What is Make System Settings for Measuring Points and Measurement Documents

Dear PM Guru's,
i have doubht on the above customization section? in which situations we can activate or create new one ? whats its importance, how its impacts on our business scenarios. please suggest me and help me. Now i am in realization phase i am not observed much more difference with this check box .
i hope i will get the answer very soonly, and thanks to all of the PM gurus

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

Similar Messages

Unable to Inport Measurement points and Measure documents from R/3 to clien

Hi,
I am not able to import measuring points and measuring documents into the client device even after assigning the measurement point varaint in the back-end config.
Please help!
Thanks & Regards,
Kanwar

Hello Kanwar,
I am thinking of two reasons at the moment.
1. The equipments/Functional location which you had downloaded to your device were not having measurement points. If this is the case, you need to make sure that corresponding Equip/FL's are there on client (provided case 2 is not valid)
2. The measurement points were not replicated. Hope you had checked MEREP_207 table for the required measurement points.
Hope this helps.
Best Regards,
Subhakanth

What are the recommended settings for multiple iPhones and iPads in the same family? I don't want my family members contacts in mine...or them receiving texts that are intended just for me. Help!

I don't want my wife's or children's contact information in my contacts during syncing...or them receiving texts that are intended or me. Can someone please tell me how they handle multiple family members settings in regard to emails, iCloud, and iTunes? Does each phone have a separate computer login, iTunes account or iCloud accounts? Help!

Yes, set them up with their own Apple IDs:
http://appleid.apple.com
An Apple ID may have been entered in the following places:
Settings > iCloud > Account
Settings > Messages > Send & Receive
Settings > FaceTime
Settings > iTunes & App Stores

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

System settings for bdc?

hi frenz!
are there any system settings for running a bdc automatically in background?
the problem i am facing is that my bdc code is running in the background as required in the devlopmant system whereas when i move the same code to the quality system i have to go and execute the bdc explicitly in sm35. Please advice.
as an additional peice of info im using call transaction method and the mode used is P..

HI Payal
I was also once getting the same value of sy-subrc.
My problem was with recording.When i was running in foreground,I was pressing the buttons(ok_code)
but in background it was not possible very obviously
so I checked my recording and the problem was solved.
Secondly, check if you are hardcoding a request no somewhere
as while running a bdc it may asks for a request
but it wont be in quality.
Please revert back in case of problems
Please reward points.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

System Settings for Kodak Zi6

Yikes, this is driving me nuts.
When I export from FCE for youtube, I'm getting some funky borders/margins. And I think it is my system settings.
I'm eager to export to 1280 x 720, as that is what YouTube says is it's max.
What do I set for System Settings for the HD from a Zi6?
Thanks so much.
Brad
For a bonus question, do I have to change the settings when I use lower quality video from my Casio Exilim, which I only rarely use, but sometimes like to mix video from that camera in w/ video from the Zi6
THANKS!

here's the youtube video to see the margins http://www.youtube.com/watch?v=4B9SkvhoUYw

Settings for inspection point user field

Hai gurus,
i want to know the settings for inspection point user field(150)
1) Field combination = 150
2 )Inspection type = ?
3) Functional location- field active = ?(predefined field)
under user field
1)Text length 18 - Field active = ?
2)Text length 10 - Field active = ?
3)Number length 10 - Field active = ?
4)Number length 3 - Field active = ?
5) Date - Field active = ?
6) Time - FIeld active = ?
waiting for positive reply.
regards,
sekar chand

dear Sekar
1) 150 inspection point is maily used for production related inspection. 03 , 04 . it is a freely defined inspection point which means you want to carry out several inspections for each operation during the production process
2) It is not Inspection type it is inspection point type- There are mainly 3 inspection point type
Freely defined - explained
Equipment related - You need this inspection point type if you want to carry out calibration inspections and record the results of test equipment inspections or inspections of functional locations
Inspection points to identify samples-You need this inspection point type if you want to manage samples and record inspection results for physical samples
3) Predefined field is for identification of the inspection point.
Example for inspection point type 1
For inspection point type 1 (inspection point for equipment) that is used, for example, in a calibration inspection, the equipment number must be entered. (To access the results recording function, however, you can use a different key word instead of 'equipment number', such as, 'test equipment').
Example for point 3
The sample-drawing procedure determines the number of samples to be taken. The system automatically creates an inspection point for each sample.
4) User fields are again identification. You can add in key work text which will appear while result recording.
5) Field Active -This helps in sorting out the user fields. An identification field is only active if you have made an entry in this field.Fields with numeric entries are required fields. The numbering sequence that you define for these fields uniquely identify an inspection point.
a typical example can be User field/field active/keyword combination
1)Text length 18 -1 -Inspector Name
2)Text length 10 - 2- Location
3)Number length 10 - 3- Shift No
4)Number length 3 - 4- Section No
5) Date - 5- Date
6) Time - 6- Time
please Date and Time populates automaticaly. it is not mandatory that you use all the fields
Hope this helps
Regards
gajesh

What are the email settings for mac mail

what are the email settings for mac mail

If you mean iCloud email, you can automatically configure this on your Mac runnint Mountain Lion by going to System Preferences>iCloud, signing into your iCloud account and checking Mail. To manually configure it, use these settings: http://support.apple.com/kb/HT4864.

What are Novells recommended settings for policies

Hello,
Who can tell me please what are Novells recommended settings for policies? Should we make a few big Policy where everything is handled (for example a policy for standalone workstations, one for desktop PCs, one for notebooks etc..) or single policies (for example "Desktop Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window minimizing mouse gesture" and so on) and put them in a PolicyGroup. What is the best way?

The fewer the policies the better.
Generally Folks do something such as a WS assigned policy as a baseline
and then a user one to over-ride.
Trying to create one policy per setting would likely cause windows great
confusion as well as being very slow.
On 3/14/2011 7:36 AM, Schneekette wrote:
>
> Hello,
>
> Who can tell me please what are Novells recommended settings for
> policies? Should we make a few big Policy where everything is handled
> (for example a policy for standalone workstations, one for desktop PCs,
> one for notebooks etc..) or single policies (for example "Desktop
> Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window
> minimizing mouse gesture" and so on) and put them in a PolicyGroup. What
> is the best way?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

What are the best settings for a slideshow on DVD

So I'm looking at this helpful article -- http://support.apple.com/kb/HT3781 -- and wondering: if I want to make a slideshow to burn on a DVD to show on a large-screen HDTV, what would be the right settings for Photo Preview and Photo Quality? Thanks!

Mark, yes a DVD will play back on a HDTV, just the quality will not match the capability of the playback device. This is certainly the easiest approach though.
As the article you referenced says, ensuring that your previews are set to a larger pixel dimension than your required output will ensure maximum quality, given that you will more than likely have movement on the images in the slide show I would suggest going with pixel dimensions that are at least 1920px.
Let us know how you go.
Tony

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

System settings for purchasing organization PO01 incomplete

Hi!
I've been doing a vendor evaluation but I got this message: System settings for purchasing organization PO01 incomplete. Kindly assist me where in SPRO can I fix this. Thank you.

hi,
Define Purchasing Organization data for vendor evaluations in transaction OMGL.
Hope it helps..
Regards
Priyanka.P

What is Make System Settings for Measuring Points and Measurement Documents

Similar Messages

Maybe you are looking for