 sizing tool kit ? so far have seen 7.0 ehp1 sizing tool kit, but not for 7.1 yet.