What is latest NTB version and which FF version works with it?
I "had" FF12 and norton update somehow killed my norton toolbar. Since then, it's been almost three hours with norton tech remotely connected to me, uninstalling and reinstalling norton and FF. Rebooted about 25 times and used norton live update probably 50 times. Tried FF12, FF13 and FF14. Nothing worked, and now Java is disabled. Going in a circle;
Oddly enough, I can't find out from norton what is their latest V, and since the norton toolbar is popular, hoped someone here might know. thanks
Basically, Norton Toolbar doesn't support any version of Firefox older than 13. What you should be doing is this:
Use Firefox 15 ([http://www.getfirefox.com www.getfirefox.com])
Then, after that, update your Norton and your toolbar should work.
[https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-15-Support-for-Norton-Toolbar/td-p/791174 https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-15-Support-for-Norton-Toolbar/td-p/791174]
Just as a side note, most the features from norton toolbar are built into Firefox by default, so you don't even really need to use it.
Similar Messages
-
PSE13 trial version and it will not work with Windows 7
I have downloaded PSE13 trial version and it will not work with Windows 7
I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne -
Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
However, since getting a new laptop it doesn't work with Office 2013.
Can I upgrade to Standard XI?Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).
-
hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device
Google "iOS versions" and read the first match (Wikipedia)........
-
i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better
There is no need for anyone to use 32-bit version anymore.
Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
Better support for today's hardware with larger video graphic memory and systems.
Better memory management. -
What version is the latest measure and what versions of Excel will it work with ?
What version is the latest measure and what versions of Excel will it work with ?
The most recent version is Measure 2.0 and the data sheet states that it works with Excel 97 or later.
http://sine.ni.com/apps/we/nioc.vp?cid=1450〈=US
Hope this helps.
Regards,
Erin -
Will Safari 5.1.10 work with all versions 10.6 or does it require 10.6.8? If it does require 10.6.8 then what is the latest version of Safari that will work with 10.6.6?
Thanks
EricThis Mac currently has Safari 5.0.4. Software Update shows a newer version of iTunes and of course the combo updater to 10.6.8 but nothing else. I imagine the 10.6.8 updater contains a later version of Safari but I don't now which version it is and whether it is backward compatible with older versions of 10.6. There are a number of newer versions of Safari: 5.0.5. 5.0.6, 5.1.1, 5.1.2, . . . 5.1.10 to name a few but would any of them work with 10.6.6? In a similar thread a guy asked a similar question to mine: he had 10.6.6 and wanted to upgrade to a newer version of Safari. He tried installing various versions but was rejected each time. He finally asked if there was any newer version of Safari that would install on 101.6.6 - but he never got an answer.
Software Update displayed a newer iTunes but no mention of Safari. I wonder if this indicates that the 5.0.4 Safari that I have is the latest version there is for 10.6.6. Anybodyknow for sure?
TIA
Eric -
What is the latest version of Firefox that will work with Windows ME?
We were recently given an older Gateway laptop that we intend to use solely as an internet terminal. Alas, it is running Windows ME and I don't even know if it has all the specs to upgrade (and certainly not to Vista, which is the only thing we have an install disk for). It currently has Firefox 2.0.0.20, which of course contains numerous security vulnerabilities and is incompatible with most newer plugins. What is the best version of Firefox that will work with Windows ME, and is it still available for download? Thanks!
Hmm... guess this will be just an e-mail terminal, hardly anything else works cuz I can't update Flash! Thanks for your help.
-
Manadatory SP stack and which kernel version for source Release 4.6c
Hello!
I have the following questions:
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- Has the SAP Business connector still any supports?
And some additional question regardind connection Lotus Notes with ERP 2005:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
AxelFirst I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
> Do you all do Unicode Conversion first before going for upgrade process ?
4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
Markus -
What is difference between 4.6c version and 4.7ee version
Hello to all,
Pls, help me.
what is difference between 4.6c version and 4.7ee version?
It is urgent tommorow I have an interview.
thanks & regards,
raju.Hi
Check these links
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
One major difference is that 4.6 runs on what they call the basis layer, in 4.7 the basis layer was majorly modified to include new web technologies, hence the renaming of Basis to Web Application Server. 4.7 runs on the Web Application Server 6.20. With this, was the introduction to BSPs or Business Server Pages.
Also have a look at the link:
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Here is a quick short list though:- Statements for character processing have additions IN BYTE MODE and IN CHARACTER MODE, this affects statements like DESCRIBE LENGTH, OPEN DATASET
Header lines should not longer be used for tables (in OO context this is not even possible)
TABLES statement in reports should no longer be used
PNPCE for concurrent employement (new logical DB for HR)
For OO abap there a plenty of short forms for method calls that were not previously available.
One very cool feature is that data reference's can have actual data types and van be referenced directly without field symbols.
Additions to many abap statements, for example there is now a ALL OCCURENCES addition to the replace statement.
Class based exceptions are now available (although it is debatable how usefull these are seeing as there is no FINALLY part to the try catch statement, very disappointing but maybe that is just me).
Friends have been introduced for OO abap.
Dynamic program has plenty of improvements, for example there is now a TYPE TABLE OF variant for create data which lets you dynamically create an internal table with a structure type, your can also now call a class constructor with different importing parameters dynamically.
Regards
Kiran -
I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks
I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise. -
What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does
What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does.
http://roaringapps.com/apps:table
-
What is the latest version of iMovie that will work with OS 10.7.5?
What is the latest version of iMovie that will work with OS 10.7.5?
Hi magicmidi,
If you are interested in the system requirements for the various versions of iLife, you may find the following page helpful:
iLife: System requirements
http://support.apple.com/kb/ht4411
Regards,
- Brenden -
I have Photoshop Elements 9 and use a Nikon D5100. I have downloaded camera raw 6.5 but cannot download photos to it. Does camera raw start automatically or do I have to manual start it?
That did I, thanks.
99jon <[email protected]> wrote:
99jon created the discussion
"Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
> -
Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!
I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
But the answer is that it doesn't really matter - just make certain to get 1333MHz.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display
Maybe you are looking for
-
After closing serversocket, process remains
Hi everyone, I'm trying to learn to write a client/server program. I begin by creating a serversocket and waiting for data. When I close the program, the serversocket still remains even when I create handlers that try to close the socket after the GU
-
Hello I want to create a textfield that only allows user to key in numerics and with fixed character length (means only a fixed length of characters can be entered). I have viewed this post: http://forum.java.sun.com/thread.jspa?threadID=536977&messa
-
Hi There I am using Robohelp HTML 6 and I want my links to be relative links not absolute links. Any ideas? All the links I try to do go back to my C drive instead of to another page within the Help. Thanks
-
Is the word count in Pages inclusive of footnotes?
-
NFS or FTP for file on Ip 10.x.y.z
Hi Experts, I have a file to file scenario up and running.I have tried using NFS posted the files on XI server usr/sap/server/test/source.xml Now they want to see it picked up and dropped to a particular folder on a particular IP do i use NFS or ftp?