What is ip address for officejet 4500

Can you please tell me what the IP address is for officejet 4500n

The IP address is issued by your router, so will be different for different printers. Print a Wireless Network Test from the front of the printer to see your printer's IP.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Firmware upgrade for Officejet 4500 G510n-z

Please. i need the firmware upgrade for Officejet 4500 G510n-z or at the original firmware. my machine is acting uncommon. The paper feeder process start and page stop in the middle.
thanks for all your help.
Regards;
Carlos Peguero

Yes, there should have been either a firmware update/patch, or a full recall on this device.
The software setup and configuration is bad enough for one humble computer, but when used as
intended with multiple devices it's an absolute headache.
I am constantly having to unplug the printer because the machine has decided it needs to rest for a bit. Okay,
everybody deserves a break now and then. But it goes into coma mode and I could be jesus himself and the power
or any other button) still would not wake it.
I would get into the rest but I'm not getting a helpful vibe from the forum; it's more defensive of a product which, apparently just under 5000 people have come by to check on. My friend at Microsoft talked to an HP engineer, who
laughed and gave us the fix.
Uploading to FedEx-Kinko's is the better option.

What is the address for Canon service center in Irvine?

I like to bring my Canon 40D in fir service what is the address for Irvine sevice center?

This is where I mailed gear for service. I'm assuming it is the same address for walk-ins
15955 Alton Parkway
Irvine, CA 92618

Windows 8 will not download disc for officejet 4500

My Officejet 4500 all in one cd will not download on a Windows 8 upgrade. Windows 8 sees the printer but not the scanner. HP web site support drivers do not make the scanner work either. What else can I do to make it detect the scanner?

Hi,
What is the model of your HP Officejet 4500, must be G510* where * can be from a to z.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 8.1 Will not Allow me to Install the Drivers for Officejet 4500 Series

Hi....I just purchased my new Laptop running Windows OS 8.1. I tried to install the Software for my
HP Officejet J4500 Series and the install process Stops with this MESSAGE:
"HP Officejet 4500 Series. The Operating System on this Computer is not Supported. The installation
cannot continue until this is resolved
Supported: Windows 2000 Windows-XP 64 bit"
I love my Officejet J4500 it has never failed me. I purchased this printer 3 years ago from Best Buy.Is their a New Software Drives that I can Download so that my J4500 will operate with my Win-8.1 OS ??
What suggestions do you have for this problem... Thank you for your Help with this....Rginarizona

Hi,
Try
HP Printer wizard
http://ftp.hp.com/pub/printers/hppiw/hppiw.exe?jumpid=ex_r4155/hho/ipg/ccdoc/piw/
Download and Run the HP Windows 8 Printer Install Wizard
Regards

Wireless connection for officejet 4500

I just replaced my router and now I'm having problems reconnecting my officejet 4500.

Well on this printer you go into the front panel setup which you would hit the setup rench symbol to the right of the machine than find network and then under network setting you will see wireless setup wizard when you select that option then to put in the passphase you do it like texting you keep pushing the number until it turn into a letter or number for you so it like texting when you put in the passphase. Now the passphase was setup when you got the new router so if you don't remember it contact the router company or it may be on the router and you put in the front panel like texting. I attached a document on how to reconnect to the network. Maybe this step by step process will help you out on resolvinfg the issue your having.
Thank you for being a Valued Hp Customer
Step one: Prepare for installation
Make sure that you have the following requirements before you begin:
Network name: The network name is the SSID (Service Set Identifier).
WEP key or WPA security passphrase
A computer that is connected to the wireless network.
Internet access. HP recommends broadband Internet access such as cable or DSL.
Your wireless-capable HP product. Place it close to the computer during the installation procedure.
Administrator privileges or password (Vista)
Make sure the product, access point, and computer are all on, and that the computer is connecting to the wireless network.
Exit all applications running on your computer.
Disconnect any USB or Ethernet cable that is connected to the product.
If you previously installed the software for a USB connection and now want to change to a wireless network connection, follow these instructions to remove the USB installation before continuing.
Go to the Printers folder:
Windows XP: Click Start , and then click Printers and Faxes .
Right-click the icon for HP product, and click Delete to remove it.
Step two: Connect to the wireless network
The following video demonstrates how to set up a wireless connection between your product and a wireless network. The product shown in the video is the HP Officejet J4680. The outside of the product might look different, but the steps are similar for your product.
Setting up a wireless connection using the contol panel
Follow these steps to connect the product to your wireless WLAN 802.11 network.
Press the Setup button ( ) on the product control panel.
Press the Arrow buttons ( ) to highlight Wireless Menu , and then press OK .
Press the Arrow buttons ( ) to highlight Setup Wizard , and then press OK .
The Wireless Setup Wizard searches for networks, and then displays them in a list.
Press the Arrow buttons ( ) to highlight the network name (SSID) that you gathered in the previous step, and then press OK .
If prompted, enter the WPA or WEP key:
Use the alphanumeric keypad on the product control panel to enter the passphrase.
When you finish entering the passphrase, press OK .
Make sure the product successfully connects to the network before continuing to the next step.
Step three: Decide whether to install with the product CD or download the software
Don’t worry if you don’t have the product CD! You can download the most current software available for your product from the HP Web site at no cost. The following information might help you decide which installation method to use:
Step four: Install the product software
To install the product on the wireless network, follow the steps for the method that you want to use (CD or download). Repeat the steps to install the software on each computer that will use the product wirelessly over the same network.
IMPORTANT : If you get any firewall messages during installation, click unblock , accept , continue , yes , allow , or permit , or the installation will fail.
Method one: Install the software with the product CD
Insert the product CD into the CD drive of the computer, and then wait a few seconds for the software installer to start.
If the installer does not start automatically, follow these steps to start it:
Windows XP: Click Start , click My Computer , and then double-click the CD drive.
Follow the on-screen instructions to start the installation.
NOTE: If you previously installed the software and are changing the connection type from USB to wireless, click Add a device when the Uninstall the software or Add a device window opens.
If prompted to choose the type of installation, review the following information
The Recommended type of installation allows you to take advantage of all your product features.
When prompted to choose a connection type, select the Network type, not the USB type.
Follow the on-screen instructions to finish installing the software.
Method two: Download and install the software from the HP Web site
Follow these steps to download the software, and then install it.
Step one: Download the software
Many products have more than one driver option on the downloads page. Choices might include a Basic type, and Full Feature type. If both options are available, the following information might help you decide which driver to download.
Follow these steps to download the product software and save it to your computer.
Open a new window to browse to the Select Software and Drivers page:
Right-click this link, Select Software and Drivers , and then click Open in New Window .
If prompted, type your product number. You might also need to click it in a list of similar products.
Click your operating system.
The Select Software and Drivers page opens.
Click the driver that you want to download. If you need help deciding, see the information in the previous table.
Click Download only . This option allows you to install the software at any time after the download completes.
Click Save , and then browse to the location on your computer where you want to save the file.
Click Save . The software downloads to your computer.
Tip: Make a note of the place that you saved the file, in case you want to install it at a later time.
Step two: Install the software
Follow these steps to install the downloaded software.
When the download is complete and you are ready to install the files, click Open Folder , and then double-click the downloaded file. The file name ends in .exe .
NOTE: If you closed the Download Complete screen, browse to the folder where you saved the .exe file, and then double-click it.
You can accept the default location to save the files. Click Next , and then wait while the installer extracts the files to prepare for installation.
Follow the on-screen instructions to start the installation.
NOTE: If you previously installed the software and are changing the connection type from USB to wireless, click Add a device when the Uninstall the software or Add a device window opens.
If you downloaded a Full Feature driver, the installer might prompt you to select the type of installation you want. (Skip this step if you downloaded a basic driver.)
The following information might help you decide which installation type to use.
The Recommended type of installation allows you to take advantage of all your product features.
When prompted to choose a connection type, select the Network type, not the USB type.
Follow the on-screen instructions to finish installing the software.
Additional Information
You can print a page of product information from the control panel of your All-in-One. The page includes information about the product IP address, MAC address, and network status. Follow these steps to print the information:
Press the Setup button ( ) on the product control panel.
Press the Arrow buttons ( ) to select Print Report , and then press OK .
Press the Arrow buttons ( ) to select Network Config , and then press OK . The Network Configuration Page pr

"File Corrupt" error when opening Driver software for OfficeJet 4500 G510n-z

I'm trying to reinstall the software for my OfficeJet 4500 G510n-z printer and I have downloaded the drivers from the HP support site multiple times. Each time I try to open the file I get an error of "File is Corrupt" and it stops opening. I was able to eventually install the printer but not the HP Solution Software.
I am running 64-bit Windows 7.
As you can see below, I have the printer installed but not the Solution Center. How can I add the Solution Center?

What Anti virus software are you running?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Trying to find Windows 7 driver / software for OfficeJet 4500 (CB867A) connected using Wired Network

Hello,
I am trying to use my Son-in-Law's HP OfficeJet 4500 CB867A (G510G). I am able to SUCCESSFULLY:
Communicate using a browser with the printer (e.g. http:\\192.168.10.139)
Print from my Samsung Galaxy S3 32GB phone using the HP Android software. If finds the printer just find and prints just fine.
Thus the printer looks to be connected successfully to the network. (Wouldn't you agree?)
The problem is installing the printer on our various Windows 7 Ultimate x64 systems. Right now I've only been trying my workstation (Dell T7500). When I follow the directions what comes down is the basic driver and software. The basic driver and software ONLY supports USB. I cam to this conclusion throgh two facts:
The documentation on the download page, when you look at the details says only supports USB. This is true for G510A and G510G. I didn't try G501N, as it is wireless. Maybe it is really Wire and Wireles . . .
I can't get the setup Wizard to try to find the printer through anything but USB.
How do I get Windows 7 to recognize this WIRED (e.g. Cat7 cable) HP All-in-One printer?
Thank you?

Hello,
Thank you for the very quick reply. I will try the download link you gave me.
As for the documentation, I looked again and what I'm seeing says Windows 7 and does say for "USB only." I page and what I'm reading are:
URL: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-4500-All-in-One-Printer-Series---G510/3...
The text I'm reading says:
Details
The Full Feature Software and driver solution is the complete software solution intended for users who want more than just a basic drivers.
IMPORTANT NOTES
For Windows XP SP 1 Starter Edition and Windows Vista Starter Edition
Only printer drivers and the Toolbox are available
Is supported for USB only
Hardware Setup Wizard is not available
After downloading and installing this software, I got two icons on the desktop. They both (in their own ways) insisted on using USB to connect to the printer. One was a HP Solution Center and the other a HP Printer Setup icon/program.
Again I'll look at your download. Hopefully, it will be what a wired printer needs to print and scan! :-)

Cannot complete wireless setup for Officejet 4500 G510n using HP Installer

Hi,
I hope someone can help me with this problem.
I bought an Officejet 4500 G510n and all was working fine on my old MacBook laptop. I have recently switched to a MacBook Air running OS X 10.8 and I can no longer connect wirelessly to this printer.
I have tried the following:
- resetting printer settings from OS X "Preferences" using USB cable.
- disconnecting USB cable to printer.
- downloading and installing the latest software drivers for OS X 10.8
- reconnect USB cable to printer to start printer setup.
The problem arrises when I am performing the set-up task:
- Screen shows invalid network details and gives me no option to continue.... only to go back to the previous page. I am stuck with no options at the moment.
Attached is the screen-shot of what I'm seeing.
Any help would be very grateful.
John

From what you describe, you are using a USB cable but the information displayed there is for wireless. What you would want to do is install the printer using the USB cable and selecting USB installation, then use the software to complete the USB to Wireless conversion.
Either this, or you can set up the printer on your wireless network using the wireless setup wizard and then install using Networked - Wireless as the installation type.
Happy Holidays!

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Link to Windows 8.1 Printer (Fax, Copy and Scan) Drivers for OfficeJet 4500 G510n-z

Hello:
Need to know where I can find updated drivers for my OfficeJet 4500 G510n-z printer. I am using Windows 8.1 operating system.
I have tried using the link at HP, but at the point that it supposedly gets to the install window, it asks me to insert the disc that came with the printer. When I do that, I still get an error message saying something like "the link cannot be found." I also get another message at some pont indicating that the full version needs to be uploaded. Then, the same process starts all over again. I should add that the printer disc says that it is compatible with XP, Windows 7 and other earlier versions, but not 8 or 8.1
I have tried this 6 or 7 times with the same result. Dell (the company from which I bought the laptop) was useless and suggested I contact HP.
I can no longer scan, either, because the computer isn't recognzing that the printer has a scan function, so when I go to use PaperPort 12 to scan stuff, it doesn't recognize that a printer is attached.
Any help resolving these problems would be greatly appreciated.
Thanks!
This question was solved.
View Solution.

Oops! Thanks "Shlomil" not "Shlomi" - Sorry!

Power cord part number for Officejet 4500

I have lost the power cord to my OfficeJet 4500 wireless printer, Prod #CQ663A#1H3 and need an orderable HP part number? Does such a number exist?? Please help.....

Hi,
The power module and power cord can be ordered from following link.
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=525263ED17684FD4B7127D173B4B85E8&Searc...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

What is the address for warranty returns

We had an issue with a lightning cable and were sent a new one under warranty, well my three year old decided to cut up the envelope and return address label for the old cable to be returned. What is the address to send this back?

This is where I mailed gear for service. I'm assuming it is the same address for walk-ins
15955 Alton Parkway
Irvine, CA 92618

How long does it take to download and install full feature software for Officejet 4500 g510g-m?

I have been updating my software in hopes I can get my Officejet 4500 g510g-m to work wirelessly but the full feature software has been at the "installing software" stage for over an hour. Is this normal? Also, anyone know where I can find a step by step guide on setting up my printer for wireless use? Is it even possible?

The download speed is dependent on many things, but is often a factor of your Internet provider's service. If you are on basic DSL, then over an hour is not out of line. If you are on cable, something is wrong.
Try this for a guide: www.hp.com/go/wirelessprinting
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

What is the address for a web feed???

I have a new blog and tried to link to it from facebook, but the program asks for a 'web feed' can anybody tell me what that looks like (I am using a .me account)
The blog address is " http://web.me.com/egmont/iWeb/Site/Blog/Blog.html "
THNX for your help!, egmont

egmont ~ When viewing your blog page in Safari, you should see a blue RSS button in the address bar. Click on it and your "web feed" may be revealed as:
http://rss.mac.com/egmont/iWeb/Site/Blog/rss.xml

What is ip address for officejet 4500

Similar Messages

Maybe you are looking for