What is "List and Labels"
Hi,
I heared like SBO Report Editor is Replaced by "List and Labels".
what is "List and Labels" and what are the uses.
bcoz i am trying to use crystal Reports.
plz help me asap.
Regards,
Anand
Hi Anand,
If you look at the www.combit.com website you should be able to find out all the info you need regarding list and labels as its an application from them.
Regards,
Adrian
Similar Messages
-
Memo Pad for ratings and labels
Would be nice to have a catalog specific memo pad available to notate what
the ratings and labels one has applied mean in that particular catalog. For
example, I recently opened a catalog I hadn't used in a few weeks and was
puzzled what I had meant by the green labels that were applied to some
images. Because of differing needs for differing sets of images, I can't
have one standardized meaning for all stars and colors and pick flags. So
then we could note Green means "email image", Purple means "Print select"
or something like that...
David MadisonAlong these lines, it'd be nice to tag images with personal text notes like "this is the image that Fred liked", or "needs masking in photoshop"... Then, when you moused-over the image, the note would pop-up in a little balloon.
I suppose you could use the metadata to add notes, but it doesn't work quite this smoothly. -
I have an unknown error labeled -42210. I don't see it anywhere in the list and I have no clue what it does either since everything seems to run just fine. Does anyone know what the error means?
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
What is difference between interactive list and interactive reports?
what is difference between interactive list and interactive reports?
hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat -
What is difference between SharePoint List and Libraries
What is difference between SharePoint List and Libraries
Hello,
You also might want to loot at here:
http://veroniquepalmer.com/2013/02/24/the-difference-between-sharepoint-2010-lists-libraries-and-pages/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d4152cd-92a6-4eed-9a52-a519ec71c674/what-is-the-difference-between-document-library-and-list-in-sharepoint
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?
there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem -
I am trying to polish an application, and find that I cannot seem to reliably control which of the label or caption text appears in the context help window because I don't understand what rules are in place to determine which should appear. It seems like if I reate a named constant, then use it's right click menu command "Create Indicator" I get a control with only a Label (as long as I don't add a caption). This then appears in the context help window as the label name followed by the description text (after entering some description text). But if I add a caption, the label name is shown in bracket
s which is a 'feature' I would like to avoid, because I have certain controls where I would like to use a descriptive variable name on the block diagram side without using so much space on the front panel. It seems like there is no way to avoid showing the Label name in the context help for a control/indicator. Is this true?
I thought the purpose of having a seperate caption was to make the text that appears with a control programmatically controllable, but if that control is not extended to what appears in the context help window, it limits the usefulness of the caption and forces me to re-consider some Label names. However, the problem goes deeper than that because then even when I make the label and caption exactly the same, or if I delete (via a select caption text-backspace or select caption text- delete key .. sequence) the caption for a control, the label name in the context help window still appears in square brackets!
Can I have complete control over the context help fo
r a particular control (or has anyone found a third-party context help solution that functions compatibly with LabVIEW 7 in a built application that they will be so kind as to recommend?)
I have used LabVIEW for three years, and I am now using LabVIEW 7.0.Sorry for that.. I was changing the text of my question and didn't read carefully enough in the preview stage. I wanted it to read "What determines whether the Label name and/or Caption appears in the context help window?"
-
I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)
You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone. -
Whats the difference between list and lov ?
Whats the difference between list and lov ?
i can do the same things with a list what an lov can do .
infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
while the lov can get all the values of items depending on the query.
like
select ename, job, sal from emp
will show all the three items values in lov?Also, if you're looking in the US store, the prices are:
- Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
- Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
- Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
Matt -
Will some explain why apple for the second time manage to screw up and delete "all my play lists and music again"! How can I restore it or get my music back... If I can't get my music back the way it was the last time I used itunes I will sale both my ipod touches!!!
Just what were you doing when it happened?
Just sync it from your iTunes library.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
ghlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?
Holding down the control key will invoke "right-click."
Depending on the View, holding down Shift will with either toggle the selection (Icon View), or it will make a continuous selection from the previous selection (List View or Column View).
The only way to make a continuous selection in Icon View is to drag out a selection marquee around or through the icons.
I can't remember the behavior of previous OS's. -
There's an odd folder on the desktop labeled 8041A210 that can't be deleted. What is it and how do I get rid of it?
Oh, I don't think so. But it's amazing how many problems get solved via Google. Thanks for the star, enjoy your evening.
-
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
What's the difference between tags and labels?
What's the difference between message tags and labels?
Solved!
Go to Solution.Indeed tags are freeform and can be added and created by anyone. Labels follow a stricter hierarchy and are usually defined on the individual community level (e.g. per ideation section, or specific to a discussion board).
Labels are used as a filter by the community team to more easily look at specific sub-sections of content.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
as i upgraded my iphone 4 to ios5 i cant edit my phone list and the i message won't use my phone number, what shall i do
Hi drgpeck,
This article is for a similar issue, and the troubleshooting steps would be recommended for your specific issue:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Cheers!
- Ari
Maybe you are looking for
-
My Firefox 4.0 does not look anything like the videos you show about the features of the new Firefox. My screen looks totally different than yours. It does not have the orange box in the upper left hand corner of the screen. My screen still looks lik
-
Setting the request of follow-on documents
Hello everybody, my issue is the following: I'm using the SAP Supplier Self-Services. When I display the Purchase Order selected from a list, in the field "Requested Follow-On Documents" appears also the voice "Invoice". My target is to remove this v
-
The sign-in graphic changed on my macbook air for no apparent reason. what's up?
The sign-in graphic changed on my macbook air for no apparent reason. What's up? How do I get it back to my chosen graphic and why did this happen?
-
Import tab missing in PO header
Dear gentlemen I do not know how I could configure import POs to have the import tab shown in PO header. Please give me a hint. Regards, Carlos Piana La Universal Guayaquil, Ecuador
-
Using WebUtil Function giving an error
I installed the WebUtil, i executed the demo(example which would have been in installation file which is running on my system) but now i want to open html file in my form using webutils function present in some remote system WEBUTIL_FILE_TRANSFER.URL