What is LRS, and how do I change it to MPEG?

When I tried moving my library between computers, I went through the whole consolidate library, using the iPod as a hard drive spiel. For some reason, all of my songs became what the computer is calling LRS files, and so iTunes will not play any of them. What is LRS, why did they change, and how do I/can I change them back to mp3s and mpegs? Please help! I don't want to lose my library!

that's picas (12 points). change it in your new document setup

Similar Messages

When I click on the "import all" button when downloading my photos I get a message that states that the format is unrecognizable. What caused this and how do I change it so I can import my photos?

I am trying to download photos from my digital camera. I have done this many times before with this same camera; however this time when I click the "import all" button I get a message that states that the format is unrecognizable. It doesn't specify what the format is.
What is causing this and how do I correct it? Any ideas would be greatly appreciated!
Thank you!
Aimee

Make a temporary, backup copy of the library and try the following:
launch iPhoto with the Command+Option keys held down and rebuild the library.
select the options identified in the screenshot.
Click to view full size
Launch iPhoto and try importing again.
OT

What is xmx - and how do I change the settings

I get this error: "Several Java Virtual Machines running in the same process caused an error".
Some brains inhere wrote about this error, and solution should be: "adjust his -Xmx setting down from 512M to 256M."
How on earth do I do that? I don't even know what xmx is? Is it in IE, Windows or Java I should change these settings? Please help. Haven't used Java before.
Thanks a lot.

that's picas (12 points). change it in your new document setup

If I save my Ai file as PDF the colors become washed out.. What is it and how do I change it? I've searched the web for it for hours..

Heres an image of the result.

As for the resolution problem: upsampling an image doesn't improve its quality, because there's simply not enough information there.
As for the warning you get: it's most likely caused by RGB color mode or by placed RGB content that interacts with other content in the file (e.g. because you applied transparency)
In English it's this one:
As far as I see it there's no alternative to learning the basics of printing, color management and transparency. This is nothing that can be done by some forum posts.
Printing:
http://rufus.deuchler.net/2011/06/adobe-publishes-a-new-creative-suite-555-printing-guide. html
You need to understand what's happening on conversion of RGB to CMYK color space, which will happen when printing to offset presses. When you print on office printers, something else happens and all kinds of color may come out, because these machines sometimes do their own color correction and everything depends on how you set up the machine.
Provided you check the PDF in Acrobat: you need to set up color management there as well. This might lead to the differences (greenish) you're seeing.
Find a good book on color management and read the manual:
Creative Suite * Understanding color management (there's more about the subject)
As for transparency:
http://partners.adobe.com/public/asn/en/print_resource_center/Transparency-DesignGuide.pdf
http://partners.adobe.com/public/asn/en/print_resource_center/TXPGuide.pdf
Before sending files to a print service provider you need to get information on how they need the file. Most providers won't accept PDFs generated with "No color conversion". Or they won't guarantee for the output.
What you see on your monitor won't necessarily match the printed result unless your system is correctly calibrated and color management set up. And even then there might be differences.
Can't you contact this former colleague, pay him an amount of money and let him teach you the tools of the trade?

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

You don't need to maintain all versions of the upgrade chain, but many of us do in case we need to work on a legacy file. If you want to rmove a version, though, ti should be done BEFORE installing the later one. Just reinstall CS5 and things should get back to normal.

Macbook has become Macbook(2). What does this mean and how do i change it back?

Hi
The name of my macbook has gone from username's macbook to username's macbook (2). Does anyone know what this mean and how i change it back?
Thanks in advance.

Hi,
This can happen when the system gets confused about some network connection. It can even happen sharing a printer.
It is a harmless bug and you can change it back to its name without the number easily, in the System Preferences, Sharing panel, computer name.

How do I know where my account is registered and how can I change that?

Hi,
Whenever I try to pay Acrobat XI, I get the message that the country of my registration is wrong. How do I know, in which country my account is registered and how can I change that?
It seems, that my account is registered in Austria, but I work now in the Netherlands. What is there to do?
Thanks for your help
Message was edited by: Michael Koller

Hi Michael ,
You can log in to Adobe.com with your credentials and you can change your region or country from the option "Change Region" at the bottom left of the page .
From there you can change your region and select the preferred one and make the payments.
Hope this will work .
Regards
Sukrit Dhingra

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

Hi Larry. I see. It is a file I have worked on previously, and the font is Myriad which I though came with the system. I just changed to Myriad Pro and the pink box disappeared. Thanks for the assistance, I know a new thing!

I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

What is "other" and how to get rid of it?

I have attached a picture of the "other" on my MacBook Pro. I've run CleanMyMac 2, Gemini Pro, and other programs to clean out my computer, and I STILL have tons of "other" files eating up my memory. What is it and what can I do to clean out my hard drive? Thanks for the help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

What is XI and How it can be useful

Hi,
I am new to XI i saw many information about xi in blogs and every thing.. but i need to know simply what is XI and how is it useful for business. what is the backgroud required. how oppertunities for xi in future. Most of the companies requires that one or its optional or mandatory. I femiliar with java i want to move to XI is it good suggition i need any other technologies to update..Is it useful for me..
Thanks,
Kishore

Hi Kishore,
Purpose
SAP Exchange Infrastructure (SAP XI) enables you to implement cross-system processes. It enables you to connect systems from different vendors (non-SAP and SAP) in different versions and implemented in different programming languages (Java, ABAP, and so on) to each other. SAP Exchange Infrastructure is based on an open architecture, uses open standards (in particular those from the XML and Java environments) and offers those services that are essential in a heterogeneous and complex system landscape:
●     Modeling and design of messages, transformations, and cross-component integration processes
●     Configuration options for managing collaborative processes and message flow
●     Runtime for message and process management
●     Adapter Engine for integrating heterogeneous system components
●     Central monitoring for monitoring message flow and processes
SAP XI supports internal company scenarios and cross-company scenarios.
Features
SAP XI is based on general standards so as to enable external systems to be integrated. At the center of the infrastructure is an XML-based communication that uses HTTP (Hyper Text Transfer Protocol). The application-specific contents are transferred in messages in user-defined XML (eXtensible Markup Language) schema from the sender to the receiver using the Integration Server.
In the above graphic, Integration Broker is an SAP NetWeaver capability (that is, the features for a technological area of SAP NetWeaver) that is supported by SAP XI. The Integration Server, on the other hand, is an XI runtime component.
Senders and receivers that exchange messages using the Integration Server are separated from one another. This separation makes it easier to connect systems that are technologically different. Every system that can exchange messages with the Integration Server can also exchange messages with all other systems that are connected to the Integration Server. SAP XI supports the following methods of communication with the Integration Server:
●     Direct communication using proxies, which you generate in the application systems using a description in WSDL (Web Service Description Language).
●     Communication using adapters. In this case, you create interfaces for message exchange in the application system, or use existing interfaces.
Simple message processing on the Integration Server is stateless. This means that the Integration Server does not know of any connections between various messages. Cross-component integration processes, on the other hand, describe related processes, which can use the knowledge about messages that have already been processed to further control the process (for example, waiting for the corresponding response for a message in order to start further actions). You can use SAP XI to model, change, and manage these cross-component integration processes centrally. These processes are executed on the Integration Server and are included in message processing by configuration.
As with cross-component integration processes, you save the entire integration knowledge of a collaborative process centrally in SAP XI: Objects at design time in the Integration Repository and objects at configuration time in the Integration Directory. In this way, SAP Exchange Infrastructure follows the principle of shared collaboration knowledge: You no longer need to search for information about a collaborative process in each of the systems involved, but can call this information centrally instead. This procedure considerably reduces the costs for the development and maintenance of the shared applications.

Bad pop ups and this thing called macsweeper. what us it and how do I get rid of it

I gave bad pop ups and this thing called macsweeper. What is it and how do I get rid of it. Thanks

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Hi. I tried using Pinterest tonight and got a message that I have a bot in my network..what is this, and how do I get rid of it? My phone has been running really slow too on Safari (but not on Google Chrome)

Hi. I tried using Pinterest tonight and got a message that I have a bot in my network..what is this, and how do I get rid of it? My phone has been running really slow too on Safari (but not on Google Chrome)

Google changed their menu bar. Firefox hasn't used Google for the default homepage since the Firefox 3.6 versions. Firefox 4+ versions use '''about:home'''.<br />
http://www.theverge.com/2011/11/29/2598717/google-bar-redesign-rethinks-the-navigation-bar

What is LRS, and how do I change it to MPEG?

Similar Messages

Maybe you are looking for