What is maximum output audio power in european iPhones with limited sound volume?

Hello all! I need to figure out what is maximum audio frequency power (or voltage on earphones connector) deliveres european versions of iPhones to earphone jack. Maybe I can switch volume limit ON and measure it on american version?
Thank you!

Gabi759,
The output on the Audigy 2 ZS is Line Level. We no longer use amplification on the card as that can cause distortion and an overall loss of audio quality. You may want to look at either replacing your speakers (as few sound cards have amplification) or get a preamp for them to power them.
Jeremy

Similar Messages

  • What cable(s) for audio on hp zr2440w monitor with HP 3005pr port replicator and HP Folio laptop?

    I have an HP ZR2440w monitor.
    I have an HP Folio laptop.
    I have an HP 3005pr port replicator.
    I want to use the monitor's built-in speakers.
    Question 1) What cable do I need to connect the port replicator to the monitor to use the monitor's built-in speakers?
    Question 2) Does the monitor have a built-in microphone?
    Question 2b) If yes, what cable do I need to connect the port replicator to the monitor to use the monitor's built-in microphone?
    Thanks!

    I understand you have some questions connecting the zr2440w monitor to the Hp 3005pr port replicator.
    The back of the replicator should look something like this.
    Question 1) What cable do I need to connect the port replicator to the monitor to use the monitor's built-in speakers?
    The green headphone jack is how you would connect it to a set of external speakers.  If the monitor has its own speakers, it should have a port to match it.  This is a standard 3.5mm audio jack, so any standard 3.5mm speaker cable should work.  I will note that this monitor didn't list any audio input.  Monitors that have speakers usually have an analog audio input jack. 
    Question 2) Does the monitor have a built-in microphone?
    This guide lists all the features of this monitor starting on page 2.  It doesn't appear to have a microphone.  You could still connect an external microphone to the port replicator's microphone jack. 
    Let me know if this answered your questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • What is the proper vehicle power adapter to use with the hp 2000-2a28dx notebook?

    I would like to buy a vehicle power adapter for my HP 2000-2A28DX notebook, preferably by part number, voltage, and wattage.

    I found 2
    http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/AC-Adapters/ER691AA?HP-90W-Noteb...
    http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/AC-Adapters/KS474AA?HP-90W-Smart...

  • What is the Mah Battery Power of the iPhone 3GS?

    Title.
    Thanks.

    Here
    http://www.crunchgear.com/2009/06/19/ifixit-tears-down-the-3g-s/
    it says
    "The battery is 4.51 Watt-hours, or 1219 mAh. That’s about 6% larger
    than the iPhone 3G’s battery."
    Since I've not torn mine down (and don't plan to) I cannot verify their information.
    Phil

  • Activate European iPhone with US iTunes Account

    I hope there are some US citizens living abroad out there that can answer this question...I have a US iTunes account and I want to purchase an iPhone in the Netherlands where I currently live and work. I will of course need to sign up with the mobile provider here, T-Mobile. My question is will I be able to activate my phone bought here with my US iTunes account? My assumption is yes since the two accounts are separate (iTunes and mobile account) but I thought I should try to confirm before I buy the iPhone.
    Hope someone can help! I can't imagine I'm the only one with this question but I can't find the answer anywhere. Thanks for your help!

    Hey! I might be able to help, but it depends on what exactly you're planning on doing that needs you to activate with your US account?
    I'm not sure if iPhones need to be activated with a local account, but wouldn't be surprised if they do.
    If you want to do it in order to buy things from the US iTunes Store though, there's nothing to worry about - you can change which iTunes account (and hence iTunes Store Country) your phone is bonded to for purchases any time you connect to iTunes. (The phone ties itself to whatever account the computer is currently logged into whenever you sync it.)
    Or if you just want to use content bought on your US iTunes account, you don't even need to go that far, your computer just needs to have been authorised by your account to allow it to load it to the phone.
    That means worst case is that you may have to create a Dutch iTunes account to activate your phone with, but you can then switch to using your US one for day-to-day purchases.

  • Audio problem on IPad/IPhone with last version of Edge

    Hi,
    I am developing a website with Adobe Edge. The site contains audio. There are no problems on different browsers (Chrome, Safari, Firefox, Explorer) on the PC and on Android, but the audio does not work on iPad and iPhone. I then tried with a very simple application (a button with the click event that does play an mp3), but that does not work. My brother who has a previous version to the latest (generates file preload.js), the same simple application works on iPhone and iPad. Do you have any help from me.
    Thanks in advance,
    Best regards.

    The patch (EA 2014.1.1) with the fix is live now.
    Regards,
    Vivekuma
    Edge Animate Team

  • What are the benifits of pairing my ipad/iphone with my mac book pro

    thanks

    Having a secure backup in case the wireless devices fail in some way, downloading and installing large updates.

  • Output audio to multiple 24" LED Displays?

    Just purchased 3 24" LED Cinema Displays and a 2009 Mac Pro, and I'm wondering if there is a way/hack to get audio output to go to all 3 displays? I read somewhere about creating an Aggregate Device with "Audio MIDI Setup" app, but no luck, (unless I did it wrong).
    Any thoughts, ideas or help would be greatly appreciated.
    Thank!

    Ok... after figuring out, and setting up an Aggregate Device, I got all 3 Displays to output audio. One drawback... no Master volume control. I can control iTunes volume, but I would like to have a master volume control.
    Any ideas?

  • Output audio aggerrgate

    hi my audio output is Slow i watch lot of youtube i have 5.1 digtal decoder
    it just bugs me when i see mouth movin when i switch my output to digital
    it plays fine i hope when releases 109.1 fix this isuees

    Ok... after figuring out, and setting up an Aggregate Device, I got all 3 Displays to output audio. One drawback... no Master volume control. I can control iTunes volume, but I would like to have a master volume control.
    Any ideas?

  • Portege R500 audio problem: sound volume too low

    The sound volume on my R500 is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the  util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Update:
    Tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • Anyone get to know what's the output power of the audio system?

    Hi. It's there anyone could tell me what's the output power of the 2.1 audio system in this 24" LED display?? Thanks

    Gabi759,
    The output on the Audigy 2 ZS is Line Level. We no longer use amplification on the card as that can cause distortion and an overall loss of audio quality. You may want to look at either replacing your speakers (as few sound cards have amplification) or get a preamp for them to power them.
    Jeremy

  • What's the maximum output voltage of labview

    hi
    i want to give 0 to 10v to the oscillator circuit so for that i would like to know that maximum output voltage of labview because i want to oprate my oscillator using labview program

    hussey,
    this discussion has no worth.
    We KNOW that you want to generate voltage using the programming language LV.
    Since no programming language in the world is able to generate voltage without dedicated hardware, repeating "I want to use LV to generate voltage" several times will not bring you anywhere.
    What kind of hardware do you have for voltage generation mounted in you PC?
    What else do you want to generate except DC voltage (controlling an oscillator could include also AC voltage stimulation...)?
    Norbert 
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • What is the AE's power output in watts?

    Hello!
    I've been unable to find out what the Airport Extreme's power output (not consumption) is in watts.
    This spec isn't on Apple's page of AE tech specs.
    Can anyone tell me and give me a source link?
    Thank you!

    "nominal" would be an average reading over a number of different distances. Readings would be somewhat higher if a computer were close to the router, and obviously somewhat less if the signal has to pass through 3-4 walls.
    The figure doesn't really tell you very much since there really is no way to accurately predict wireless performance in advance in any given situation due to all the variables involved.

  • HT1430 What is the output power,      when using a portable batteries that the iPad need to charge up??

    What is the output power needed to charge a iPad,  when using a portable battery?
    Will 2.1A output work?
    Thanks

    The wall charger which comes with the ipad is a 10 watt charger, it's current is 2A, voltage is 5v. 2x5=10 w.
    2.1Ax5v = 10.5w.

  • Outputting audio from Mac

    What is the difference between using the Mini Displayport to Output audio (such as multi-channel audio) vs. using the optical out (headphone jack) via a TOSlink/Digital Optical cable to an external sound system?

    MIDI is NOT audio, you cannot transport audio over MIDI cables.
    So, does the Yamaha have audio inputs?

Maybe you are looking for