What is Max power consumption of new imac retina with i7

Can someone help me please?

That is not currently published, all we can tell you is what is on Apple's website:
Electrical and Operating Requirements
Line voltage: 100-240V AC
Frequency: 50Hz to 60Hz, single phase
Operating temperature: 50° to 95° F (10° to 35° C)
Relative humidity: 5% to 95% noncondensing
Operating altitude: tested up to 10,000 feet
Is there a specific reason you need to know this?

Similar Messages

What is the power consumption of an iMac in sleep mode?

Like most people, I let my iMac "sleep" overnight with all sorts of things set up on it. I want to buy a UPS to make sure that even if the power is interrupted, it will stay on in sleep mode.
So, my questions are:
How much power (watts) does a 20" Core Duo iMac w/2GB memory use in sleep mode?
How much battery power do I need to buy? (I'm not an engineer; I don't know if, say, 400 watts for 60 minutes would let me use 10 watts for 2400 minutes, etc.)
Thanks!
iMac Core Duo Mac OS X (10.4.4)

I also found this page, which suggests that the Core Duo processor has cool (ha) features:
"the Core Duo processor introduces new integrated per-core digital temperature sensors and advanced thermal management. One advantage of this is that if a sensor shows that one core is running hot, the thermal system will automatically lower the frequency and voltage to both cores to cool the whole chip off."
Supposedly, the Core Duo also has Enhanced Deeper Sleep (yikes) which can take processor power usage down to an amazing 1.8 watts. I don't even know if an off-the-shelf iMac can make use of EDS, which must be enabled in the BIOS of the computer.
However, I still don't have the answer to my question - How much power (watts) does a 20" Core Duo iMac w/2GB memory use in sleep mode?
iMac Core Duo Mac OS X (10.4.4)

XServe dual quad core max power consumption

What can I expect to be the max power consumption of a dual quad-core XServe?
I have four new XServes that I administer in four separate locations and I need to know what Apple recommends for an Uninterrupted Power Supply (UPS) per server.
Right now, I have a 500VA one that I've had on hand at least one site. However, I've noticed that this one, eventhough the UPS has a new battery in it, does not support an XServe -- ie, when I test it, the XServe shuts down abruptly. My guess is that 500VA is inadequate.

What Apple might recommend and what might work in your environment, I do not know.
The APC SmartUPS 1500 works reasonably well for an Xserve and its usual accretion of giblets and accouterments, and Mac OS X Server automatically recognizes this device via its USB connection.
And one thing I've discovered that's not widely listed. Get yourself some short power cords. A handful of appropriately-rated power extension cords (of about one foot in length) makes most UPS products far easier to deal with. These cords are a few dollars each from various vendors, and very useful.

I have a new iMac 27" with osx 10.8.3. My HP C7250 photosmart printer won't function and apple can't fix it thru the update process. What do I do?

I have a new IMAC 27" with a 3TB fusion drive.. I can't get my HP C7250 printer to work. Apple update can't complete their process and is not clear on what to do next. What can I do?

have you tried to download and install hp's drivers from this place?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3382185&lc=en&cc=us& dlc=

Power consumption of the iMac 2007

Hello!
I found at this website: http://www.apple.com/environment/reports/ the reports also for older models of the iMac, but not for mine.
Can someone eventual tell me the power consumption of the iMac 2007 24" in standby- ond off-mode? Or is there an older report from Apple available somewhere?
Best Regards!

It's going to fall somewhere between the idle of 92W and the maximum of 310W. I would aim at around 210-230W.
I run mine on a APC 1500 pro which provides about 15 minutes at 400W. I have other devices on it as well.
I would think at a minimum something like below. This would only provide about 8 Minutes at 300W
APC Power-Saving Back-UPS Pro 700
More Images
APC Back-UPS Pro, 420 Watts / 700 VA,Input 120V / Output 120V

What do u think about the new imac quad, what do u think about the new imac quad

what do u think about the new imac quad, what do u think about the new imac quad?

I think you should buy me one.

LR 5 Crop tool is constantly freezing on a fresh new install of LR 5.4 on a brand new iMac Retina??? What is going on ???

I have lightroom 5.6 installed on a brand new iMac Retina
Running OS X Yosmite
Processor 3.5Ghz i5 Quad Core
32 Gb Ram
AMD Radeon R9 M290X 2048 MB
1 TB Fusion Drive
Application Stored on Fusion Drive
LR Files/Configs etc stored on Fusion Drive
Files are Canon 5D3 Raws
Files stored on external TB2 RAID Drives.
Camera Raw Cache 100 GB
Tried to Purge Cache & Optimised Catalog
Catalog was moved from older iMac to the iMac Retina
I am frustrated and at a loss to understand WHY my Crop Tool constantly causes my LR to freeze? I get the spinning beach ball and it is very slow. Does any one have any idea????
As a wedding photographer, this is slowing down my work flow significantly and its making my work life miserable!

If there are a lot of errors, perhaps the hard drive is physically failing. Perhaps it might be better to simply add a drive to the second slot and install the system on that.

Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

anas guellaf wrote:
it still make 3 bips before starting the IMAC.
That is another problem not related to the Mac OS X version you are trying to use.
Three beeps at startup means you have a bad ram module in the computer. Did you install the ram or did it come from another owner this way? The first problem you need to solve is the bad ram.
When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory? If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
On the bottom of the screen there should be a small door that you can remove with a small screw driver. You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules. You can then put two in (if it has four) and see if it starts without the beeps. Do that with each module so you find out which is bad. Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours. So, you need to talk to Apple and have them send the DVD for your particular iMac.

Just upgraded to a new iMac 5k with OS 10.10. I use Adobe Photoshop CS 5.1 and it won't work! It tells me to install legacy Java SE 6 runtime. Is there a better fix????

Just upgraded to a new iMac 5k with OS 10.10. I use Adobe Photoshop CS 5.1 and it won't work! It tells me to install legacy Java SE 6 runtime. Is there a better fix????

Hi Chris,
Shortly after I got your message below, I got another message that claims it is from "help desk 24x7 has sent you a message - Adobe Forums”.
I am attaching the message. I find it suspicious that it is asking for a Skype ID and a telephone number. What do you think?
Charles Harkins

Finder is really slow ( 15 sec.) after mavericks update on brand new iMac 27" WITH fusion drive...

When looking up files it's fine, but when trying to save or open anything through ANY program, i.e. Adobe CS6 programs, Microsoft Word, but also Apple software, finder is really slow (15 sec. or more of the same spinning beach ball) after the OSX Mavericks update on my brand new iMac 27" WITH fusion drive... This ***** really bad because it totally disturbs the smooth workflow I bought the iMac for in the first place...
Any suggestions?
Already tried 'clearing the plist file' through terminal; didn't work... Rebooting (obviously), didn't work.
Will there be a fix soon?
It's costing me way to much time waiting for the finder to show it's content when working.
Any official word from Apple on this?

I had a similar problem. Tried repairing disk permissions, tried cleaning up with onyx and applejack with no luck. Finally what did work was simply starting up in safe mode (hold shift key down after restart) and it sorted itself out
Hope this works for you

Size of new iMac Retina box package?

I need to know the size of the box package the new IMAC RETINA.
Box package width, height, depth, weight?
Thanks.

Hi Ralph,
do you know what the total weight of the 27" iMac retina is, in the box?
Best,
CDC

Brand new imac Retina and can't enter Apple Diagnostics. Doing it wrong?

I've had various issues with my brand new imac retina. I've spoken with Apple Care about two of them (Finder icon issue; slow shut down) and we're working through it all trying to figure out if it's software and whether the current beta update will solve the problem when it comes out. They've extended their 14 day exchange to 60 days for me while we sort it out.
All said, one thing they suggested was to run the Apple Diagnostics by holding down D upon booting. I've tried running this, it comes to a screen wanting me to pick the language, and nothing happens. It's like it doesn't do anything upon picking the language, just sits there.
The Sr. Tech I was talking with just said "that's strange" but with other things we were discussing he went about focusing on the other things.
I may try yet another separate call to discuss this with them but I thought I'd check here to see if anyone has encountered/solved this issue, see if I'm going about it the wrong way.
I'm holding down D and I'm connected by ethernet. This is the new imac retina 5k, 2014.
Thanks.

Clayton Rhoades wrote:
They've extended their 14 day exchange to 60 days for me while we sort it out.
That's might nice of Apple. Personally, I would not be sorting anything out on a brand new Mac. I would be demanding a brand new replacement. One that is suppose to work rigiht out the box.
I may try yet another separate call to discuss this with them but I thought I'd check here to see if anyone has encountered/solved this issue, see if I'm going about it the wrong way.
I'm holding down D and I'm connected by ethernet.
The techs wanted you to run Apple's Hardware Test. See KB Article: Using Apple Hardware Test - Apple Support
Thanks.

New IMac 27"with dual internal hard drives

How do I manage Data on my new IMac 27"with dual internal hard drives? I have just migrated my data to my new computer. Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog. My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps. Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue. Can Anyone help me?

Install OS X on the SSD:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

My new imac come with snowleopard but i need to install leopard only

hi for every one ,,,
i buy new imac my new imac come with snowleopard but i need to install leopard only but refused any body have idea for this case , becuase i have more special program not compatible to work under snowleopard .
thanks for all
my configuration is
Hardware Overview:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9
Serial Number (system): W**H9H5PC
Hardware UUID: 3A00BABF-810C-57B5-B1C8-E8F7E7074C86

The new iMacs will only work with Snow Leopard, and only the release on the DVD supplied with the computer (the Snow Leopard upgrade disks won't work). The problem is that they require new drivers.

Why didn't my new imac come with an install disk for 10.7??

why didn't my new imac come with an install disk for 10.7??

New Macs shipping with Lion, no longer have Install Discs...
See Here
http://support.apple.com/kb/HT4718

What is Max power consumption of new imac retina with i7

Similar Messages

Maybe you are looking for