What is iOS and how do I know if I have it ?

Whar is iOS and how do I know if I have it ?

Go to Settings > General > About
There you will find out, which version of the system IOS your device is currently running.
In addition to Niel's answer - applications developed for IOS will not be able to run on a Mac, because a Mac uses a differnet type of operating system "MacOS", and MAc applications will not be able to run on IOS based devices.

Similar Messages

  • IPhoto requires iOS. How do I know if I have iOS on my iPhone4 or how do I get it?

    iPhoto requires iOS? How do I know if I have it on my iPone4 or how do I get it?

    iPhoto requires iOS 5.1
    This version of iOS was just relaxed this past week. So before trying to purchase iPhoto you must first update your operating system on your iPad or iPhone to iOS 5.1
    Go to Settings > General > Software Update on your device to see which version of the iOS you are running on your device. If it is 5.0 or 5.0.1 you'll need to update. You should be able to do that directly from your device. But the update servers have been very busy this week so be patient and keep looking.
    If your iOS is a version 4 something you will need to connect your device to your computer and run iTunes to complete the update to 5.1
    After you have updated your iOS to 5.1 visit the App Store using your iPad and purchase iPhoto.
    Also keep in mind that iPhoto for iOS will not run on the original iPad as that iPad does not have sufficient ram for iPhoto to run.

  • Every so often when using safari my bookmarks disappear and then later the list shows up again.  Does anyone know what causes this and how to fix it?

    Every once in awhile while using safari my bookmarks list disappears.  Later it just shows up again.  Anyone know what causes this and how to fix it?

    I have had exactly the same problem now with two mini iPads.  Everything was tried; 1) restarting; 2) restoring factory settings etc.  NONE worked.  Eventually Apple agreed to replace it.  I have had the replacement now for two to three months and exactly the same thing is happening again. So off to Apple tomorrow to get another replacement.
    I am quite a heavy user of the iPad so wonder if this is something to do with the fault.
    It is so frustrating as sometimes reset works, and then after 10/20/30/40 minutes (you pick) it goes unstable again.

  • 301 unable to load plugin"controls" url'flowplayer.controls-32.13.swf What is this and how to reapair this?

    301 unable to load plugin"controls" url'flowplayer.controls-32.13.swf What is this and how to reapair this?
    I have no idea what to do.

    Probably because "latin-9" doesn't exist?
    # nano /usr/share/X11/xkb/symbols/fr
    xkb_symbols "latin9" {
    include "latin"
    include "nbsp(level3)"
    name[Group1]="French (legacy, alternative)";
    key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
    key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
    key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
    Try it without the dash (without the "-").
    And don't forget to mark it as solved (by editing the first post).

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

    I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

    iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
    iOS: Supported Bluetooth profiles
    Basically it support headphones, keyboards, speakers, peer-to-peer gaming

  • Safari and calendar won't open due to 'calendar persistence plug in' problem.  Anyone know what this means and how to resolve it please?

    Safari and calendar won't open due to 'calendar persistence plug- in problems'.  Does anyone know what this means and how to resolve it please?
    mac book pro with Mavericks 10.9.5

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I bought iphone 3G with ios 4.2.1 -however I couldn't install viber, Skype--it say that it needs update to ios 4.3 what it means and  how can I mange to install such program?

    could you some one help me? I bought iphone 3G with opration system ios 4.2.1 ..however i couldn't install viber, skype and othe software , ...it say that need update to iso 4.3 .what it means and how can I manged to install such program in my iphone?

    iOS 4.2.1 is the latest version available for the iPhone 3G, if apps require iOS higher than that then unfortunately you will not be able to install it.

  • My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    This has happend to my ipod once...
    did u keep it somewhere so tightly pressed??
    that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

  • Hi. My Ipad2 is being reseted each 1 minut of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks. iPad 2

    Hi. My Ipad2 is being reseted each 1 minute of use and then I found this description "resetcounter(date and time).plist". Someone knows what this means and how to avoid this? Many, many thanks.
    iPad 2

    Try resetting your device by holding down both the home and lock buttons for ~10 seconds or until the device restarts, ignoring the power slider. 

  • I have a 21" iMac that only boots as far as a folder icon with a question mark in it.  Anyone know what this means and how to fix it?

    I have a 21" iMac that only boots as far as a folder icon with a question mark in it.  Anyone know what this means and how to fix it?

    It usually means your OS has corrupted files. You need to reinstall OS X.
    If you are using Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If you are using Lion:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.

  • In Finder something called 'vuuno' has suddenly appeared under Shared. I didn't knowingly connect and want to remove. Worried I've been hacked or something. What is this and how to remove permanently?

    In Finder something called 'vuuno' has suddenly appeared under Shared. I didn't knowingly connect and want to remove. Worried I've been hacked or something. What is this and how to remove permanently?

    If you are using an unsecured or shared wireless network, then it could be just another user's computer name. If your sharing settings are correct, you have no worry. However, It would appear that at least some of the other user's settings are less than optimal inasmuch as his/hers is openly being displayed.
    The next time you check into a hotel and use their wireless network, you are likely to see a number of other user's computers. Some just the name, as they share no files. While others are wide open, and their file sharing is on.

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it

    I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it?

    Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.

  • I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

    I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

    Please refer:
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
    Regards,
    Ashutosh

Maybe you are looking for

  • 24'' iMac 2006 graphic problems

    I have an old iMac which I am planning to give away for free. It is a 2006 24 '' iMac with 2,16 GHz IntelCore duo processor. It had originally 1 GB RAM, but has now 4 GB RAM installed . The latest OS it had was iOS 10.7 Lion, and there were some grap

  • SRM 5 can approver view a SC?

    Hi Guys, I am wondering if you could help me. I am quite new with SRM. In SRM 5, from the Option "verify status" is there any way a user who is taking part of the approval workflow (and he is not either the recipient or the purchaser) of a SC, can he

  • Notification forward issue

    Hi all, we have some approvers, suppose(a,b,c,d,e) now if 'a' sends the approval mail to 'b' for approval where 'b' approves and it reaches 'c' where he approves and approval chain ends. Ideally the approval chain needs to end at 'c'. But , in our ca

  • Fragmented tables

    Hi, We are using following query to check fragmented tables. Is it correct? Oracle 10.2.0.4 (64bit) and OS AIX 6.1 (64bit). select owner,table_name,blocks,num_rows,avg_row_len,round(((blocks*16/1024)),2)||'MB' "TOTAL_SIZE", round((num_rows*avg_row_le

  • Sun java messaging server sundomain

    Please help me i want to create sun java messaging server sundomain Regards kkdas