What is Language And Package According to SAP

HI All,
What is Language And Package According to the SAP Environment ????
Or
According to Other Environments Also.
Regards
Vamsi

Hi vamsi,
Language: Languages are used to develop packages, applications..etc (more over they are communicate platforms between human beings and system)
Eg: c,c++,,java, ABAP..etc
Package: These packages are developed by using some languages are used to fulfill specific goals for which they were developed.
Eg: MS-office, open office, mage maker.... etc
Thanks and regards
Harsha
**Reward points if found useful**

Similar Messages

What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run.

What is OLTP and OLAP in BW .

Hi friends
Q: what is OLTP and OLAP.
Q: SAP-BW follows which process OLTP or OLAP and explain the difference.

Hi Vrushabh,
Ans-1. OLTP vs OLAP
OLTP : Online Transaction Processing (Operational System)
OLAP : Online Analytical Processing (Data Warehouse)
a. Source of data
OLTP : Operational data; OLTPs are the original source of the data.
OLAP : Consolidation data; OLAP data comes from the various OLTP Databases
b. Purpose of data
OLTP : To control and run fundamental business tasks
OLAP : To help with planning, problem solving, and decision support.
c. What the data Reveals
OLTP : A snapshot of ongoing business processes
OLAP : Multi-dimensional views of various kinds of business activities.
d. Inserts and Updates
OLTP : Short and fast inserts and updates initiated byend users
OLAP : Periodic long-running batch jobs refresh the data
e. Queries
OLTP : Relatively standardized and simple queries Returning relatively few records.
OLAP : Often complex queries involving aggregations
f. Processing Speed
OLTP : Typically very fast
OLAP : Depends on the amount of data involved; batch data refreshes and complex queries may take many hours; query speed can be improved by creating indexes
g. Space Requirements
OLTP : Can be relatively small if historical data is archived. OLAP : Larger due to the existence of aggregation structures and history data; requires more indexes than OLTP
h. Database Design
OLTP : Highly normalized with many tables
OLAP : Typically de-normalized with fewer tables; use of star and/or snowflake schemas
i. Backup and Recovery
OLTP : Backup religiously; operational data is critical to run the business, data loss is likely to entail significant monetary loss and legal liability
OLAP : Instead of regular backups, some environments may consider simply reloading the OLTP data as a recovery method.
Ans -2 SAP BW follows OLAP.
Reward points if helpful.
Regards
Hemant

How to select the business object in ESR and the packages used in SAP 7.1

Hi
I am trying to use the Service interfaces of ESR available in ESA ECC-SE 604 and a few in SAP APPL 6.04.
How can we choose the GDT,Business objects or Service interfaces for the requirments?
Can we know which package provides which objects like what are the available things in ESA ECC-SE 604 and when should PI or ECC use it.
I am trying to create functional location Service interface(Installation Point ) and Equipment (Indivisual Material) for untillities requirment.
Thanks in Advance

Hi,
For choosing the GDT, Business objects or Service interfaces for the requirements you first need to create dependencies between the components. For that read the "Defining Dependencies Between SWCV and EnSWCV in SLD" topic from the following link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d]
SAP has published all Services that support SAP Business Suite functionality on the Enterprise Services Workplace in the SAP Developer Network (SDN). You can refer that for getting the information of different services and their objects.
Regards,
Jitender

How do I install language package in my SAP environment?

HI
After installation of sap netweaver server I need to activate a new Europe language as default language ( DA) package?.
I got the language pack on a DVD.
I did :
1.     /nSE38
execute Program = RSCPINST -> click execute icon
under Enter Languages -> add Denish (DA)
click SIMULATE button at top bar
simulate OK then I click ACTIVATE button on top bar.
2.      /nSMLT
Select from menu LANGUAGE -> CLASSIFY
Language = Denish
Supplementation Language = English
click SAVE disk icon
highlight Denish then select LANGUAGE -> IMPORT PACKAGE
Language = Denish
Path = c:\language\DATA_UNITS\DA
UnderDATA_UNITS directory I have 2 file
     - DANW7011.PAT
     - PRODLABEL
Which one should I use?
The installation looking for a u201C.car or .saru201D file.
But there is nou201D .car or .saru201D file dere. Is it some help there?
Thanks

Hi,
Can you please copy the .PAT files to <DIR_TRANS>/EPS/in directory and then try again?
Also, let SMLT search this directory. A .SAR file is basically like an archive which has 2 files inside it: an .ATT file and a .PAT file. .PAT file contains the actual patch that is imported.
Try and let me know.
Thanks,
Shitij

HT4993 i did a master reset on my iphone 4. now when i try to set the phone back up from the start i put in the language and country, I hit next and it takes me to a screen that says connect to itunes, then will not me go any further, what do i do?

i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help

Connect it to your computer via the supplied sync cable and restore.

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

What is the difference b/w the sap r/3 platform and netweaver?

what is the difference b/w the sap r/3 platform and NetWeaver.
do both go hand in hand .......
i am relatively new to ESA....
if one want to manage databases will he use sap/3 or NetWeaver...
is NetWeaver is additional functionality incorporated in r/3 to mange it strategies......

Hi,
Check out this forum posting. I think it covers the question - it has been asked a couple of times.
netweaver vs mysap
Cheers,
Mike.

Just purchased new ipad. screen in foreign language and says "Dand dat Ngon ngu. What's that all about?

Just purchased new ipad. screen in foreign language and says "Dang dat Ngon ngu? What's going on??

The easiest AND quickest way would be to reset the iPad and start over.
Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset.

I've downloaded the new version according to Creative Cloud but when I try to launch the app the window appears saying there is a new version, so I click on download now and it crashes. What's happening and what should I do? Thanks.

I've down loaded the new version according to Creative Cloud but when I try to launch the app the window appears saying there is a new version, so I click on download now and it crashes. What's happening and what should I do? Thanks.

Thank you so much. I finally got it to work. I don't know why it has to be such an ordeal when it comes to Adobe products!
Todd
Todd McVey
Art Direction
201-723-0104
[email protected]
www.toddmcvey.com
@mctwitthis

I have an amount of 0.78 euro in my account and i want to spend or just waste it so that i will be able to change my language and located to Ghana instead of Italiano, what do i do ???

I have an amount of 0.78 euro in my account and i want to spend or just waste it so that i will be able to change my language and located to Ghana instead of Italiano, what do i do ???

Click here and request assistance.
(63513)

What is main deff between indian payroll and us payroll in sap abap hr

HI Experts,
what is main deff between indian payroll and us payroll in sap abap hr.
Regards
Naresh

Hi,
U.S payrolls:
SAP has given country specific payrolls for more than 40countries Each country specific version is called country version. Every country has a country specific payroll driver and pay roll schema based on modular international payroll driver and schema. When sap says country version it includes country specific civil, tax laws, contributory and other tax laws (all these details are populated in the country specific info types).
Some of them are:
- Personnel data -address-6, bank details-7, personal data-2, challenges-4 etc..
- Actions -0000 info type
- Organizational data
So when you run a payroll for a specific country, besides general information valid for the international pay roll, one needs to enter specific details in the particular info types for example if you are running U.S pay roll you need enter SSN no. to uniquely identify an employee in the info type 0002-personal data.
Besides the common infotypes these are some of the U.S pay roll specific infotypes that one has to configure in U.S pay roll.
- Garnishment Order - Info type 019
- Creating a Garnishment Order - Info type 0195
Inidan PayRolls:-
Indian pay roll besides common info types, uses specific info types from 0580 to 0590 and 0045 (loans infotype) -- these info types will capture the data related to all the major components of Indian pay roll.
Hope this is helpful,
Thanks
Kalyan

How to fetch what are all the tables used in this TR no and Package name of

Hi Friends,
I have input of Transport Request no (E070-TRKORR).
How to fetch what are all the tables used in this TR no and Package name of this Table.

HI,
FYI
SELECT E071OBJECT_NAME, E070MDEVCLASS
FROM E071, E070M
WHERE TRKORR = YOU REQUEST NO.

What is the difference in 4.0, 4.6 and ECC versions of SAP?

Hi
What is the difference in 4.0, 4.6 and ECC versions of SAP?
Thanks

SAP R/3 is basic ERP that every one keeps talking about which has got different versions ike 3.1, 4.0, 4.6, 4.7. The latest one in this is the ECC which again has got two versions in the market - ECC 5.0 and ECC 6.0.
NetWeaver is the techology stack which gives other solutions that work with R/3 and also provide a technology platform for the ERP to work.
EP - Enterprise portal is a part of the NetWeaver stack and can be used to provide web interface for the user apart from the standard protal functionalities.
You can find more details of NetWeaver here
http://help.sap.com/content/documentation/netweaver/index.htm
and also check these..
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/frameset.htm

What are all the components and attrubutes of the SAP script

hi
what are all the components and attrubutes of the SAP script
please reply
thanks in advance

Hello Ashok,
The componest of the Script are:
HEADER,PAGES,WINDOWS;PAGE WINDOW;PARAGRAPH FORMAT AND CHARACTER FORMATS.
THE HEADER WILL HAVE THE ATTRIBUTES OF THE SAPSCRIPT LIKE
DESCp.PAKAGES Etc.
If useful reward points.
Regards,
Vasanth

What is Language And Package According to SAP

Similar Messages

Maybe you are looking for