What is limit to load csv file for Apex Utility?

What is limit to load csv file for Apex Utility?
How many records can I load through apex load utility?
I am loading csv files.
Thank you.

Hi,
You download the report that is displayed in APEX which is limited to 65k. There may be some way of creating a custom file based off the table rather than using APEX's built in export to csv option but I don't know of any being released. Denes produced an export to .xls option but I don't know how many rows that caters too: http://htmldb.oracle.com/pls/otn/f?p=31517:108:1512181285516724::NO:: -- I assume 65k too though.
Mike

Similar Messages

  • How to handle comma present in any filed while loading CSV file in APEX

    I am trying to import excel sheet data into a table. I have followed steps mentioned in below link and they work just fine with one exception.
    http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
    Exception is related to presense of comma (,) in any particular filed like- Address.
    How can I handle this situation? I am using APEX 3.2
    Thanks,
    Abhi

    Yes this is correct.
    but problem will occur when e.g check the foll. string.
    (1001,And I quote "This, will work")
    Here it is a comm(,) in b/w "This and will".
    due to this sqlldr interpret it as end of field. and throws an error.
    I had gone through expert one on one oracle, what it maintioned as,
    put an extra double quotes( " ) like " " to enclosed the double quoted string.
    This works fine. For small data it can be done manually.
    But for large data what condition can be put in the ctl file to achieve this?
    or is there any other way to achieve this?
    Thank you.

  • Error 4 when loading flat file for Demo cube

    Hi gurus
    I've exported the csv file for 0D_SD_C03 and store it on my local disk.
    when i try to preview the file using the file that i stored in my local drive , the execution close w/o any error message but during loading it shows no data found. ( i have tried to open the file before execute the loading and the system prompt with an error message saying the file  is open) .
    When i tried to store the file on the application server and execute the preview it says that error 4 occurred.
    Can anyone suggest what happen and how to rectify this
    Thank you

    Hi,
    The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
    Check if the flatfile in .CSV format.
    Thanks,
    JituK

  • How to search a .csv file for data using its timestamp, then import to labview

    Hi, I'm currently obtaining density, viscosity and temperature data from an instrument, adding a timestamp and writing it to a .csv file which I can view in Excel. This works fine (see attached code) but what I need to do now is to search that csv file for data which was obtained at a certain time, import the temperature, density & viscosity values at this time back into Labview to do some calculations with them, while the data acquisition process is still ongoing.
    I've found various examples on how to import an entire csv file into labview, but none on how to extract data at a specific time. Also, whenever I try to do anything with the .csv file while my data acquistion VI is running, I receive error messages (presumably because I'm trying to write to and import data from the .csv file simultaneously). Is there some way around this, maybe using case structures?
    If you need to know my skill level, I've been using Labview for a few weeks and prior to that have basically no experience of writing code, so any help would be great. Thanks!
    Solved!
    Go to Solution.
    Attachments:
    Lemis VDC-30 read registers MODBUS v5.vi ‏56 KB

    It sounds as if you are going about this a little backwards writing to a data file and then extracting from the file but its the weekend so I can't think of an improved way to do it at the moment. 
    Searching for a specific time with those specific values is quite easy, or if you wanted to select any time then you could interpolate the values to find any value that you want (This is where the contiguous measurement comes in, as you have readings at discrete times you will have to interpolate the values if you want to get the 'measured value' at a time point that is not exactly one of your measured points).
    If you can extract the TDMS time column and the T, D & V then simply thresholding and interpolating each of your array/data sets should allow readings at your desired times.
    Attachments:
    Interpolate.png ‏301 KB

  • Load .csv file data with OWb Process flow using Web

    Hi,
    I Have a file in my local machine( Machines on multiple user's), need to load data through Web user interface.
    Let's say have a web page with multiple radio buttons respective to different sources, by clicking on each button will pass the path of .csv file to through Application, (API or Java programming interface) execute owb Process flow as a accepting file path as a input parameter to execute for loading purpose.
    Should facilitate view data, Update data through web based on user requests.
    Need your guidence how can i implement this with OWb 11g R2.
    Assuming with Web browser functionality. Please confirm it and if yes, please throw some light how could be the steps to implement.
    Thanks

    Hi David,
    Thanks for your reply.
    Undersatnd your proposed solution.But my requirement should be as follows.
    1. Currently under consideration using web page likely to be implement with Java, allowing users to load .csv file data into staging area.(Loading flat file into Data abse table)
    Case 1, Assuming OWB software is not installed on user machine. I think no.
    Is it possible through web page (this case Java page) to trigger java procedure/Pl/SQl procedure or integration of both to laod data into staging area.If yes, how it could effect performance of data load with 1 GB file.
    Case 2, OWb client software installed on User machine, while runtime passing parameters means passing manually?
    In case it is automated, how should i pass machine name & Path to owb runtime web browser.
    Could you please show me guidence how should I acheive this functionality with APEX customization part?
    Thanks agin for your support.
    Anil

  • HT2486 how can I export the contact book data to a csv file for editing?

    how can I export the contact book data to a csv file for editing?

    You can edit a card right in Contacts. No need to export and re-import.
    Select a name and on the right side, click the Edit button:

  • Csv files for OBIA procurement and spend analytics

    hi,
    which csv files we need to configure in order to install OBIA 7.9.6.3 procurement and spend analytic for EBS R12 1 3 as source?
    In documentation, oracle given set of files for 11i & R12? do we need to configure csv files for both version ???
    As per documentation,counter files for , CSV files req for source as 11i are not there in R12???
    please guide???

    Hi,
    To be safe, configure all of the domain value files documented in the section http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/configsupplychain.htm#CACIEBBH
    Do this regardless of whether they state 11i or R12 in the filename. Some of the files have not changed from 11i adapters, so the filenames have not been updated e.g. domainValues_Employee_Expense_Type_ora11i.csv
    Please mark if helpful / correct,
    Andy
    www.project.eu.com

  • How can i get sample CSV files for Demo BI Content

    Hello Experts. Documentation say that there is sample CSV files for modules that come with delivered BI content. I am planning to work with the demo content which i have already installed. I then need to populate the objects with the relevant demo data that is said to be in the CSV files that come with the demo content. Please let me know from where i can get these CSV files. Good day.

    Hi Huggins,
    There are sample csv data in AL11 in the work directory.  You may want to look through here to see if the csv files you require are there.
    Thanks,
    Nick.

  • Update on importing csv file for drop down options

    My search on this topic provided me with a suggestion for the capability to upload a csv file for drop down options.  However, the discussion was from April 2011.  Has any progress been made on this since?
    Thanks.

    This is not something we currently support but you can add or vote on feature ideas:
    http://forums.adobe.com/community/formscentral?view=idea
    If you need to add a new idea click "Create an idea" under "Actions" in the top right.
    Thanks,
    Jeff

  • DRM and configuring CSV files for OBIEE apps

    How does DRM impact configuring the CSV files for Informatica on the OBIEE apps?
    Do we still need to configure the buckets in the CSV for chart of accounts, custom calendar etc?

    Hi,
    I am also trying to integrate DRM with OBIEE. can you please provide me more details on this. also i am trying to build a report with tree formate to represent DRM hierarchy. can you throw some light on this?

  • Sample CSV file for Master Schema Upload in CCM

    Hi All,
    Can some please send me a sample CSV file for Master Schema Upload in CCM to my ID <i>[email protected]</i>. Points will be awarded for the same
    Regards
    Hari

    Hi
    Sent the same to your email id. )
    Regards
    - Atul

  • Failed to load configuration file for the workflow

    There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I  tried opening his workflow and got
    the error "Failed to load configuration file for the workflow."
    Any ideas?

    Hi Carltonw1,
    Based on your description, I recommend to verify the things below:
    Clear the SharePoint Designer cache and then open the workflow.
    Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
    Ask the user to create the same workflow and associated with another list to see how it works.
    Check the ULS log for more detailed error message.
    To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • What version of iPhoto supports raw files for canon 6d

    what version of iPhoto supports raw files for canon 6d? I am running iMac 24-inch with OSX-10.6.8 and iPhoto 7.x, and can't read these files....looking for least upgrade which will enable me to read them.  Thx - //Spud

    Not sure what the oldest version is but Mavericks with iPhoto 9.5.1 does - http://support.apple.com/kb/HT5955?viewlocale=en_US&locale=en_US
    Google may help you go backwards if you do not want to upgrade to Mavericks
    LN

  • How to define table specific QUERY in parameter file for Export Utility

    Hi All
    I am trying to create A SINGLE parameter file for export utility. I have 2 tables and want to use a different QUERY condition for each of these tables. However i do not want to create 2 seperate parameter files for this and run/script exp twice.
    Is there a way to do it ?
    NOTE: I am using normal export utility for Version 9 and NOT oracle data pump.
    Following is an example of what i want to achive in parameter file:
    Tables = (TabA,TabB)
    # for table - TabA
    QUERY = "where id =25"
    #for table - TabB
    QUERY = " where court_id=54 and id >1"
    Please advice on syntax of parameter file so that exp knows that it has to process 1st condition for only TabA and second condition for TabB.
    Any samples/syntax examples are greately appreciated.
    thanks in advance!
    cool tech

    No there is no such alternative. Query condition is applicable to all the tables listed in TABLES parameter.
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1005843

  • Can anyone provide a simple css file for Apex Application

    Hi,
    Can anyone provide a simple css file for Apex Application please don't mention W3schools link to learn...
    Regards,
    Pavan

    in each item have ..HTML Form Element CSS Classes .e.g style="color:red",  you can change whatever you want!
    or using CSS at page header level.
    check the page: http://apex.oracle.com/pls/otn/f?p=25110:3:0:::::
    more css and JS file in Google drive(If my application/js/css breaks your computer, your database, your car's transmission anything it's your fault not mine, I have nothing to do with it and will deny all responsibility.)

Maybe you are looking for