What is macromedia application server is unreachable

I have tried repeatedly to reach a website which I have visited previously, but continue to get an error message that reads:
macromedia application server is unreachable

Adobe bought out Macromedia years ago. Try the Adobe support forum. 
http://forums.adobe.com/index.jspa

Similar Messages

Macromedia application server is unreachable

Hi, we are running a virtual server (p2v) copy of our
production and dev CF6MX sites.
The virtual copy of the dev server, works fine.
However, in production we are getting the dreaded "Macromedia
application server is unreachable or it does not have a mapping to
process this request" server error. Our prod server was installed
differently as it was originally intended to be a load-balanced
server so the services in prod have "Macromedia" in their names,
not in dev.
I've re-booted the server, restarted IIS, ran the
bin/jrun.exe utility, and am still getting the error. The jrun
utility yielded this message: "warning Could not find valid
replication peer- assuming this server is first server running in
replication group." I'm not sure if this is a show-stopper or not.
I also looked at the server log and nothing looked awry.
Any other ideas ? I've checked the forum here, and someone
posted a link for this, but the link was dead...

"warning Could not find valid replication peer-assuming htis
server is first server running in replication group" is telling you
this is the first instance to start up. Not a big deal (unless
you're expecting other instances to be there already or this wasn't
the first instance you expected to start).
If you changed the name of the server or IP addresses during
your p-to-v process then the xml files may be trying to contact the
wrong IP addresses.
When I get the application server is unreachable error, a
quick iisreset or restarting the World Wide Web Publishing service
will fix it. Sometimes a race condition happens and IIS and JRun
seem to grab the connector at the same time and that error ends up
showing up.

Server Error Either the Macromedia application server(s) are unreachable or none of them has a mappi

Server Error Either the Macromedia application server(s) are unreachable or none of them has a mapping to process this request.I got this error.I installed coldfusion 8 on windows 7 64 bit.What should I do?Can't I use coldfusion?Is there any suggestion???

Yes I google before and I tried to do all advice.But there is nothing change.Can you explain or send a link for solving this?

Server Error - Macromedia application server(s) are unreachable

For my test environment, I've got a ColdFusion 8 instance
running on Windows 2003 Server. Everything was fine until I
rebooted the server. Then I started getting an error message:
quote:
Either the Macromedia application server(s) are unreachable
or none of them has a mapping to process this request.
My first thought was an application mapping error or
something happened to the .cfm mappings. Everything checked out
fine though. So I looked in the wsconfig log files and saw this.
quote:
2008-06-04 16:54:58 jrISAPI[ 760:1048] could not initialize
proxy for 127.0.0.1:51800
2008-06-04 16:54:58 jrISAPI[ 760:1048] Couldn't initialize
from remote server, JRun server(s) probably down.
Something was definitely running on port 51800 though since I
could telnet to it. No clue why it couldn't initialize. Any ideas?
Thanks.
Steve

From what I can tell, this error displays when the web server connector exists, but JRUN (coldfusion) server is not running.
I have spent 3 days trying to repair this error message on my Windows XP CF9 Standard Edition.We had coincidentally made some network changes which I assumed right away was the culprit. When I would try and start the JRUN server manually (jrun.exe) it would fail and the log would specify an error to the effect of:
"RMI transport layer does not exists." <---- not the whole error. But it should be specific enough for someone else with the same trouble to find.
I deleted the web server connector from wsconfig.exe and tried to re-add it. Which also failed:
"Could not connect to any JRun/ColdFusion servers on host xxxxx.
Possible causes:
-Server not running:
-----Start Macromedia Jrun4 or ColdFusion 9 server
-Server running:
-----JNDI listen port in jndi.properties blocked by TCP/IP filtering or firewall
-----host restriction in security.properties blocking communication with server"
I knew then (since JRun was not running) I wouldn't be able to re-add the connector until I resolved the JRUN "RMI transport layer does not exists" error. After 2 days of unsuccessfully making sure I had done everything I could to allow the ports that JRUN needed, I was still convinced this was a port issue. I also noticed that MSSQL Express (unrelated service) was not starting either. STRANGE!!
Decided to run MalwareBytes and after a "Quick Scan", it did find a few infections. I removed the infections and MalwareBytes requested a reboot, rebooted, and VIOLA!! Working.
If your ColdFusion configuration was working (in my case for at least a year) prior to a reboot, and then suddenly can't start itself, be sure to run a scan to remove any infections. I'm assuming my infection was blocking the ports that JRun needed to startup. Good Day!!!

J2EE 13 : what kind of application server?

Hi,
I m using j2ee 1.3 but i m wondering what kind of application server does it use it? I asume it is the j2ee application server... Is there a plugin for eclipse that works with this AS(application server); I ve installed Lomboz but AS JBoss is supportexd, didnt find anything of AS J2EE or Sun one AS. At work we are using j2ee 1.3 and AS Sun one AS 7(or version 8). I thaught J2EE 1.3 uses the J2EE application server ?
Greetz

Do you have an Server Definition File in Lomboz for the Sun One Application Server?

What is really application server do ?

i really want to know what is done by application server. I have a problem once i create a application server it actually do not start. It give a error message like some password error. what i should i do.

Set the envelope return path and an Errors-To: header to point back at your system but with some kind of user-id munged into the mail user-name. You need, of course, a mail receiving system which accepts any of these addresses.
If you receive a mail on one of these addresses it'll almost certainly be an error from a mail transfer agent somewhere along the line.

Either the Macromedia application server(s) are unreachable or none of them has a mapping to process

We have an IIS install on Windows R2 Standard with a few different websites, 2 of which use ColdFusion 9 successfully.
I've added a new website, but could not get CF to work, getting the message above. To troubleshoot, I've done the following:
Restarted the web server
Manually adding the mappings for cfm, cfml, cfc, cfr etc. and restarted the webserver
Removed the mappings, restarted, then readded
These are the mappings that were in the other 2 websites (I also incrementally increased the numbers to avoid duplicates):
*.cfm, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27348
*.cfml, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27349
*.cfc, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27350
*.cfr, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27351
*.cfswf, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27352
Not sure what I am doing wrong and what worse - not sure where to find information to help troublshooting.
TIA to anyone who can point me in the right direction.

Let me make some guesses: is this is 9.0.1 or above, on IIS 7 (not running in IIS 6 compatibility mode), and had you chosen to add “all sites” when installing CF or later running the web server config tool? If so, it used to be that in doing that, any newly added site would inherit CF settings, but with the above configuration you can no longer rely on that. Instead, you have to rerun the web server config tool to again add “all sites”.
This is indeed a radical change in behavior from prior release. It is in fact discussed in the installer (if you do “all sites” during installation), as well as in the CF Admin and Config manual, and in the online help for the CF admin. But there’s not too much talk about it, so people only trip over it when they move to IIS 7 (and 9.0.1 or above, which was the first release to formally support IIS 7 other than in IIS 6 compat mode.)
Let us know if that helps, or if, perhaps this is NOT the problem, in which case it could be any number of things. Even then, if you run the web server config tool and connect that site to CF (or again redo the “all sites” config), does it help?
/charlie

What about other Application Server Integration?!

Is there any plan to get better (tighter) integration with other application servers. What if I want to replace oc4j with other to be my embeded J2EE container?

We already have suppor for easy deployment to other application servers in JDeveloper.
The only embedded server though is OC4J. I think a simple solution to what you want might be to use Ant to build/deploy/run your code.
We have good integration with Ant, and in 10.1.3 it is even better including an icon on the toolbar that will let you run your project's Ant task easily.

What is the Application Server with less errors in the installation phase?

Hi all!
According to your experience, what is the trial version that has less problems to install? Is it for Windows or Linux?
thanks!

Hi
Unfortunately i haven't tried installing any trial version yet and iam not sure about installation errors
they are not campatible with home PCs
Yes i would agree to this i have seen lot of post in SDN there is some problem with vista home edition on Trial versions
I would always recommand to use JDK1.4.2_16 which is more compatable,with 1.4.2_18 and 1.4.2_19 we are currently having massive stack overflow
http://java.sun.com/j2se/1.4.2/SAPsite/download.html
Note 716604 - Access to Sun J2SE and recommended J2SE options
when it get in the Import ABAP phase, it took more than 8 hours waiting for it to be concluded and it didn't! It cannot be normal!
It again depends upon the RAM and the virtual Memory you have and provided
Regards
Uday

What to install to run reports through application server!

Dear All,
I have to run reports developed in Oracle 6i windows platform on web.
I have to install this application server on Linux operating system.
Kindly help me what components of application server 10gR2 I need to install to configure reports.
Is there any tutorial available?
Regards,Imran

I am installing forms and reports services standalone on CentOS 5.Well, CentOS is not certified by Oracle, but it's a Red Hat clone, so you shouldn't have problems.
Nevertheless I have to say that I've never used it for Application Server (I normally use Oracle Linux).
is there any tutorial to install report services standalone on CentOS operating system?Follow the Linux Red Hat sections within above link.

Oracle Application server related issue

My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
Joe

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Reports not running on Application Server 10g Release 3 (10.1.3)

Hi,
I've downloaded Application Server 10g Release 3 (10.1.3) from Oracle website and installed on my system in order configure report server and to run JSP web reports. But i'm unable to run web reports using the above version of Application server.
While checking the componets included in above version of Application server(10.1.3), I found that it doesn't have "Forms and Reports services" included in it.
Could anybody please confirm if its the reason why i'm not able to run the reports. What version of Application server should i download in order to configure and Run Web Reports?
I would appreciate your expert advice on this.
Thanks
Ratheesh

What version
of Application server should i download in order to
configure and Run Web Reports?10.1.2.0.2
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
See also Re: 10.1.3 - Reports Server?

"Oracle Application Server Configuration Assistant" failed, installation...

I have problem to install SOA suite
Indeed it installs and when it come to complete configuration assistants it shows that one of my components failed.
i tried several times to uninstall/install the SOA suite and it failed in the same stage.
can some one give me some hints?
here is the log file enty:
Trying to check if config_order xml is present
The scratch path is =H:\temp\OraInstall2006-11-23_02-08-30AM
The config_order.xml is null
Lowering thread priority for config tool
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'F:\dev\oracle\OracleAS_10\jdk\bin\java -cp F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\ascontrol.jar;F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\log4j-core.jar;F:\dev\oracle\OracleAS_10\jlib\oraclepki.jar;F:\dev\oracle\OracleAS_10\jlib\ojmisc.jar; oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password *Protected value, not to be logged* -oraclehome F:\dev\oracle\OracleAS_10'
Start output from spawned process:
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
Result code for launching of configuration assistant is: 1
The OUICA command is launched from F:\dev\oracle\OracleAS_10\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to F:\dev\oracle\OracleAS_10
Configuration directory is set to F:\dev\oracle\OracleAS_10\cfgtoollogs. All xml files under the directory will be processed
-----------------------------------------------------------------------------please tell me what is Oracle Application Server Configuration Assistant and what effect it will have on my server.
thanks

Hi all,
I've found a solution to this problem. So far I've been trying the installation through MSTSC by taking administrative control (through /console option). Later, I tried my luck by installing it through Net Meeting which proved to be successful.
Hope you can try the same and ged rid of the installation issues.

Defining application server

i know sap has 3 tier str.
DB server -- appl ser -- present ser
It will be very nice of you, if you can explain what is an application server.
Link will be helpful , but if someone can explain in simple words, that will be more helpful
thanks
surjit

go thru the link to know abt application server
http://help.sap.com/saphelp_erp2004/helpdata/en/f0/866c39e979f110e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/54/57fe09786a11d194c90000e8353423/frameset.htm
Message was edited by: Venkat

What are the commands available to read a file from application server and

What are the commands available to read a file from application server and store the file into an internal table?

Hi,
To read a file from an Application Server to an Object there is a command in ABAP called READ DATASET. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
Rewards points for useful answers.

What is macromedia application server is unreachable

Similar Messages

Maybe you are looking for