What is maximum size of attachments?

Hi,
Does Mail determine the maximum size of attachment I can send or is that down to my ISP (Telefonica in Tenerife)? I have been trying to send a video It is 177Mb If I can find out what the maximum size I can send is I can trim it down. Thanks for the advice
Message was edited by: RickAu
Message was edited by: RickAu

Mail has no limit on an attachment size. It would be up to your email provider, and they almost always have a limit on the overall size any given message can be. You'll have to ask Telefonica, but I'd almost guarantee that they will not allow an attachment anything close to 177MB. Most providers I'm familiar with have a maximum size of 3MB to 10MB.
I doubt that you'll get your video compressed down to a size you can email without reducing the quality to the point of unwatchability, so I'd suggest posting the video to a web site so that your recipient can download it that way.
Regards.

Similar Messages

  • What is maximum size of attachment which we can upload?

    Hi
    What is maximum size of attachment which we can upload?
    Thanks in advance.
    Santosh

    As per the online help its 9 MB.
    rgds,
    Amit

  • NOKIA N72: Whats the maximum size for RS-MMC??

    Hi guys...
    I am currently using NOKIA N72...I am planning to buy a New RS-MMC..Can you please tell me the maximum size of RS-MMC FOR NOKIA N72??i mean can i buy a 2GB RS-MMC FOR NOKIA N72??...Thanks in anticipation..Cheers...

    Yeah I thought so, how about 4,8,16, and 32GB?
    Feel free to hit the KUDOS button if you think I deserved it.........

  • Maximum size of attachments?

    I have a buyer that would like to upload a 25MB video file to an RFP. 
    I see that in System Properties both our buyside and sellside attachments.maxSizeKB properties are set to 10,000 KB.  What is a reasonable upper limit?  Would I be safe making it 50,000 KB?
    Has anyone had any problems from uploading / downloading very large files?
    Thanks,
    Matt

    Hi Matt,
    You can increase the Max size....
    it will be depend on usage and hardware configuration.
    if the hardware configuration is enough you can increase it to 50 MB.
    ~Ankush

  • What is Maximum size for Multi select list?

    Hi,
    We are using the select_list_from_query given " size=10 attribute " so getting as multiselect list ,but there is a constraint for multiselect list where we can display only 1000 values max i guess,I have around 10,000values to display in list but getting error as given below , how can i overcome this problem in apex?? please suggest me..
    getting error saying : ORA-06502: PL/SQL  numeric or value error: character string buffer too small
    Thanks
    Anoo
    Edited by: Anoo on Sep 2, 2009 8:00 AM
    Edited by: Anoo on Sep 2, 2009 8:06 AM

    First of all, I wouldn't use a multiselect list but a shuttle item since this is much better from the handling point of view. Second, the Patrick's comment is valid. You could use the filetering on the shuttle like in this example
    http://apex.oracle.com/pls/otn/f?p=31517:166
    where your approach would be to show no results by default and give a user a chance to reduce the nubmer of options by choosing some groups from a select list or by typing in some sting.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • What is maximum size of predicate

    I am using oracle8i 8.1.5 and would like to know if the size restriction of 256 for a policy predicate has been increased in 8.1.6, 8.1.7 or 9i. Does anyone know a way around the predicate restriction?

    As per the online help its 9 MB.
    rgds,
    Amit

  • Maximum size HardDrive for Ultra 30

    Does anybody know what the maximum size harddrive is for an Ultra 30.
    I've been able to put a 40+ gig harddrive into an Ultra 5, but the Uktra 30 does not seem to accept a 38+ gig harddrive. It gives a trap error that I can't remember off hand.
    Thank you,
    James

    Hello James,
    larger disks (> 36 GB) should work fine. You might even use one of these 143 GB drives that cost a multiple of what the Ultra 30 is worth.
    Reseat the harddisk, then use probe-scsi-all at the ok-prompt. Is the harddisk detected ?
    Probably your drive was previously used with another operating system and therefore contains partition information (label) that Solaris doesn't like.
    Unfortunately your description is very vague. When did the problem appear (during booting from the first harddisk, when this drive was inserted in the second bay OR when invoking format after booting from CD) ? Maybe the drive is damaged and interfers with the other devices on the SCSI bus (first harddisk, CD-drive).
    In the first case install this harddisk (temporarily) in the first bay (the original one removed) and boot from CD (into single-user mode with verbose display). If the boot fails, the harddisk is bad.
    In the second case it might help if you remove the partition information when installed in the previous system (PC).
    Happy New Year !
    Michael

  • Maximum size of a floating-point number

    Morning all,
    Does anyone know what the maximum size of a floating point number can be under Solaris 8 running on
    a V880?
    Regards,
    Richard Breckon

    I'm not sure what you're asking.
    The maximum size is 128 bits.
    The maximum value is as given in /usr/include/float.h: 1.189731495357231765085759326628007016E+4932L

  • Maximum size of dbms_scheduler.create_job job_action parameter

    i'm running into a problem with the size limit for the dbms_job.submit what parameter... time to move to the dbms_scheduler.create_job package?
    can anyone tell me what the maximum size is for the dbms_scheduler.create_job job_action parameter?
    appreciate any information that can be provided.

    Herald ten Dam wrote:
    But how doy come in trouble with this length, normally a call to a procedure (in a package) and do there the job. Don't program the whole pl/sql (C/Java) in the call. With dbms_scheduler you can make also dependencies between jobs, so it is possible to split the functionality.Yes, I completely agree. The only times that I've put PL/SQL anonymous blocks in scheduler actions is when I want to guarantee the fewest dependencies for jobs (or chain steps) that are really critical, such as when you want to send an email or other notification that a failure has occurred. Otherwise I'd just call a procedure.

  • What is the maximum size for open_cursors parameter in 11g database

    what is the maximum size we can set for open_cursors parameter in 11g database..

    Oracle® Database Reference
    11g Release 1 (11.1)
    Parameter type     Integer
    Default value     50
    Modifiable     ALTER SYSTEM
    Range of values     0 to 65535
    Basic     Yes
    For details, go to the following link:
    http://www.seasongreetings.org/documentation/oracle/database/11.1/server.111/b28320/initparams153.htm

  • What is the maximum size for mailbox per user (Exchange 2007)

    Hello,
    I'd like to know:
    What is the maximum size per mailbox, and is it not recommended to exceed 3 GB and about the items how many is the maximum per folder (inbox, .. )
    I've Exchange 2007 SP2, Outlook 2007 and 2010.
    Thank you.

    Hi
    There is no size limit on mailboxes up to the maximum size of your database.  I normally recommend 2GB mailbox limits if you have some form of archiving in place.  If you have no archiving in place then the limit should be set at the amount of
    data people need to keep - it is not a good idea for people to store mail in PST files because there is a limit on their mailbox.
    See this article for item count recommendations:
    http://support.microsoft.com/kb/905803
    Also you need to upgrade your Exchange 2007 server to SP3 ... SP2 has been out of support for nearly 3 years already:
    Exchange 2007 Support Lifecycle
    Steve

  • What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses. thanks

    What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses.
    thanks

    Thanks for the explanation, it was very helpful
    Paolo Guercio
    Il giorno 11/nov/2014, alle ore 17:00, Vikas.Sharma <[email protected]> ha scritto:
    If you place in Muse - an image with either height or width larger than 2048 pixels - Muse scales the image down proportionately, limiting the larger dimension to 2048.
    However, if you want to use the placed image at its original size, you can scale the image up to desired size either by dragging the resizing handles or by entering Height and Width values in the Control Strip on top. After that, go to the Assets panel and locate the image in there, then right click that image in Assets panel and choose "Import Larger Size". That would bring back the lost image information from the original image.
    Hope this gives you clarity on what you wanted to know.
    Cheers,
    Vikas
    >

  • TS3276 What's the maximum size of an email to be sent by Apple's Mail program?

    What is the maximum size of an email sent in the Apple Mail program?  Is 2.9 MB too large?

    susanzimm wrote:
    Is 2.9 MB too large?
    No, in terms of Mail.app. As WZZZ said, this limit is set by your ISP.
    Yes, in terms of netiquette. Google it. Any file > 1MB is, IMHO, too big for e-mail. Nowadays, this rule may be more relaxed, because more people have broadband. You should check with your intended recipient.

  • What's the maximum size and length that go onto a DVD

    I'm trying to put a whole load of home videos onto DVDs. What is the maximum size that can be burnt onto a DVD. There are a lot of hours on here, about 15 and I was hoping to try and get about 3 hours per DVD is this possible?
    Thanks
    Tom

    If you're referring to a video DVD which will plan on a TV set via a DVD player then a single layer DVD disk can hold 120 minutes of playing time which includes the basic material and any animated menus in the project.
    A double layer disk can hold 240 minutes.
    If you are creating a data disk with the files copied to it then its a matter of grouping the files into batches of either slightly less than 4.7 GB for single layer and 9.4 GB for double layer.
    if you're referring to  video DVD discs follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • What's the maximum size.......

    What's the maximum size of an ImageIcon to be supported by a Label???
    I'm trying to show a 3.5 Mb image and doesn't show it. But a 1 Mb does....
    Can anyone tell me why this happens???

    Well maybe you have to set the size of the Label to the size of the Image - use setPreferredSize() to set the size of the label....
    otherwise you can do something like this :
    //Get the Icon
    icon =
    new ImageIcon(YourFrame.class.getClassLoader().getResource(
                   "/images/yourImage"));
    //Get he Width of the Label on which the Image is placed
    int width = imageLabel.getSize().width;
    //Get the height of the label on which the Image is placed
    int height = imageLabel.getSize().height;
    //Get the Scaled image
    Image scaledImage = image.getScaledInstance(width,height,Image.SCALESMOOTH);
    //Set the Image of the Icon
    icon.setImage(scaledImage);
    //Update the Image Label
    imageLabel.updateUI();
    --j                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Maybe you are looking for

  • Feature Request : provide a way to create access policies or identities with matching condition based on the HTTP header's "Referer" field

    Hello, I have a use-case I would like to share with you. When a customer configures its WSA with highly restrictive internet access like in the example below, it may trigger some issues : 1- allow internet access only for URLs defined in whitelist. 2

  • Mounting 1 TB My Book USB HDD [SOLVED]

    Hey I am new to arch and I ahve tried everything i know to get this working I followed this post, http://bbs.archlinux.org/viewtopic.php?pid=535088 and made the file in /etc/hal/fdi/policy Now I get this error The volume 'PHDD' uses the ntfs-3g file

  • E-Business Suite Tables List

    Hi, is there any formal list of tables for the e-Business Suite? Thanks

  • EJB 3.0 NativeQuery

    I' trying to execute a native sql query, but always fails. If a use the next sentence obtains a nullpoiter em.createNativeQuery("select sum(totalm3) from warehousefloors where warehouse=1); ot when i use em.createNativeQuery("select sum(totalm3) from

  • JTabbedPane removeTabAt - the horror

    aargh, just found a bug that had been bugging me for about 2 weeks by reading the javadoc :-) the removeTabAt method of JTabbedPane states that if will set a component's visibility to true when it's removed so it can then be added to another containe